I'm using Office 2010 and AutoCAD 2014.
When I copylink a layout into Excel, there are no cropping handles.
I need to be able to embed the drawing into excel, then be able to crop it.
I link an excel spreadsheet of text into my .idw files and I constantly have this issue where the text is crowded (see attached). I've tried changing the font, etc. but nothing seems to work. Every once in a while if I move the linked sheet within the .idw it corrects itself.
I'm using Inventor 2012.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Got a new computer, put AutoCAD LT 2010 on the machine, justlike the rest of the office, but also installed excel 2010, when the rest ofthe office has 2007. when insertinglinked spreadsheets from the new computer, and we update the links on our oldcomputers, Acad fatal errors out. Thisis because of the difference in the excel versions correct?
View 1 Replies View RelatedI have set up some autocad tables that are linked to excel data( using relative path) in an Autocad Architecture project template. In the xref dialog box, the data links are show as relative path e.g. ..Standards excel file
After creating a new project from this template and right-clicking in one of the cells which have linked data and selecting "data links" and "open data links file" it opens the template excel file, not the excel file within the project folder.
If I use the xref command, select and right click one of the excel data links and select "open" it does open the correct excel file located in the current project folder.
The xref dialog box does show all the data links as relative path e.g. ..Standardsexcel file.
I have linked a table from excel into autocad 2012. I have selected "Start with excel formatting, do not update" in the datalink options. My problem is when I break the table the first table will keep my formatting changes - text height and alignment, but the following table breaks do not stay the same once I close and reopen the drawing
View 1 Replies View RelatedI have a new issue that I am unsure what to do about.
This has never occurred with previous version of ACAD and this is the first time I created data links with Autocad 2012, and I am using the same procedure that I have successfully used in the past.
I have data tables linked to excel spreadsheets. I used the "TABLE" button on the ANNOTATE ribbon to place the table, and the layout of the cells assumes the layout of the excel spreadsheet, which is what I want.
As long as I don't Scale the table, I can Update the data table links just fine.
However when I scale the table and then update table links, the table layout changes drastically, and is undesirable.
I have tried locking the cells' but that will not fix the problem.
I want to keep the layout of the table that is assumed when I place the table originally. Is there any way to lock it as such?
How to insert a linked excel table into my drawing, however I have not figured out how to add rows to the table, the option is greyed out. I can insert rows above and below the (inserted) table but not anywhere in the middle.
I've tried everything I can think of, even removing all the formatting in the .xls spreadsheet to no avail. The cells are unlocked, I can manipulate the data, but not being able to insert rows is really hindering the efficiency of using a data linked table.
We had a client who could not open our drawings that had linked Excel spreadsheets in them even though we supplied the spreadsheets. The drawings would crash AutoCAD when they tried to open them.
My solution was to open the drawings, pick on the Linked Spreadsheet OLE in the drawing, Ctrl+C (Edit > Copy) then I Edit > Paste Special > As Image. I would paste it in at the lower left corner of the existing spreadsheet.
I set the properties of the new OLE so the Lock Aspect Ratio was Off or No and drag the upper right corner of my newly inserted image to the upper right corner of the existing linked spreadsheet so it would be a perfect match.
I then erased the existing linked spreadsheet.
Now they can open the files and we don't need to include the spreadsheet when we send the files.
[URL]....
I just began messing around with linking excel and autocad (disappointed that you can't link to .xlsm but that will go on the wish list). I was wondering if there was already a post as to how to not lose your fields when you download from source. I have a table that has fields from my sheet set with drawing names etc...but everytime I click download from source it converts the field to plain text.
View 9 Replies View RelatedI have a excel sheet linked to my inventor file and I cant delete it. I really only need to change the starting cell, but I can't do that either. It works on some parts to right click on the folder in the parameters window and then select delete or change start cell, but on others it doesn't work.
View 5 Replies View RelatedI recently decided to see how the AutoCAD tables work. I was very happy to learn you could link your Excel spreadsheets with CAD. But now I have a problem.
After inserting the table it refuses to use the table style I have set up. The fonts do not want to change at all. I can change the colour of the text, but not the font.
PS: Using AutoCAD 2011
I have been using a lisp routine to strip formatting from a linked excel sheet. (stripmtextV5) .When I try and run it on a sheet today it says some cells are locked. I've changed the cell format in the excel file to unlocked. I have unlocked the cells in the linked table. Yet it still says that some cells are locked...I have even picked in each cell to verify each one is unlocked.
View 5 Replies View RelatedWhen I add parameters to Excel, the new parameters do not show up in the linked parts. Even when starting
a new part and linking to the same excel file, the original parameters are all that are shown; not the new ones.
I've started using tables linked to excel files for drawing index on cover sheets. My problem is when I delete or add lines on my excel sheet it changes the format on some of the cells changing font size and justification on some cells of my table. The changes to my table seems random.
View 3 Replies View Relatedlinked Excel file to Inventor 12 file parameters. Windows 7, Excel MS office professional '10. Linked excel file, here dimensions are driven by parameters which are driven by excel. toggled 'immediate update' Still - i have to open the sketch - it shows the updated number from Excel, but only on opening the sketch will it change the model to use the new dimension value.
View 3 Replies View RelatedI have several parts which I wish to modify, but, those modifications are only being done to get some prototypes made. I do not want the changed (non-approved part) to be used in current issue drawings, assemblies etc. until I have proven the modifications and am happy with them.
I can do this by doing a save as on the part and could just replace the previous design, but then I lose the history of changes/revisions shown in Vault which is critical to me and part of using vault in the first place.
I'm trying to figure out a way to do the following:
I have several drawing files in DWG. Each DWG has a block placed in a drawing sheet. The block contains attributes which would like to link to an Excel file.
Then if I update the attribute in the drawings this would change the linked attribute in the Excel file, and vice versa.
Note that there are several drawings which I would like to handle in a single Excel file.
I am not a user of AutoCAD and i am only using it to try and convert the drawings that i have into an excel or csv format.....
I am running AutoCAD 2009 and the drawings are "tables" per say.....with a generic block template from an engineering company, along with text and the company logo.
Is there a way to bring this into excel for easy formatting as i am not an experienced or trained AutoCAD person.....
This probably isn't the correct discussion group but not sure where else to post this.
My sales department wants to be able to create drawings based on entries in selected in their Excel qouting tool. Basically, they want to configure a product in the field, and be able to show the customer the drawing with TrueView. (They don't have AutoCAD installed).
I would think the best I can do, is manipulate a .dxf file based on their selections but that may get very complicated.
I am using AutoCAD Mechanical 2013. (Full version).If there is SLD with different HP rating, tag names and different cable ferrule numbers, and if there is any small change in HP rating of motor or small change in tag name, then it is time consuming work for me to go to AutoCAD and change the text by referring Excel sheet.
Is there any way to link excel sheet to AutoCAD drawings? So i can take updated excel sheet and link it with AutoCAD and if there is any change in excel sheet then it will be updated in CAD file as well.If there is any setting or grid referencing to be made. I am ready to do the required changes to meet my requirement.
I know you can insert an Excel spread sheet into the general table and have that show up on the drawing, but it has limitations to it that Excel gives you. My question is there a way to bring the Excel spread sheet into the drawing that would give you Excel functionality?
View 9 Replies View RelatedI have LT 2012. I use Excel 2010 into my drawings to set up tables. When I opened the drawing I've been working on, I had lost all of yesterday's data. Command History shows dozens of these notations, "AcDbLine(41859) XData Handle Unknown, Null" In Help it says you can no longer turn handles off, so it should be ON. How can I point the drawing to my Excel data?
View 2 Replies View RelatedMy designer has created an Illustrator file on his Mac that has linked images. When he sends me the all the files and I open the ai file in Illustrator CC on my Windows PC, I need to re-link the images. One image can't be found at all.
However, if I open the file in CS4 it finds the linked files no problem.
Is this some bug in Illustrator CC for Windows?
I found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered.(maybe in cs6? we are still using cs5)For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
View 4 Replies View RelatedWhen I link in an excel document to my model all parameters in that excel gets the unit (mm).
How can I change this? For instance I want some of the parameters to be an angle.
Recently I have been trying to build table driven products and ipart tables, but when I copy a member to create a new part number, upon exiting the iassembly author I get the following message "excel installation is required for this operation. failed to launch excel". I have a fully functional version of 2010 Excel installed which has been used so it should be recognized in the windows registry. I am running Windows 8 and Autodesk Inventor 2014.
View 6 Replies View RelatedI have AutoCAD 2013 and often "paste special" excel files that automatically update when the excel file changes.The problem I'm running into is I work with a person who has uses an older version of CAD 2004, so I always save to the older format for him.
When I etransmit, I be sure to add the excel file, but when he opens the dwg, only the outline of the excel appears in his dwg, no content.
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
when I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View Related