AutoCad :: Importing PDFs Of Drawings?
Sep 9, 2010
I am wanting to import pdf's of drawings into my AC08. I just want them in there for reference purposes, i draw submittals and have them in pdf format and on paper, just on big jobs nice to be able to just scroll over and reference rooms and such. I dont need them to be to scale or scalable. I copied and pasted some in but they were so small, by the time i zoomed in on them they just look like a bunch of vectors and not very legible.
View 8 Replies
ADVERTISEMENT
Jun 17, 2011
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
View 5 Replies
View Related
Sep 5, 2013
Usually, whenever I opened a pdf in photoshop, it would come as the "background layer itself" with white coulour behind the text.
However, for some reason now whenever I open a pdf in photoshop it keeps comming up just like this:
How can I stop photoshop from doing this?
There should be a "background layer" showing up by default. Shouldn't it?
Instead the pdf is showing up as a single layer of text without a "background layer."
Is it possible to configure photoshop to keep this from happening?
View 3 Replies
View Related
Nov 22, 2012
I run a department that cleans PDF architectural drawings in Illustrator and Photoshop for use in online documentation software. I am currently working on creating spreadsheets laying out "if plan is 1/8" = 1', scale at 'X' %", etc, as up until now it is simply done by eye, but we try to scale up or down all plans to roughly the same size. While trying to determine a scaling ratio to create these charts, I realized that when I imported the same PDF into AI, it resizes the image, where as when I import it into photoshop, it imports it at full size. For example, I took the same PDF and dropped it into AI, and it was 2108 x 2881, and when dropping into PS it was 8788 x 12007
How can I import a PDF into AI and PS and have them be the same dimensions?I saved a GIF file 5,000 pixels wide, and it imported 5,000 pixels wide into both programs, so it appears I am only having this issue when working with PDF files.
View 1 Replies
View Related
Aug 19, 2013
I have a drawing with 72 layouts in it. I also have two drawings with one layout each, that I want to appear in the first drawing. How do I import the layouts from one drawing to the next? I found, "to import layouts as sheets", but it does not seem to be what I need.
View 6 Replies
View Related
Aug 22, 2012
i am having a BOM template for the parametric modelling i have created using the excel sheet input link.
when i create the drawing from the model the default Bom part list is coming, instead of that i need to get the Excel Bom Template i have created based on the input excel link.
How to get the Excel Bom Template in the drawing.
View 1 Replies
View Related
Apr 2, 2012
I have created a profile showing existing and finish grade. I can't seem to control the appearance of the existing grade line and the finish grade line individually. I need finish grade to be color 161 and existing grade to be color 252, but whatever I set as a color applies to both.
I have done this in the past with no trouble at all, but can't seem to get it to work now. I even tried importing settings from drawings with that display, but nothing has worked yet.
View 1 Replies
View Related
Jul 18, 2013
I am importing drawings from autocad which are known to bend correctly in real life. However, when I bend the parts on inventor, there is interferance with the corners. Material is 18 GA. HRPO, bend radius and k-factor are updated correctly (to my knowledge). In my "folded" image, is there a way to prevent the part from bending past the bend line?
Inventor 2014
HP Pavilion dv6t-6b00
Intel Core i7 2670QM
AMD Radeon HD 6490M
8gb RAM
Windows 7 64 bit
3Dconnexion SpaceExplorer
View 1 Replies
View Related
Dec 20, 2013
We currently utilize AutoCAD for our mine mapping purposes. I recently had a seismic study performed to determine the top of salt. I asked for a .dwg file of the contours that were developed. The .dwg file they provided does not have our autoCAD map on it. They are simply contour lines. These contour lines, however, have the same coordinate system as our mine map. The surveyor and I provided coordinate data to the company to develop the contour lines. I would like to lay these contours into our mine map. How do I import the contour .dwg file into our mine map file so that they lay exactly where they should?
View 4 Replies
View Related
Nov 26, 2013
I am facing problems with my autocad when i import Revit drawing to it. The file start working extremely slow, and crashes often.
View 1 Replies
View Related
Jul 26, 2010
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
View 7 Replies
View Related
Dec 28, 2012
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
View 5 Replies
View Related
Apr 2, 2013
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
View 5 Replies
View Related
Jun 16, 2008
I figure many of you do as I do, drawing things to plot blueprints. It just so happens that I'm often sent PDFs of drawings to plot, but for some reason I have trouble with them.
Suppose I have a standard drawing that is meant for a 24x36 Arch D sheet size. It will always plot 36" because it has to, that is the paper width of the roll. But for some reason, it will stop shy of 24" and cut the paper as much as 4 or 6 inches short, instead of printing the full 24".
The drawing inside the PDF is exactly right, the Adobe Acrobat Reader shows the drawing fine, it fits within the margins, it's not scaled, the sheet size is shown accurately. Based on the visuals and settings, all things are great. I've got the paper set to 36" roll, opaque bond, no scaling because I need it to print accurately.
However, when it prints, some of the drawing is cut off at the bottom and at the top, and instead of 24" it cuts the paper at 18 or 20". I don't get it. It shows 24" in the print wizard, the correct paper size is shown, the preview images looks great. All things check OK, and then it prints and cuts off the graphic and makes a short sheet.
I'm afraid to try scale to 100% or scale to sheet size, because the people who have to use this need to scale it on paper with a ruler and I can't have it stretching or shrinking the print.
What gives with Acrobat printing? Need to plot PDFs accurately? It would be one thing to simply cut the sheet where the graphic ends, but this is actually stopping shy of printing the graphic altogether and cutting the sheet early before it reaches 24".
View 9 Replies
View Related
Oct 24, 2012
I have over 150 ISOs made and ready to be converted into PDF but I don't know a way to do this without opening each one idividually and printing it to my PDF writer. There must be an easier and faster way to do bulk PDFs.
View 3 Replies
View Related
Feb 16, 2012
Is it possible to create a 3D PDF from Inventor 2012? Or is there a third party software that is needed to do this?
View 9 Replies
View Related
Sep 7, 2012
I'm used to using AutoCad R14 and just recently had to purchase AutoCad 2010. The printing service that I have to use has to have the drawings in a PDF format and I found out how to make the conversion. However, the lineweights, the linetypes and the linetype scales are all out of wack. I have read about setting up a CBT file, but apparently I'm missing something someplace. I want to plot by color to achieve lineweight. Linetypes and linetype scales are set when the object is drawn, where the default is Continuous and 1 respectively.
View 3 Replies
View Related
May 28, 2013
I am trying to get my PDF's to be 22x36. My only available printer is 11x17 and for some reason Adobe Standard that I have isn't working for me.
View 4 Replies
View Related
Feb 24, 2012
I have several pdf's that I have inserted into a dwg file and when I attempt to plot the file they print with transparency. I have adjusted the contrast, fade and monochrome settings to no avail (also assigned line weight is not set for transparency). Interestingly, the print preview window shows the attachments correctly, but the resulting pdf file when printed contains the attachments printed very faintly.
View 4 Replies
View Related
Jul 18, 2012
We need to be able to print each sheet to it's own PDF (preferably automatically naming the pdf in the process). I can't seem to find a way to do it in Inventor itself or the Task Scheduler. I imagine it's something that needs to be present in the PDF driver, but CutePDF and Acrobat Printer don't seem to have that option. Is there one that does?
Surprisingly, AutoCAD and Revit BOTH have this ability. Inventor seems to be the only Autodesk packaging lacking the ability.
View 2 Replies
View Related
Aug 8, 2011
I have been using CorelDRAW to PDF's with vector information to DWG's. It is not something I do often so it was fine. I got a few more PDF drawings and decided to try the converters available. These are the trial versions, but the output seems to be worse than what I get with Corel.
View 7 Replies
View Related
Jan 24, 2012
Every time I try to plot something with a PDF embedded it takes a very long time to spool and plot. Additionally, a PDF in the drawing slows it down so significantly it's almost not worth using..This happens whether the PDF is less than 1 MB or 50 MB...no difference. Has this been fixed in 2012? Why to PDF's do such a drain on system resources when they're such small files to begin with?
View 5 Replies
View Related
Jul 12, 2013
noticed that the file size of pdf's created using the publish command in C3D 2014 are much larger than files created using 2013? I'm talking twice the size in some cases. I've gone through the settings and found no differences, but there must be something I'm missing. When I use the plot command on a single layout, the file sizes are similar, so there must be something in the publish command.
C3D 2014 HF1
View 7 Replies
View Related
Jul 26, 2013
Using the autopublish command, I'm getting PDF files that display just fine on my monitor, but then when I try to print I get this series of error messages:
"The document could not be printed."
"There were no pages selected to print."
"A drawing error occurred."
But the most frustrating thing is that it only happens for some .dwg files, not all. It seems that the larger they are and the more pages involved, the more likely they are to produce this error.
EDIT: I just went through and tried to print page by page. It turns out of the 22 pages, the only two that won't print and give the errors above have no viewports and are just two large tables filled with text. Is there anything I can do to these tables to make the pages print?
View 1 Replies
View Related
Jan 6, 2010
AutoCAD MEP 2010
I've used batch plot to make pdf copies of my drawings in version 2004 and did not have this issue:
In 2010 when I use batch plot to pdf (say for 5 drawings), it produces one single pdf file with 5 sheets. I want an individual pdf file for each drawing (5 pdfs).
I don't want to have to open each drawing and plot. That's what batch plot is for!
View 7 Replies
View Related
Jun 8, 2011
I am having a problem getting PDFs to plot when I have plot transparency on.
I use the dwg to pdf plot function and with plot transparency on... my hatches work perfectly but my PDFs appears very much screened. (As a 50% or more screen would look) If I turn off the plot transparency, the pdf works perfectly but of course my hatch shades obliterate any line work beneath them.
I was able to convert the PDF to a .tiff, with a graphics program... increase the resolution to 600dpi and use imageattach to bring that in. But it is an extra step for each insert and increased dpi = increased file size.
Other than increasing the resolution on the PDF, any way around this "screening" issue on PDFs when plotting with transparency on?
View 9 Replies
View Related
Jul 30, 2013
I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
View 3 Replies
View Related
Sep 26, 2012
Publishing to PDF as single sheets for insertion into other documents or page managers (such as Indesign) works fine, apart from the fact that it makes crappy work of JPGs should any be embedded in the CAD file. Plotting individually using high quality PDF settings also works but it's difficult with large sets.
Therefore, I would like to publish a tab set to PDF using the plotter named in page setup. However, what this does, is it forces me to pick the file name and locaiton each time, rather than using the one specified in the publish dialog. Is there a way around this? That is, can I make the named plotter behave like the "DWG to PDF" one (that is, name the files automatically)?
If not, can I make the "DWG to PDF" one not compress JPGS?
As to why - I work in a mac environment and everyone draws in Illustrator. I use CAD and many times, for large projects, need this sort of page management. And every once in a while, I need to insert a rendering into a CAD document and then publish.
View 3 Replies
View Related
Nov 4, 2013
I’m having a user profile issue on one computer. I have a user, using windows 7 and AutoCAD Civil 3D 2014 on his work station. When using Civil 3D he has two issues: one, he cannot import Dgn’s. I’ve tried everything it just won’t work. Second, he cannot xref or insert PDF’s into a drawing. Now the reason why I say this is a profile issue is because if I log on to his computer (or anyone else log’s on his computer), I can do all those things in Civil 3D, import DGN’s & insert/xref PDF’s. If this user log’s on my computer, he can do all those things in Civil 3D. Import DGN’s & insert/xref PDF’s. Something with his profile on his computer is corrupt and I’m trying to fix it without deleting and creating another user profile.
View 5 Replies
View Related
Apr 9, 2012
is there a way to code inserting all pdfs in a multi-page pdf at once?
another one would be, say, you have several pdfs in your dwg that represent different aspects of the same space so you select them (they are on top of each other) and it puts them into a dynamic block automatically in different visualization states (maybe labeled 01,02,03 etc.) and you make one of the sheets visible with a drop down button.
i might be able to figure out the later if there is a way to do the former.
View 2 Replies
View Related
May 9, 2012
I'm looking for a field or maybe piece of rtext that can display any pdf's that are showing in a drawing, I've had no luck in finding anything that can do it.
View 4 Replies
View Related
