AutoCAD Civil 3D :: North Arrow For View-port Too Small?
Aug 2, 2013Every time I insert a north arrow it needs to be scaled up afterwards. Normally, scaling up by the same factor as the viewport that I select is about right.
View 5 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: View Frame North Arrow Alignment?
Dec 20, 2013I'm using C3D 2014.
When I create layouts using the "All layouts in the current drawing" option, the north arrow does not align to the viewport rotation.
But when I use "Number of layouts..." and "All layouts in one..." options, the north arrow block aligns correctly.
AutoCAD Civil 3D :: Can't Load Custom North Arrow
Jul 5, 2013In some templates I can't load a custom North arrow. AutoCAD can't find block.
The built-in north Arrows works fine. In a standard template from Autodesk there is no problem.
Wich settings should I change so I can select a block?
AutoCAD Civil 3D :: Showing North Arrow On Drawing?
May 23, 2012I would like to show a north arrow on my drawing, but i dont know where north is,
Does autocad know where it is, my site is in a very remote mountaineous area with nothing to reference off on goole earth or maps.
AutoCAD Civil 3D :: North Arrow Alignment With Plan Production
Jan 31, 2011I'm using the Plan Production tools to create alignment drawings and when adding the north arrow during the process i get a error at the end stating @unable to align north arrow?
North arrow is a block and tried with base point and alignment parameters, unless i have missed something in the block creation? How do i create a north arrow block that will align with the layouts in plan production?
AutoCAD Civil 3D :: 2013 Dynamic North Arrow Rotation
Dec 20, 2012I am using the Dynamic North arrow that is linked to the viewport. It doesn't matter if I use an OOTB block or a custom one they all have a rotation of 355.4016.
The viewport is type "Plan", Dview twist is set to "0", USC is World. If I change the rotation on the block it rotates the viewport (as expected). The default block is not rotated.
BTW, It works fin in the default NCS, so it's something in my template.
AutoCAD Civil 3D :: Get View Cube To Stay Pointed To The North
Nov 5, 2012In the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies View RelatedAutoCAD Civil 3D :: View Port Scale Setting
Sep 25, 2013How to set the view port scale setting in autocad civil 3d i need to print using plan production template.
View 1 Replies View RelatedAutoCAD Civil 3D :: View Port Line Type?
Sep 20, 2011drawing a view port with Polygonal option. When completed it defaults to Dash dot line type which can not be changed in the properties dialog. Civil 3D 2012
View 4 Replies View RelatedAutoCAD Civil 3D :: View Port Layers Not Showing
Aug 17, 2012I have two view ports on one sheet and the top one has layers not showing that the bottom one has. I can erase and make a new VP and the layers are on.
View 4 Replies View RelatedAutoCAD 2013 :: North Arrow Libraries
Apr 2, 2013I am looking for a North Arrows block files that I can choose from. I have been searching in my library (local drive) but I did not get any. Is there any place that I can find them?
View 1 Replies View RelatedAutoCAD Civil 3D :: Layer Filter For Different View Port Colors
Mar 1, 2013In my template, is there a way to setup a layer filter or layer state to automatically plot a different viewport color when a new drawing is created and viewports are made? Note, my template does not have viewports premade.
I've set all my Existing and Proposed Utilities to use the WV Miss Utility colors, but I designated either pale (odd color#) for existing and bold (even color#) for proposed so that in model space there's a visual difference. See a few examples below:
V-SSWR-PIPE (color 91)
V-WATR-PIPE (color 151)
C-SSWR-PIPE (color 92)
C-WATR-PIPE (color 152)
Our Civil dept doesn't use colors, but our Utility dept does occasionally especially when Aerials are used.
When we create layouts/viewports in a drawing, it would be nice to have viewport layer colors automatically be set to plot black or gray or be on/off depending on existing conditions sheet or proposed site plan sheet. The only way I know of is if I would set up viewports inside my template with VP Color Overrides preset and/or VP freezes for certain layers, which I'm hesitant in doing.
AutoCad :: Move North Arrow Symbol To ArcGIS
Sep 4, 2013After I select the north arrow in my cad drawing what format should I save it as?
View 3 Replies View RelatedAutoCad :: Inserting A Scale Bar Under Compass / North Arrow
Aug 28, 2011I have found 3 installed dynamic scale bars that cad offers that can be inserted onto a map, but i don't like the graphics of the 3 choices.
is there other choices for dynamic scale bars offered somewhere, or do people just build there own?
AutoCAD Civil 3D :: Setting Scale In View Port In Paper Space?
Aug 15, 2012Setting the scale in a view port in paper space? 2010
View 3 Replies View RelatedAutoCad :: North Arrow Dynamic Block Rotate To 4 Positions?
Oct 14, 2011I want my north arrow to come in at 90 (pointing up). Then I want 3 grips that you click to either rotate it to 0,180,or 270.
View 8 Replies View RelatedAutoCad :: How View Port Linked To Sheet View
Jun 23, 2013In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies View RelatedAutoCad :: North Arrow Rotation In Title Block With Rotation Property Editable In SSM
Jul 27, 2012I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
AutoCAD Map 3D :: Creating Map Book Where North Is Rotated In View
Jan 4, 2008I'm having trouble creating a map book where north is rotated in the view. I've tried using ucsfollow, and the ucs command to rotate the map correctly, but when I try to create the map book the map doesn't show up in the main viewport.
How to rotate the map when creating a map book?
AutoCAD LT :: Layers In View Port Will Not Freeze
Aug 25, 2013I'm on my paper space layout tab, I double click inside the viewport so I'm in model space, I open the layer properties with the full drop down menu and click on the far right column with the snowflake icon which is suppose to freeze the layer for that particular view port. It does not freeze the layer. I'm starting to wonder if it is something with the program.
View 5 Replies View RelatedAutoCAD 2010 :: View Port Setting For 3D
Aug 3, 2012I have a 3d object located in model space and have opened up a view port in paper space to view the object. Now I have set up everything as I want this includes several other view ports not showing the 3d object. my problem is that I can use the hide command in the view port containing the 3d object and get the image I want. However switching tabs or doing just about anything causes the 3d object in the view port to revert back to wire frame. Is there a way to lock just the one view port with hide mode on without effecting the rest of the view ports?
View 2 Replies View RelatedAutoCAD 2010 :: Text In View Port
Apr 10, 2013My drawing looks weired. Some texts in model space I can see, but in paper space can not see them. I checke layer and elevation level..., but just couldn't find out. I set different UCS and views in this drawing.
View 3 Replies View RelatedAutoCAD 2010 :: View Port Settings
Oct 27, 2013We have a drawing with multiple viewports, in paper space, When click on viewport no 2 the viewport no1 settings disappear before locking the viewport.
View 4 Replies View RelatedAutoCAD 2013 :: View Port Display
Jan 29, 2013I have a need to find the solution for a viewport issue. Model space, create view, when selected goes to correct view size. When placing same view in layout on paper space the graphics to be viewed are too small & do not fill the paper space viewport.
View 1 Replies View RelatedAutoCad 2D :: View Port Use Model Space?
Apr 7, 2012a Villa Drawing I want give a Bath room Detail, so i want off this villa drawing with out bath room. if i have any modification in this bath room automatically changed the bath room detail drawing in model space not for layout using view port... ,if anypossible in model space, what i choose the part only shown ..
View 3 Replies View RelatedAutoCAD 2010 :: Stuck In A View Port?
Apr 24, 2012When I am in paper space I sometimes double click in my viewport. Then the viewport becomes my whole window. How do I get out of the viewport without doing an undo until I reach where I first began?
Also sometimes when I double click in the viewport, but the viewport is the only thing visible in the screen, (vs having the whole sheet and being able to click out) I don't know how to get out without Undo.
AutoCad 2D :: Plotting / View Port Scale?
Aug 9, 2011My drawing inb model space looks fine, however when I try to set it up to plot in paper space, via the properties box with the "correct scale factor" and the drawing becomes very large. The only scale I can get the drawing to plot at is "fit to page", which is no scale. I have tried to set the scale on the "page setup" and the same thing happens.
View 5 Replies View RelatedAutoCAD LT :: Get Annotative Dimensions In View Port
Dec 8, 2011How can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies View RelatedAutoCad :: View Port Scale Control?
Aug 4, 2011I have been using AutoCad for 2009 and had it all set perfect. Just had a computer melt down and trying to establish everything back how I had it all before.
One little tool that was very useful was a drop down box called, VIEWPORT SCALE CONTROL. I had all my scales in there and used to just click the border in paperspace, click the scale from the drop down box and set your scale. How to get this back.
AutoCad :: Setting View Port Scale
Apr 18, 2012When setting the viewport scale how do I know if I'm scaling to an A3 plot or A1 etc.
View 9 Replies View RelatedAutoCAD LT :: Paper Space View Port Scale
Mar 2, 2012I have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
View 3 Replies View Related
