I downloaded a free PDF to DWG converter and converted a land survey PDF to DWG, subsequently i imported the file to ACAD 2006 LT.
I would like to be able to dimension the drawing using the dimensions from the PDF, this would require some form of rescaling.
I've attached the file, you can see the line i've dimensioned is 80,6 units whereas the drawing is detailed 312.63 feet - how do i make them match?
I've enlarged a component by dragging the mouse to the desired size (by visual inspection). I have a second (similar) component I'd like to scale to be the exact same size, but I'm not sure of the easiest way to do it. I'm thinking there must be a way to reference the scale of the first component to match its scale with the second component.
View 6 Replies View RelatedI am having a problem with AutoCad Architecture 2014 on my Mac Pro running Parallels and Windows XP.
The crosshair, grid lines,and actual drawing do not show up on my work space, either Model or Paper. When I installed the software two days ago, the software was working properly. I could see what I was supposed to on the drawing space. Something happened that has caused those items to disappear. I have uninstalled and reinstalled the software two or three times but continue to have the problem. Since I am new to ACA, there is likely a setting that I have overlooked or accidentally changed.
I've run into a small problem while trying to export a drawing from paper space as a PDF. The drawing is of an electrical panel for a product. The panel is rather large, but the drawing includes some smaller details, such as a vendor logo on a component or a few extra lines on the border of a display screen. We have a large, multi page PDF file that uses A4 paper size that I need to insert this drawing into, so the export must be at this size. When exporting, I have CAD set to use monochrome and ignore the line weights, which solved my initial problem that the parts would show up as solid black splotches.
Now that the back story is over, here's the problem. When I export the pdf, everything looks great except these small details around the components. For some reason, the lines in the components will shift to one side or the other, causing breaks between features. Most of these breaks occur between an arc endpoint and a line endpoint. The export also excludes some smaller bits of geometry.
I have a 2D drawing that is drawn if full scale, it is 26feet wide approximate and 20 feet tall. I need to scale down to fit on a 4 X 8 for a mockup, i have tried using the scale command, but to no avail.
View 9 Replies View RelatedI do a lot of work where I start with a full assembly drawing, then make more drawings for the individual parts. Is there a way to link the title block parameters in the part drawings to the title block in the full assembly drawing? The only way I found was to link the parts together and then grab the info for the drawings off of the parts, but if I'm implementing this in a template used by others I want them to still be able to just fill in the blank on the assembly drawing to make it work.
I was able to get iProperties to show parameter buttons, but I haven't seen any way to link to other files or anything like that.
I'm trying to scale down 3D drawings but when I use the 3DSCALE command the perspective gets distorted. Is there a way I can scale my drawing without messing up the perspective?
View 7 Replies View RelatedI need a way to properly scale a drawing that I've pulled into AC..
Example, I get a drawing for customer in PDF that I have to trace into AC. Said PDF is marked 1/4 = 1. Up to this point I've been guessing at accuracy by measuring doors to 3'. I know this cannot be the prefered way
When I upload a drawing from the internet I save it as a wblock.when I insert it into my exixsting drawing it is not scaled to the same dimensions as the rest of the drawing.
I change the units to the same as the drawing befeore I save it as Wblock. But Im still having this Problem.
I have a drawing that was given to me by an architect with a scale 1:250 (0.004 in viewport). The architect drew everything in millimeters and it's a Site Plan, why ? I do not know. The units in the drawing are decimal-millimeters.
The page set-up for layout 1 was for 24x36 drawing size (typ.)I know need to make a layout 2 for a sheet size 11x17 but I can not get my viewport to scale correctly. So, if a 24x36 sheet size had a VP with scale 0.004 (1:250) then what is the scale for a sheet size 11x17 ?
I have a dxf file that consists of multiple rectangles (filled). I need to keep the X-Y position of each rectangle / entity the same but scale the size of the rectangle.
So for example, scale by -10%. If its a filled rectangle centered at (1,1) size (2,2) I need it to be centered at (1,1) and size (1.8, 1..
DXF is a text file and I can write a piece of VBA code to go through, decode the text, find the rectangles, scale, save the text file back to DXF.
I'm currently using Autocad 2012, how I can scale a text in viewport whose drawing was referenced in the model view.
fyi the referenced drawing is a survey drawing.
I am using the dinosaur version of autocad 14. I know it is old but is working great for what I want to do. I learned on 12 and was using 14 when I stopped working 10 years ago.
I am having trouble scaling my drawing. I remember that 1/48 xp is 1/4" scale. 1/64 ?? is that 1/8" scale?? 1/24 is 1/2" scale.
Scale in Layout. I drew my drawing in mm , and I want to use Layout to print it like I saw in a video, but how do I scale my drawing? For example, the counter and shelf I drew is 1:1 in the Model workspace(1600 by 2000mm) but in Layout, for printing on to an A3 sized paper how do I get it to print in 1:40 or something of that sort?
Right now I'm printing by using Fit To Paper with the dimensions included, but I notice our contractors are using 1:30, 1:40 etc. , my boss doesn't mind since I include the dimensions but I reckon it might cause problems in the future.
And is it possible to just select anything in my selection window, even 3/4 of a line? Because right now, I can only select the whole line no matter what, I only want 1/2 of it because I want to cut the whole drawing in half and move it apart.
By the way, is it possible to customize the panel? Instead of switching between tabs constantly, can I make my own panel? I googled this and tried using CUI but it is confusing. I just want certain sections grouped into 1 bar. Like... Draw/Modify/Attach/Windows all on the first panel.
I really want to be able to type in certain commands without hitting Enter, is that possible? If I hit M, it will move the object without me hitting Enter. Can that be done? Maybe not M, maybe Alt+1 to move, Alt+2 to Scale etc. etc.
i'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I work in both metric and imperial dimensions. I specify european cabinetry, and most of the architectural drawings i receive are for US clientelle so they're in ft and inches. When dimensioning, it's important that the cm dimensions are accurate for the factory, but the inches are accurate for the contractors.
So my drawing had 1 plan and 4 elevations. All drawn correctly. All scaled together, never one at a time. Yesterday morning everything printed correctly with this drawing.
Randomly, after some very minor changes to the drawing, 1 elevation remained at the correct scale and the plan, and 3 elevations randomly scaled down and at different scales from each other. Also, when i plotted this to a printer it matched what was on the screen. When i plotted it to PDF immediately after, the PDF's reflected 5 totally different scales where all 5 drawings and didn't match the screen or print. For example: a cabinet height in one elevation was 87cm, the next 86cm , and the next 83.9cm. Printed to pdf at totally different dimensions (see attached).
The file was closed and reopened, and the plan, and 2 different elevations were at an even different scale, smaller scale than before. They more closely matched what I got when plotting to a PDF.
I purged, and audited (no errors found), I copied only the bare bones necessary info into a new document, and scaled everything by reference to the size it needed to be. Most of the drawing automatically corrected themselves to the correct dimensions with the one step.
However, certain lines on my plans scaled at a far greater scale, while one wall was accurate, and one wall was off just a fraction. So even though i selected the entire thing and scaled it up together, different layers scaled differently. Basically i had to redraw the plan almost entirely.
The same happened with 3 of the 4 elevations. One section scaled correctly, one section scaled more than it should have and made that portion off.
So i had to redo that elevation as well.I created guidelines and set them where they need to be to align every single wall and cabinet and locked the layer in the hopes that if things move again, the guides will remain.
This has happened randomly with drawings previously, but only by a degree of .1 to .3 cm. I figured this was from scaling the drawings and dimension accuracy. While that was annoying, it was minor. This time we're looking at 2-8 inches difference which can really mess up a job if unnoticed.
what could cause only portions of drawings to scale differently than the rest and at random times even when the scale command hasn't been used? And between closing a document and reopening it? AND from printing to a printer and to a PDF?
I have a building plan that needs to be in 1:100. When put my drawing into the new layout its there. Then when I change the scale, my drawing disappears.
View 3 Replies View RelatedRetrieving attached file details of drawing file.
1. Attach DWG -- db.GetHostDwgXrefGraph(true);
2. Attach Image --
3. Attach DWF --
4. Arttach DGN --
5. Attach PDF --
I have an image of this.
What can i do?
I am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View RelatedNew Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
given I do a foreshortened view. Is there a way to fit the shortenings parameters to a view in a different window with a different reference file?
If not it would be a little awkward to achieve exactly the same result with a different file. As replacing references does´nt work with single view representation I´m stuck with manual- non constrained alignment of view details... which can´t be right I guess.
if there was a way to do it "right" without the need to switch to AutoCAD.
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- Factory Design Suite Premium Subscription-
I am working on a lab with cabinets. I changed the door to a single window (left/top image) from a solid door (right/bottom image) and now my renderings (left/top image) look like crap. Have I just pushed my card too far..
Using AutoCAD 2012 MEP, render set at Presentation 1024x768, walls are xref'd in.
PS - I did not spec the pc or cad package, just working with what my employer set me up with. Full pc stats are in my profile.
I would like to make some sort of an "online" catalog where the engineers could review details, and just tell the draftsmen the details they would like to include in their design set. I'd be very interested in any system that you might use. We, at one time, used printed booklets for the engineers, but got to be a hassle when details changed. Is there a good software system that might make this an easy task?
View 4 Replies View RelatedI have some doubts about Level of Details. How to constraint the assembly in Level of detail mode. I need suppress the features in position mode not in Level of Detail mode.
View 3 Replies View RelatedCan export the repair details from dwg drawing prepared by asd in to excel by the use of auto cad?
View 3 Replies View RelatedWe work on A3 size sheets and becourse we have a lack of plotters we can not exceed this size. What the next entails ... The details that we need to make understandable are something too small because there is just no space on the paper for us to make this really clear by eg using the scale 1:1.
Our question is:
-Can I place a created detail from Sheet 01 on to another sheet?
-Can I have a reference in the partkist to this Sheet 03?
Is there a way to change he default layer a detail comes in on. For example I go to detail manager and insert a section view of a W10X112 it is inserted on layers "A-Detl-Wide" and "A-Detl-Patt" I would like it ti insert on Layers S-Detl-wide and S-Detl Patt"
View 5 Replies View RelatedFor retrieving information about attach DWG file there is a API call "db.GetHostDwgXrefGraph(true)"
Similarly is there any API call for Attach Image files
i have many drawings in dwg but wish to upload onto my website...how can I convert a dwg file and retain its detail so it can be the same on my web page....have converted dwg to jpeg tiff gifff etc but it loses detail
View 9 Replies View RelatedIs there a quick way to detail parts from an assembly without having to browse to a part and then search through and select a part and insert a Base View?
For instance from within SolidWorks you can insert a view of an assembly and if you need to detail any part within that assembly you can simply click/select on the part in an assembly view and right click insert view then your View Menu pops up and you are moving forward. If you have to detail several parts you can spit out their Base Views in a matter of seconds. Even if you are making a seperate sheet just for the parts it is easier to insert an assembly view off the sheet and select the parts from there insert all of your part views then delete the assembly view if you want. You can also go to the properties of each view and link the balloons to your assembly BOM.
It is very useful if you are generating drawings such as I do with most parts for the assembly being detailed on the same sheets.
So is there a quick way to get the parts detailed?