I'm using the trial version of Elements 11 to see if I should downgrade from an old version of Photoshop. I'm running into two problems:
1) when I re-size an image, it doesn't show pixels in the drop-down box under Document Size, and
2) if I manually re-size an image, I can't get the move tool to nudge it into position.
Level: Newbie'ish OS: Win7 Illy:Cs6
I would like to be able to move an object over just a tad which I believe would be a half of a pixel.
How I could go about doing so or is it not possible?
In ps7 editor I can have 2 pictures cascaded and using the marquee tool and the move tool insert a section of one picture into the other. I cannot do this in ps11, what am I doing wrong?
View 3 Replies View RelatedI'm trying to use the move tool in Elements 12, however it wont let me as it says layers are locked, how I can get the move tool to work?
View 1 Replies View RelatedMove the tool options from being displayed on the bottom of my workspace to the top (like a bar across the top).
I can't seem to find anything to "drag" it or move it.
Win 7 Elements 11
When I click on the Move tool in my Adobe Photoshope Elements 10, it does nothing now. I have to click on the specific layer if I want to move something.
View 3 Replies View RelatedAfter updating to Photoshop Elements 12.1, the move tool can not be used to drag and drop one photo onto another (when more than one photo file is opened).
View 3 Replies View RelatedI am talking about PSE 11. How can I move the tool-palette or the Video window on a second Monitor, as was possible in PSE 10?
In PSE 10 it was possible to use all tools in one palette with one click in the Quick-Mode. Now in PSE 11 we have to open each individual tool before we can use it? After the action this tool closed, so that we have to open it again in the next step. This takes much more time. Is ist possible to switch back to the arrangement of PSE 10?
Every time I try to move a section of a photo with the Rectangular Marquee Tool, I get an error message saying "Less than 50% of the pixels have been selected and they edges of the sections cannot be seen. What am I doing wrong?
View 2 Replies View RelatedI'm in Photoshop CC 3D, and I have a simple scene with one complex object. I can't find any way to move the position of the camera beyond the default positions, like top, front, back. I can do it CS6, but I can't do it in CC. I can rotate the object, but I want to keep the object where it is. I want to move the camera.
View 3 Replies View RelatedI'm trying to line up two images one on top of the other with opacity set so I can see both.in Liquefy (CS4). One is background, the other is Layer 1. How do I move either one roughly in place over the other so I can start adjusting edges so the two profiles match? Hand doesn't move anything.
View 4 Replies View RelatedI try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
When in CS6 I want to be able to move my image where ever I want it, by default it's centered on the workspace. Because my palettes are on the right and I use quit a bit of them it's better when I can move the image moire to the left.
View 7 Replies View RelatedI am using the trial version of CS5 (probably going to upgrade at the end of the trial), and I've only found one thing about it that I don't like more than CS3. This is VERY VERY annoying, and I'm not sure if it's a glitch, or just a preference that needs to be reset:
When using the move tool, I will move something and it will just snap back to where it originally was. When it snaps back, it might move a few pixels over in the direction I was dragging, but it is definitely not moving to where I want it to go. The only way to get things to move the way I want to is by Free Transform...but it's annoying, when you're trying to design a layout, to have to free transform every element you want to move, first.
I'm guessing that this is a glitch because sometimes it happens and sometimes it doesn't...it's pretty random. I've tried turning Snap on and off, and nothing changes.
I have these problems.
1. when I creat a new object he stays at position 0,0,0 and I only can move when I transform in some editable.
2.this happend when I try to construct bones TOO, and I can create whitohou the zeros point, when I click the bones are creating in same point in viewport.
I all ready try to press x, see the snap toogle, dont like to be an Axis constrain, try to restar to default config.
I'm creating a sprite sheet and I need to move my sprites to a specific location.
For example my sprite is 120x120, so I need to place the 5th animated frame at EXACTLY 120x5=600 pixels from zero or at 600, 0. I can't seem to find a way of doing this in GIMP, it shows me a mouse delta position from where I first clicked?
So I have a lot of 2D drawings (a couple thousand roughly) that I need to go through and shift the objects within to the absolute 0,0 position. That way, when we insert them into a new drawing, everything is centered appropriately and not way off the screen.
Instead of:
Open File > Select Objects > "MOVE" > Specify Basepoint > " * 0 , 0 " > Center View on Newly position Objects > Save File > Close File
... Repeat ...
By way of a LISP routine, or a script that could automatically do the above steps on it's own. Even something that doesn't require me to hit *, then tab, then 0, then tab, then 0 again.
Is there a way to change the selection position and size by entering the numbers exactly? I find it difficult to make pixel perfect movements and it is tiresome to use the keyboard arrows to do this.
When something is selected, the position and size appear in the bottom left corner. Perhaps clicking on this could bring up a window that would let the user enter exact values.
With an object selected and the Selection tool active, I press Return to get the Move dialog box.
For some reason, there seem to be random values entered in the Horizontal and Vertical fields. Instead, I just want the boxes to always start at 0 so that I can decide where it moves, instead of having to clear these fields manually.
how to get this box to behave as I want it to?
how can I restore my tool bar in photoshop with the lasso, magnetic, and move tool
View 1 Replies View RelatedWhat is the keyboard shortcut again from the type tool to the move tool?
View 3 Replies View RelatedI hit the zoom tool to zoom in on my document. Say I want to zoom in 5 times. After zooming in once (clicking on the document once), the magnifying glass switches to the move tool cursor If I click again, slowly, it goes back to zooming.
View 3 Replies View RelatedWhen I have a none vector tool active for example the brush tool and I press and hold the Ctrl key down I see the cursor change from the current tool to the move tool cursor. If I presses and hold the Alt key I see the cursor change from the current tool to the eyedropper tool. If I press and hold both the Ctrl+Alt keys a see a cursor icon change to an icon that has two up pointing Arrow heads one Black the other White. What tool is that cursor for? It seems to copy and move the current layer and move its position over the canvas.
View 11 Replies View RelatedI wanted to make a walk cycle animation, How to move a character up and down without affecting the feet position?
View 1 Replies View RelatedI was hoping to create a JS script to move objects away from common center based upon their current position. I was thinking to use a single selected path item as the center based on its position x/y and width/height. Using this reference point the script would then move away all other path items from this center point based on a desired amount and with uniform increments given their current location from this center. I was thinking cos and sin would be my friend in this case, however they seem to have become my foe instead. ;-)
Does this sound doable? What am I missing, doing wrong, misinterpreting? Below is a non-working attempt, I can't seem to sort things out, perhaps I was close and missed it or maybe I am super way off and its more complex than I thought. However at this point I am confused across my various failed attempts this only being one of them.
// Example failed code, nonworking concept
var docID = app.activeDocument;
var s0 = docID.selection[0];
pID = docID.pathItems;
var xn, yn;
var stepNum = 20;
[Code]....
I started learning Photoshop CS4 about a month ago. One of the first things I learned was to add text. Simple, fun. I am now trying to learn about layer masks. One of the exercises in one of my books is to open an image and then add text to it. (The idea is to then add a mask and 'hide' portions of the text behind portions of the image.) A really strange thing is happening when I try to add text. I highlight the image in the layers column. (Prior to adding any mask layers.) I then click the text tool. But when I click on the image (in the area where I want the text), the text tool 'becomes' a move tool. A text layer pops up and the words I'm trying to type on the image come out in the title area for the layer (in the layers column). I've tried everything I can think of to 'get' the text on the image but can't solve it.
View 20 Replies View RelatedI'm having trouble setting up my toolbars. I position them the way I want, but as soon as I switch back from a different workspace (lets say3D modeling) the position of the toolbars change. Also I can't get the scroll bars to disappear for good, they always come back
Here is what I do exactly:
1. Change the content and the position of the toolbars (acad classic workspace)
2. Lock down the toolbars
3. Go to options => profiles, create a new profile (add to list), set current
4. Change workspace to 3D modeling
5. Change workspace back to acad classic
img3.jpgimg4.jpg
The result is: content of the toolbars is the way I want, but the position is changed. The toolbars are locked, so in order to move them to the desired place I have to unlock.
On my tool barin transformation bar i had position - absolute (coordinates) and size of a selected object.
i changed something and now i have position like 0.00 x 0.00 (i think its relative position) and when i write something in position it moves relative to previous.
when i press alt+f7 i can change position relative and absolute but toolbar don't change. How to set toolbar to show me always absolute position?
I'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedRecently upgraded to Gimp 2.8 for the single window mode (which worksbrilliantly in Ubuntu, especially with the HUD).
But the Rectangle Select Tool has a new - but odd - behaviour. When I drawa selection, and then add to that selection, a new "square" is position atmy cursor. (See attached screenshot.) This didn't happen in 2.6 and is abit irritating because it disorientates me slightly, especially if I'mworking quickly.
Is there a way to turn that off (or revert it to the 2.6 way)?
Can the add, delete, convert indicators be moved from the right side of the pen curser to the left of the curser for right handed users? The indicators are obscured by the pen when using the pen in the right hand on the Wacom Cintiq. Option preference for right or left hand is desired.
View 5 Replies View Related