In some templates I can't load a custom North arrow. AutoCAD can't find block.
The built-in north Arrows works fine. In a standard template from Autodesk there is no problem.
Wich settings should I change so I can select a block?
I would like to show a north arrow on my drawing, but i dont know where north is,
Does autocad know where it is, my site is in a very remote mountaineous area with nothing to reference off on goole earth or maps.
Every time I insert a north arrow it needs to be scaled up afterwards. Normally, scaling up by the same factor as the viewport that I select is about right.
View 5 Replies View RelatedI'm using the Plan Production tools to create alignment drawings and when adding the north arrow during the process i get a error at the end stating @unable to align north arrow?
North arrow is a block and tried with base point and alignment parameters, unless i have missed something in the block creation? How do i create a north arrow block that will align with the layouts in plan production?
I'm using C3D 2014.
When I create layouts using the "All layouts in the current drawing" option, the north arrow does not align to the viewport rotation.
But when I use "Number of layouts..." and "All layouts in one..." options, the north arrow block aligns correctly.
I am using the Dynamic North arrow that is linked to the viewport. It doesn't matter if I use an OOTB block or a custom one they all have a rotation of 355.4016.
The viewport is type "Plan", Dview twist is set to "0", USC is World. If I change the rotation on the block it rotates the viewport (as expected). The default block is not rotated.
BTW, It works fin in the default NCS, so it's something in my template.
I am looking for a North Arrows block files that I can choose from. I have been searching in my library (local drive) but I did not get any. Is there any place that I can find them?
View 1 Replies View RelatedAfter I select the north arrow in my cad drawing what format should I save it as?
View 3 Replies View RelatedI have found 3 installed dynamic scale bars that cad offers that can be inserted onto a map, but i don't like the graphics of the 3 choices.
is there other choices for dynamic scale bars offered somewhere, or do people just build there own?
I want my north arrow to come in at 90 (pointing up). Then I want 3 grips that you click to either rotate it to 0,180,or 270.
View 8 Replies View RelatedI am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
I have a text file of several surveyed ponts throughout my model. I can select one of these points in my model and specify the coordinates of East/West, North/South, and elevation from this file, but how do I determine the angle from project north to true north from these surveyed points?
View 1 Replies View RelatedHow to get my invert labels to reference construction north rather than actual (surveyed) north?
C3D 2012, SP1
Win7-64 bit
Is it possible to create your own custom arrow head for use with leaders, balloons, dims etc?
View 3 Replies View RelatedIn the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies View RelatedHow come when I click on the custom shape tool, then add say, an arrow, that arrow is not editable? I can't click on it or rotate it etc.
View 3 Replies View RelatedHow to create custom shortcut arrow for icons the default shortcut arrows in windows vista are huge you can use the program Ultimate Windows Tweaker UWT v2.2 (to clear off the shortcut arrow completely) or Vista Shortcut Manager to give a beautiful blue arrow
I am going to show you how to do it with xara
1. make a 256 x 256 pixels (px) square (very thin line 0.5 px , no fill)
2. draw an arrow inside in the left down corner
3. give it a drop shadow if needed
4. export as png
5. use program Iconfx
[URL]....
or
[URL]....
6. open the png in iconfx (drag and drop)
7. a "new image dialog box will open" click ok
8. advanced import dialog box: click ok
9. untitled with the png image in 48 x 48
10. now click the windows icon in the toolbar, that will make the icon
11. save the icon in a folder - give the name empty.ico
12. go to C:WindowsSystem32
paste and replace the the empty.ico which is in that folder (if you want backup the original one rename it to emptyoriginal.ico then restart explorer
this empty.ico is an overlay above any shortcuts for applications, files etc.
Now you will be able to see the custom made shortcut arrow over any shortcuts
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I have created a custom office standards tool palette for the users, and it is properly loaded on all the machines. The issue is that when the 'Tools' button on the ribbon is pressed, it loads to the 'design tools' palette by default. Most user here have the habit of closing the tool menu after use, and reopening it from the menu - which defaults back to the design tools palette instead of the office standards... which is frustrating when jumping back and forth constantly. I assumed there was an easy way to tell them to set the 'standards' as the default, but I can't seem to find this property anywhere.
View 0 Replies View RelatedI am trying to create a custom palette that will load whenever Autocad loads. The code below works with one exception.
<CommandMethod("gtPalette")> _ Public Sub DoIt() If m_ps = Nothing Then Dim MYGuid As Guid = New Guid("{4AECF36F-C7E9-4C59-B72B-36A98DDA1D24}") m_ps = New Autodesk.AutoCAD.Windows.PaletteSet("gtPalette", MYGuid) myCoordPalette = New UserControl1() m_ps.Add("Coordinate List", myCoordPalette) End If m_ps.Visible = True End Sub
The problem is that my Palette title is now "gtPalette" which I do not want. However if I change
PaletteSet("gtPalette", MYGuid)
to
PaletteSet("GunTech Cogo", MYGuid)
Then what occurs is that when Acad (actually I'm using Civil 3D 2012) start it trys to execute a command called 'GunTech' and then one called "cogo'. Cogo being a valid Civil 3d Command brings up the Cogo dialog. If I then type the command gtPalette it appears in the correct location.
Currently on my development PC the first code works perfect and brings up a palette that even has the correct title of "GunTech Cogo". this info has presumable been saved with the GUID in my previous attempts to get the code to work.
When I try and load my cui file, my custom toolbars and settings do not show up?
View 9 Replies View Relatedwhy doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
i am trying to edit the arrow? When i click on it, it shows as a solid under properties. I need to resize that arrow, Just dunno how to do it?
View 9 Replies View Relatedhow to load custom photoshop cs5 layer styles to photoshop cs6 ?
View 3 Replies View RelatedI have googled this found some posts about putting it under the Users folder. However I don't have a library under my username it comes under a folder called Shared.I'm using a Mac computer
I placed my custom profiles in there , however it still won't work.
I'm using both Lightroom 3.5 and Photoshop CS5 on a 64-bit Windowx XP-Pro system with 8GB of RAM and plenty of disk space.
I use an X-rite color checker to generate custom camera profiles whenever I do portraits or other color critical photo sessions. The camera profile is generally placed in the "Documents and Settings...{user...}Application DataAdobeCameraRawCameraProfiles " folder.
When I try to apply a profile in either lightroom or ACR the newely created profile is not visible in the camera profile drop-down box. When I check to see if the profile exists in the appropriate folder, it does.
I've used color profiles before and have always been able to create and select a profile. Now I'm no longer able to do this. I would prefer to not re-install all my Adobe software since then I'd have to reinstall all the updates and plug-ins.
How can I get lightroom and ACR to see these profiles and use them?
how to move the window around with the arrow keys and I just can't find it. A little box popped up in the upper left hand corner that allowed you to move the drawing window around to find a hidden dialog box.
In 2013 Civil 3d I am having the issue that when I select the Add/ Delete scales the cursor changes to an arrow and the program waits. If i hit the exscape key it goes back to normal. My best guess is the dialog box is popping up behind the drafting window.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Well I created this dynamic block, and within the block is a pull-down to change the style of arrow from a custom version to spline or straight. Everthing works fine and look great in the drawing. But when I use the the Spline arrow it will show up correct graphically but will plot as two straight lines with an arrow which totally defeats the purpose. I have attached the block here. I checked this on C3D11 and LDD08 and they both have the same issue so it's more than likely an ACAD thing.
C3D12-13
Win7x64 6gb
issue that when the xref a drawing with Surface Slope Arrows, that the style changes in the child drawing compared to the parent?
I am hoping to use the standard I am used to of the arrow pointing down the hill (towards the -10ft) rather than what the child file is showing of uphill (away from the -10ft).
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
Yesterday I was working with a collection of photos, and saved my Smart Sharpen settings. As I moved from one photo to another, I was able to choose my saved settings in the dropdown menu. Today, however, all that is available is "default" -- how can I load yesterday's saved settings?
View 5 Replies View RelatedHow to load a custom menu setup on mac? At the command line , where is the command line location on mac?
View 7 Replies View Related
