AutoCad :: Move North Arrow Symbol To ArcGIS
Sep 4, 2013After I select the north arrow in my cad drawing what format should I save it as?
View 3 Replies
ADVERTISEMENT
AutoCAD 2013 :: North Arrow Libraries
Apr 2, 2013I am looking for a North Arrows block files that I can choose from. I have been searching in my library (local drive) but I did not get any. Is there any place that I can find them?
View 1 Replies View RelatedAutoCAD Civil 3D :: Can't Load Custom North Arrow
Jul 5, 2013In some templates I can't load a custom North arrow. AutoCAD can't find block.
The built-in north Arrows works fine. In a standard template from Autodesk there is no problem.
Wich settings should I change so I can select a block?
AutoCAD Civil 3D :: Showing North Arrow On Drawing?
May 23, 2012I would like to show a north arrow on my drawing, but i dont know where north is,
Does autocad know where it is, my site is in a very remote mountaineous area with nothing to reference off on goole earth or maps.
AutoCad :: Inserting A Scale Bar Under Compass / North Arrow
Aug 28, 2011I have found 3 installed dynamic scale bars that cad offers that can be inserted onto a map, but i don't like the graphics of the 3 choices.
is there other choices for dynamic scale bars offered somewhere, or do people just build there own?
AutoCAD Civil 3D :: North Arrow For View-port Too Small?
Aug 2, 2013Every time I insert a north arrow it needs to be scaled up afterwards. Normally, scaling up by the same factor as the viewport that I select is about right.
View 5 Replies View RelatedAutoCAD Civil 3D :: North Arrow Alignment With Plan Production
Jan 31, 2011I'm using the Plan Production tools to create alignment drawings and when adding the north arrow during the process i get a error at the end stating @unable to align north arrow?
North arrow is a block and tried with base point and alignment parameters, unless i have missed something in the block creation? How do i create a north arrow block that will align with the layouts in plan production?
AutoCAD Civil 3D :: View Frame North Arrow Alignment?
Dec 20, 2013I'm using C3D 2014.
When I create layouts using the "All layouts in the current drawing" option, the north arrow does not align to the viewport rotation.
But when I use "Number of layouts..." and "All layouts in one..." options, the north arrow block aligns correctly.
AutoCAD Civil 3D :: 2013 Dynamic North Arrow Rotation
Dec 20, 2012I am using the Dynamic North arrow that is linked to the viewport. It doesn't matter if I use an OOTB block or a custom one they all have a rotation of 355.4016.
The viewport is type "Plan", Dview twist is set to "0", USC is World. If I change the rotation on the block it rotates the viewport (as expected). The default block is not rotated.
BTW, It works fin in the default NCS, so it's something in my template.
AutoCad :: North Arrow Dynamic Block Rotate To 4 Positions?
Oct 14, 2011I want my north arrow to come in at 90 (pointing up). Then I want 3 grips that you click to either rotate it to 0,180,or 270.
View 8 Replies View RelatedAutoCad :: North Arrow Rotation In Title Block With Rotation Property Editable In SSM
Jul 27, 2012I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
AutoCAD 2013 :: Any Simple Symbol To Label X / Y / Z Plus Arrow
May 23, 2013I think we keep on without an annotation symbol to label the x,y and/or Z of a point ? Have I to develop our symbol ? I'm going to create my own symbol. Using attributes & dynamic behaviours I can do it.
how to get my arrow rotates (I move the box and I have - the arrow aligned with line1 and line 2 horizontal).I don't want to use parametrics, because I want to have a symbol compatible with versions prior to 2010.
Revit :: Determining Angle From Project North To True North?
Apr 23, 2013I have a text file of several surveyed ponts throughout my model. I can select one of these points in my model and specify the coordinates of East/West, North/South, and elevation from this file, but how do I determine the angle from project north to true north from these surveyed points?
View 1 Replies View RelatedPhotoshop :: Arrow Keys Create Symbol Characters In...
Sep 30, 2008I'm running a legit version of Photoshop CS2 on Windows XP. I've had a number of basic functions not work ever since I first installed, such as the Ctrl +/- not working, the [ and ] brush size adjustment funtion not working, the nudge facility of the arrow keys in Move Tool mode not working, and in Text Tool mode, the arrow keys do not move the cursor, but instead create spurious charachters like &'%# etc.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Move Window Around With Arrow Keys
Aug 22, 2013how to move the window around with the arrow keys and I just can't find it. A little box popped up in the upper left hand corner that allowed you to move the drawing window around to find a hidden dialog box.
In 2013 Civil 3d I am having the issue that when I select the Add/ Delete scales the cursor changes to an arrow and the program waits. If i hit the exscape key it goes back to normal. My best guess is the dialog box is popping up behind the drafting window.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD 2010 :: Move Arrow Tip Of Annotative Leaders
Nov 26, 2013Is there a way to move the tip of the other scale's arrow of an annotative multileader in the model space ?
For exemple, I shifted this tree a little bit to the left. I have a multileader pointing to the middle of it to indicate the tree species. When selecting the multileader, I can use the little blue square to move the tip of the small arrow but how can I move the other one ?
Since that multileader is pointing to other trees as well, I cannot move the whole thing.
I guess I could go to the paper space and into a viewport using that scale, but I need to do that quite often and I'm sure there should be an easier way.
AutoCAD Inventor :: MOVE A Sketched Symbol?
Mar 22, 2012I have a symbol that gets placed in a certian location on a sheet. If the sheet changes size i would like the symbol to relocate itself. Usually i could just find it, delete it and replace it but this one is different. It has 16 prompted entries that may have been populated by the user.
Easy option=Be able to move the symbol.
Difficult option=Load 16 prompted entries into the a dynamic array and replace save the symbol in the new location.
I did some reading on attributes, would adding an attribute to the sheet location allow the symbol to move with it.
Inventor 2010
3ds Max Animation :: Move Green Dummy In Direction Of White Arrow?
Feb 28, 2014i'm trying to move the green dummy in the direction of the white arrow I use wire parameter from the Boom Helper, so when i rotate the boom helper i want the weights to move on the local x axes of the dummy but it only moves in the worlds x axes (black arrow)
View 8 Replies View RelatedIllustrator :: Hand Symbol To Move Page Around - How To Deselect
Jun 16, 2013The "hand symbol" that you can move the page around, how do I deselect it? I tried to select any other tool from the boxes to the left but when I move back the cursor over the page the hand symbol is still there and the only thing I am able to do is to move the page around......
View 1 Replies View RelatedEdge Animate CC :: On Mouseover Move Symbol To Left And Right?
Aug 18, 2013I'm trying to build a small photo gallery within Edge Animate. I have a symbol which is essentially 10 images or so side by side, and buttons below that are directional arrows left and right. I want to have it set up where when you hover over one of those buttons, it moves the photo slideshow left and right. I havent been able to find the correct code and it is currently inoperable.
Right now, I have this in the BtnRight symbol, which is the arrow to move the slideshow to the right.
sym.$('PhotoTimeline').animate({
left: "+=30px",
}, 20 );
}, 2000);
It doesn't work however. Any simple code that I can input into the syntax of the arrow symbols to allow my photo gallery to slide left and right on mouse over?
AutoCAD 2013 :: Why Doesn't Arrow Leader Disappear When Flip Arrow Direction To Inside
Dec 11, 2012why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
Revit :: Object Move Symbol Location For Text Item
Jan 28, 2013What governs the location/distance from the object of the "object move symbol" when an item is selected? See attached image. I have selected the blue view reference text but the four way arrow/move symbol is way below it. This isn't using the move command. The arrows can be hard to find in a crowded sheet if it's very far from the item selected.
For reference I have added an image showing the location of the object move symbol for a text item. It's in the upper left corner of the text outline.
AutoCAD Civil 3D :: Using Objects In ArcGIS 9.3?
Apr 11, 2012Any reliable process to use data from Civil 3D objects in ArcGIS 9.3? AutoDesk is not my real strength (ESRI ArcGIS is), so I'm trying to learn what the best possible workflow is from AutoDesk Civil 3D users. We've used one solution using Safe Software's FME, but am looking for something that's a little more 'direct' from AutoDesk or ESRI (i.e.: no third-party software/data formats, if possible; read data directly from the source instead of interim processing steps with interim files to create/manage/track, if possible)
View 4 Replies View RelatedAutoCad :: How To Import Data From ArcGIS
Jan 6, 2012I want to create a site layout that would consist of multiple buildings. I have the AutoCAD drawing of each building and the location and orentation of each building in ArcGIS. Is there a way to import the data from ArcGIS into AutoCAD for my use?
Also if this isnt the correct location for this could administrator move it for me?
AutoCAD Map 3D :: Importing ARCGIS SHP File
Jan 18, 2013I was furnished with a .shp file (and a number of associated files (5 total I think) that I can't remember-not in office now). The file is supposed to be a pipeline alignment in Pennsylvania South NAD83, the data imports the polyline with correct dimensions but the coordinates end up being about N-14,613,757 E-1,984,420 and should be about N-334,435 E-1,413,375.
As an aside, we are using Carlson Civil Suite in MAP. My intuition is telling me the problem has to do with setting up the initial geographic system in a new drawing. I am going to try the import with plain MAP.
AutoCAD Map 3D :: Arcgis 10.2 Does Not Recognize Projection From 2013?
Aug 30, 2013We use Acad map 3d 2012 & civil 3d 2012. We also use Arcgis10.2 and have not seen this problem until one of our contractors (using map 3d 2013) sent us his drawings. When we bring in the map 2013 drawing Arcgis does not recognize the projection assigned to the drawing and our data ends up thousands of kilometres off in the distance. Am I missing something...it always works fine for 2012 drawings.
View 2 Replies View RelatedAutoCAD 2013 :: Adding Dwg Files Into ArcGIS
Aug 14, 2013It used to be easy to add dwg files into ArcGIS when i used AutoCad 2012. Now that i am using AutoCad 2014 my dwg files dont display in my ArcGIS. How can i get the dwg files to display?
View 6 Replies View RelatedAutoCAD Map 3D :: Edge Colors Are Able To Import In ArcGIS
Jun 30, 2011i want to export DGW-data (or in general AutoCAD-data) from AutoCAD Map 3d 2011 and import them into ArcGIS 10.As I suppose, ArcGIS could recognize only DWG or shp.
The most important information for me are the styles (color, linetype ....). The feature class Line is not the main problem, but when i want to export points or polygons it is difficult. AutoCAD seperate points or polygons in fill colors und edge colors and only the edge color are able to import in ArcGIS. Another fact is that ArcGIS seperate a Point into featureclass Line (the edge) und Polygon and the spatial information failes (that works with ArcToolbox feature "CAD to Geodatabase", all not my problem )
To summarize there are any problems with the transformation of styes.
Wenn I export SDF-layer as Shapefile its a good way to transform spatial information (coordinate system) und the data of attributtables, but my problem are the colors und styles.
how i can transport all (point, line, polygon) styles from AutoCAD Map 3D 2011 to ArcGIS 2011?
AutoCAD Civil 3D :: Exporting DTM (TIN) To ASCII Gid Format (ESRI - ArcGIS)
Nov 8, 2012Is it possible to export a DTM (TIN surface) to ESRI's ASCII grid format (for ArcGIS)?
I've attached an example file.
Failing that, is it possible to export to a simple XYZ point file?
AutoCAD Inventor :: Numbers Are Added To Symbol When Using Symbol In Lieu Of Balloon
Mar 1, 2013The attached picture is me trying to balloon a part. I would like to just add some notes to the balloon so that I can update them manually but all I can find is to have a symbol. So I created a symbol, the insertion point for the symbol is shown. For some reason I get an extra number and the symbol offcenter. Why is this happening? What I'm really looking for is a balloon that is fully customizable so that I can just add text to the top and bottom and fill out the details.
View 5 Replies View RelatedIllustrator :: Linear Conversion From ArcGIS To AI
Jan 6, 2014I compile all of my data in Arc and get my data referenced and looking good. Once all of the data I need is in place and ready to be exported, I export the map out to an AI file. This has worked fine and still does. I am new to AI and have great Arc Knowledge. Here's where my issue begins:
- Once I bring in the map to AI, the roads look horrible and nothing like they did in Arc. I exported it at the small scale (county) and the linework looks horrible. Roads that were straight in Arc are all zig-zagged and did not convert over smoothly. This would not be an issue if there were only a couple of them, However, I am dealing with thousands of unsmoothed roads. The smooth tool works, however, one line at a time and then it leaves loose connections. So this tool is not really an option for me.
- My next attempt at smoothing out the lines in the masses, was to select the area in question, then Object>Simplify>Smooth. This works on some, but did not produce the output I was looking for. It smoothed out all of the selected roads, but instead of keeping them all together and just smoothing out, It moved some of the longer roads and long story short, the roads became inaccurate and did not shown what was really on the earths surface.
- is the scale of exporting out of Arc. At the small Scale, the map is rough, nasty and needs some smoothing. However, when exporting on the larger scale, the roads turn out fine, just as they are displayed in Arc. I have been messing around with this idea since it produces the output I am looking for, however, scales and whatnot are all out of wack creating more than wanting distortion as well as gridding out my map to export, then reassembling it. I could do that, but this map will need to be accurate and an error in this that could mess up the coordinate system.
There are multiple ways to smooth out data in Arc, however, the data looks fine in arc, it only has conversion errors when brought into AI.
Experienced this error with linears and scales? I am going to locate a new road shapefile and see if it will come out better in AI, but if there is a workaround.I have tried other files that I have, and some are better than others, however, all have large areas that will need to be smoothed.