AutoCAD Civil 3D :: View Port Layers Not Showing
Aug 17, 2012I have two view ports on one sheet and the top one has layers not showing that the bottom one has. I can erase and make a new VP and the layers are on.
View 4 Replies
ADVERTISEMENT
AutoCAD LT :: Layers In View Port Will Not Freeze
Aug 25, 2013I'm on my paper space layout tab, I double click inside the viewport so I'm in model space, I open the layer properties with the full drop down menu and click on the far right column with the snowflake icon which is suppose to freeze the layer for that particular view port. It does not freeze the layer. I'm starting to wonder if it is something with the program.
View 5 Replies View RelatedAutoCAD Civil 3D :: View Port Scale Setting
Sep 25, 2013How to set the view port scale setting in autocad civil 3d i need to print using plan production template.
View 1 Replies View RelatedAutoCAD Civil 3D :: View Port Line Type?
Sep 20, 2011drawing a view port with Polygonal option. When completed it defaults to Dash dot line type which can not be changed in the properties dialog. Civil 3D 2012
View 4 Replies View RelatedAutoCAD Civil 3D :: North Arrow For View-port Too Small?
Aug 2, 2013Every time I insert a north arrow it needs to be scaled up afterwards. Normally, scaling up by the same factor as the viewport that I select is about right.
View 5 Replies View RelatedAutoCAD Civil 3D :: Layer Filter For Different View Port Colors
Mar 1, 2013In my template, is there a way to setup a layer filter or layer state to automatically plot a different viewport color when a new drawing is created and viewports are made? Note, my template does not have viewports premade.
I've set all my Existing and Proposed Utilities to use the WV Miss Utility colors, but I designated either pale (odd color#) for existing and bold (even color#) for proposed so that in model space there's a visual difference. See a few examples below:
V-SSWR-PIPE (color 91)
V-WATR-PIPE (color 151)
C-SSWR-PIPE (color 92)
C-WATR-PIPE (color 152)
Our Civil dept doesn't use colors, but our Utility dept does occasionally especially when Aerials are used.
When we create layouts/viewports in a drawing, it would be nice to have viewport layer colors automatically be set to plot black or gray or be on/off depending on existing conditions sheet or proposed site plan sheet. The only way I know of is if I would set up viewports inside my template with VP Color Overrides preset and/or VP freezes for certain layers, which I'm hesitant in doing.
AutoCAD Civil 3D :: Setting Scale In View Port In Paper Space?
Aug 15, 2012Setting the scale in a view port in paper space? 2010
View 3 Replies View RelatedAutoCad :: How View Port Linked To Sheet View
Jun 23, 2013In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies View RelatedAutoCAD 2010 :: View Port Setting For 3D
Aug 3, 2012I have a 3d object located in model space and have opened up a view port in paper space to view the object. Now I have set up everything as I want this includes several other view ports not showing the 3d object. my problem is that I can use the hide command in the view port containing the 3d object and get the image I want. However switching tabs or doing just about anything causes the 3d object in the view port to revert back to wire frame. Is there a way to lock just the one view port with hide mode on without effecting the rest of the view ports?
View 2 Replies View RelatedAutoCAD 2010 :: Text In View Port
Apr 10, 2013My drawing looks weired. Some texts in model space I can see, but in paper space can not see them. I checke layer and elevation level..., but just couldn't find out. I set different UCS and views in this drawing.
View 3 Replies View RelatedAutoCAD 2010 :: View Port Settings
Oct 27, 2013We have a drawing with multiple viewports, in paper space, When click on viewport no 2 the viewport no1 settings disappear before locking the viewport.
View 4 Replies View RelatedAutoCAD 2013 :: View Port Display
Jan 29, 2013I have a need to find the solution for a viewport issue. Model space, create view, when selected goes to correct view size. When placing same view in layout on paper space the graphics to be viewed are too small & do not fill the paper space viewport.
View 1 Replies View RelatedAutoCad 2D :: View Port Use Model Space?
Apr 7, 2012a Villa Drawing I want give a Bath room Detail, so i want off this villa drawing with out bath room. if i have any modification in this bath room automatically changed the bath room detail drawing in model space not for layout using view port... ,if anypossible in model space, what i choose the part only shown ..
View 3 Replies View RelatedAutoCAD 2010 :: Stuck In A View Port?
Apr 24, 2012When I am in paper space I sometimes double click in my viewport. Then the viewport becomes my whole window. How do I get out of the viewport without doing an undo until I reach where I first began?
Also sometimes when I double click in the viewport, but the viewport is the only thing visible in the screen, (vs having the whole sheet and being able to click out) I don't know how to get out without Undo.
AutoCad 2D :: Plotting / View Port Scale?
Aug 9, 2011My drawing inb model space looks fine, however when I try to set it up to plot in paper space, via the properties box with the "correct scale factor" and the drawing becomes very large. The only scale I can get the drawing to plot at is "fit to page", which is no scale. I have tried to set the scale on the "page setup" and the same thing happens.
View 5 Replies View RelatedAutoCAD LT :: Get Annotative Dimensions In View Port
Dec 8, 2011How can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies View RelatedAutoCad :: View Port Scale Control?
Aug 4, 2011I have been using AutoCad for 2009 and had it all set perfect. Just had a computer melt down and trying to establish everything back how I had it all before.
One little tool that was very useful was a drop down box called, VIEWPORT SCALE CONTROL. I had all my scales in there and used to just click the border in paperspace, click the scale from the drop down box and set your scale. How to get this back.
AutoCad :: Setting View Port Scale
Apr 18, 2012When setting the viewport scale how do I know if I'm scaling to an A3 plot or A1 etc.
View 9 Replies View RelatedAutoCAD Civil 3D :: Layer Manager Not Showing Layers
Jan 26, 2012When I open layer manager, it doesnt show my layers, it is just all blank, not even a "0" layer. I can click in the area and it shows the layer but that is it. I searched for a fix but was unable to find a fix. I have updated my graphics card driver but that didnt fix it. I have attached a screen shot to show what it looks like. I am running C3D 2009.
View 9 Replies View RelatedAutoCAD Civil 3D :: Showing Super Elevation In Profile View
Jun 1, 2012We don not show CL profiles and only show the gutters on the CL profile view. We also do not used profile bands.
I need to show Superelevation on both left and right profiles complete with labeling.
Short of creating a seperate alignment for each, sampling the corridor surface, superimposing it onto the CL profile view and then creating a layout profile by drawing over the sampled surface.
AutoCAD LT :: Paper Space View Port Scale
Mar 2, 2012I have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
View 3 Replies View RelatedAutoCAD 2013 :: Edit View Port Boundary
Jul 11, 2012How to edit the boundary of a view port Insert a segment or delete one. If I remember this was available in PEDIT but now I can not able to do it.
View 1 Replies View RelatedAutoCAD 2013 :: View Port Menu Not Available On Navigation Bar
Nov 14, 2012I'm new to AutoCAD 2013 and I am unable to create new viewports from the "layout" or "paperspace" tabs. The "Model Viewports" are on the navigation bar (the one at the top) but are grayed out and thus unusable and the typical "Viewports" menu from my AutoCAD 2011 (last version I had/used) is not there. I can open the viewports menu from toolbars but am unable to dock it into the navigation bar.
View 9 Replies View RelatedAutoCAD 2013 :: View Port Frame Won't Hide
May 15, 2012I have a drawing with multiple view ports and multiple raster images
I can shut the image frames off with "Imageframe" )(tframes) this works fine But it does not turn off the viewport frames.
I've tried putting the viewport on it's own layer and freezing the layer. This looks OK on the screen, the frames are gone. But the plot preview shows there are no images showing in any viewport.
How can I just turn off the viewport frames so when plotting I can see what's in the viewport.
AutoCad :: View Port Freeze In Paper Space?
Sep 29, 2011We have a problem with the view port freeze. When we feeze a layer in the modelspace of a viewport and save the drawing, on re-opening the drawing we find that the layer that was switched off has been switched back on i.e. the saved mechanism does not work.
We have tried copying a view port that works from another drawing into this drawing by that did not work. We have also compared setttings with the drawing that works and the drawing that does not work. But there was no joy.
We think the problem is with the drawing and need a solution preferably with the settings of the drawing. having to redrawing the whole drawing.
AutoCAD Inventor :: Adjusting View Port Margin?
Mar 14, 2012I know I can adjust the view port margin to increase the view clip to show more reference geometry.
But from what I see, if the drawing is a projected view and I set the margin, it changes the margin for ALL the associated views.
This is not a base view or a view that has other views projected off of it, it is a view projected from a base view.
Changing the margin for this view, changes the margin for the base view as well.
Is there a way to change the margin on just the view you want without having to re-create it as a stand alone view?
AutoCad 2D :: Architectural Drawing - View Port Scale
Mar 21, 2012I am working on an architectural drawing and for some reason when I try to "objectscale" the annotation to the same scale as the view port I am using, it doesn't appear or if it does it is a lot smaller scale than I requested.
View 4 Replies View RelatedAutoCad 2D :: Change Line Weight At View Port?
May 20, 2013I created a xref. this xref included some poly line. width is 0.2mm. i need this poly line line weight should be change from different view port. right now this is shown in narrow line width. how can change this line weight at view port?
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Structure Not Showing Up In Plan View
Feb 29, 2012I have 7 manholes in my network, only 3 of them are visibile in the model tab though.
There is structure label on all of the manholes
I can use select similar to mark them and i get "Structure (7)".
I can even see them in the object viewer.
AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit
AutoCAD Civil 3D :: Created Corridors - Assembly Keeps Showing Up In View Sections
Jun 14, 2012I have created several different corridors (with different assemblies in them), but when I to to view sections the same assembly keeps showing up. How do the sections get updated with the new assemblies?
View 4 Replies View RelatedAutoCAD 2013 :: Centering Drawing (view Port) In Layout
Mar 28, 2013Centering the drawing (or viewport) in the lay out, I’m not sure about the best practice to center my drawing in the lay out so that it will be centered as it sis printed from the lay out
This issue is already discussed in the link below
[URL].......
The size of the A4 is 29.7x21The size of by title block is 27x19Then I have like 1 cm margin from top, 1cm and bottom, 1.35 cm from left and 1.35 from rightI managed to have the view port / drawing centered on the A4 layout by setting the “plot offset” to be: X=13.5 and Y=10 using the printer “dwg to pdf.pc3”
It looks fine in the printed pdf, but when it is printed using printer “HP LaserJet P2050 Series PCL6”, the drawing is not centered on the hard copy A4 paper (attached)
What might be the issue here? Is the approach that I used to center the drawing in the layout is efficient? Why the drawing is centered correctly on the pdf but incorrectly centered in the printed A4 paper?