I have LT 2012. I use Excel 2010 into my drawings to set up tables. When I opened the drawing I've been working on, I had lost all of yesterday's data. Command History shows dozens of these notations, "AcDbLine(41859) XData Handle Unknown, Null" In Help it says you can no longer turn handles off, so it should be ON. How can I point the drawing to my Excel data?
View 2 RepliesI've previously used Autocad 2008 Electrical. I've just started a new job and I have been asked to update some electrical drawings from a recent project. My current employer use Autocad 2010 as opposed to Autocad Electrical which I have previously used.
The problem I have is that I have a drawing with a table linked to an Excel spreadsheet that displays an I/O table.
Since the drawings have changed the amount I/O has increased.
I have a new excel sheet with the new I/O list which is larger than the old I/O list.
When I "point" the Table to look at the new spreadsheet in the "Modify Excel Link" Dialogue and alter the "Link to Range" Tab to my new desired excel sheet and apply the changes the table. The new excel sheet populates the table correctly until the end of the old table used to stop then the format goes all to hell and the new part of the table is way out of scale and at 90 degrees out to the original table.
I think I am possibly missing a step somehwere when updating the Data Table Links!?!?....Do I need to alter the table properties somewhere too?.
How can know if entities are being manually copied and pasted between drawings.A thought is to add a GUID to each entities Xdata and check if the value is in the named object dictionary.
View 6 Replies View RelatedWell I had a day and a half trying to figure out how to bring Excel data into LT. Again. Here is what I have found out:
Running Excel 2010 I have a xls files (of type '97-2003 xls - file includes VBA). The file spits out a ton of data that I want to put in a schedule in AutoCAD. The schedule format needs to match our standard format - RomanS in white and blue.
If I copy and paste as a link the font remains stuck as Arial (regardless of source font) and can't be relaxed unless you go one cell at a time in the text editor. Also the resultant table size is tiny -
If I save the file to .XLSM (macro enabled '10 excel file) the results are the same. If I save the file to .XLSX ('10 excel file and ditch the VBA project) the results are sublime - the font is ok and I can go back and forth from AutoCAD to my now broken spreadsheet because VBA IS MISSING! The resultant table size is tiny but I can deal. I don't see how AutoCAD can work with xlsx but not xlsm.
I also found that if I save the sheet (values only) as a .csv file I can use that to create a table from file without font overrides screwing everything up.
I'm running AutoCAD LT 32bit on a Win7 32bit OS. My Office version is 2010. I would like to link data to a '97-'03 version of an xls or an xlsm without having the font overridden to Arial.
I am trying to insert tables into AutoCad from excel the problem that I have is with the text style.
Every time I copy and paste as a linked AutoCad entity the text does not come across as the correct text style - for example if I want the table text to come out as ISOCP it comes across in a bolder text, requiring me to enter in the cell and select ISOCP I don't have to highlight the text in the cell i only have to enter inside the cell.
See the attached video.
I'm trying to do a spreadsheet inside a drawing. Trying to use fields because I believe they behave better with feet and inches than excel (without jumping through hoops)
View 1 Replies View RelatedI have set up some autocad tables that are linked to excel data( using relative path) in an Autocad Architecture project template. In the xref dialog box, the data links are show as relative path e.g. ..Standards excel file
After creating a new project from this template and right-clicking in one of the cells which have linked data and selecting "data links" and "open data links file" it opens the template excel file, not the excel file within the project folder.
If I use the xref command, select and right click one of the excel data links and select "open" it does open the correct excel file located in the current project folder.
The xref dialog box does show all the data links as relative path e.g. ..Standardsexcel file.
tried to insert Excel tables into 2013 3D? It worked fine in 2012 but we just upgraded to 2013 and it no longer works. We get an error message that Excel is not supported. Is this a new feature or a bug? Also, our old drawings with the table already inserted does not plot normally. The table characters print at diffent sizes.
View 9 Replies View RelatedI have a new issue that I am unsure what to do about.
This has never occurred with previous version of ACAD and this is the first time I created data links with Autocad 2012, and I am using the same procedure that I have successfully used in the past.
I have data tables linked to excel spreadsheets. I used the "TABLE" button on the ANNOTATE ribbon to place the table, and the layout of the cells assumes the layout of the excel spreadsheet, which is what I want.
As long as I don't Scale the table, I can Update the data table links just fine.
However when I scale the table and then update table links, the table layout changes drastically, and is undesirable.
I have tried locking the cells' but that will not fix the problem.
I want to keep the layout of the table that is assumed when I place the table originally. Is there any way to lock it as such?
I just began messing around with linking excel and autocad (disappointed that you can't link to .xlsm but that will go on the wish list). I was wondering if there was already a post as to how to not lose your fields when you download from source. I have a table that has fields from my sheet set with drawing names etc...but everytime I click download from source it converts the field to plain text.
View 9 Replies View RelatedI want to export data from AC3D to Excel; I've tried to do it with copying directly the tables I made, but it isn't text or number format.For example, I want to get the data from this table:
I know that with previous versions of autocad it could be done.In addition, I also want to get value table of the calculated cant of the "Cant Tabular Editor":How can I get a table of this data? I need it because I have a lot of curves and I want to do some verifications of the standars of my country.
I'm trying to import an excel table into AC as an AC entity with a datalink so I can update the excel file. However the AC entities import looks like a disaster! (see picture)
How can I import it in a way that will more accurately maintain more of the formatting of Excel? I'd rather not use the MS spreadsheet import because then it looks distractingly unnatural...
I imagine there isn't really a solid answer for what I'm trying to do, just looking for some tips and tricks to make it slip in a bit better
Untitled.jpg
I've started using tables linked to excel files for drawing index on cover sheets. My problem is when I delete or add lines on my excel sheet it changes the format on some of the cells changing font size and justification on some cells of my table. The changes to my table seems random.
View 3 Replies View RelatedI have a lot of drawings with two tables in them, and they are all over the place.
I'm able to change the columns widths using the following
(setq PipeList (vlax-ename->vla-object (car (entsel))))
(vla-setcolumnwidth PipeList 0 0.25)
(vla-setcolumnwidth PipeList 1 0.25)
(vla-setcolumnwidth PipeList 2 2.0)
(vla-setcolumnwidth PipeList 3 1.5)
(vla-setcolumnwidth PipeList 4 1.625)
(vla-setcolumnwidth PipeList 5 1.0)
(vla-setcolumnwidth PipeList 6 1.75)
I'm wondering if I could modify the assoc 10 value to a specific point of '(8.5 10.3675 0.0).
Whenever I open a drawing in a certain project this error message always pops up.Some of the message details are:
-Parameter ERRCODE; Value 786433
-Error 786433 - Conflict between data tables in open drawings (57 consecutive occurrences)
-Parameter: APPLNAME Value: ad
-Parameter: CLASSNAME Value: airfield
this message box stops popping up when I open the drawings?
I'm really in trouble at work on linking Microsoft excel tables to Photoshop. I have some excel tables. I want to import them into Photoshop (not as an image) that when i changed the values in cells (excel) i want the Photoshop file to update.. Should i use a script or any programs?
View 3 Replies View RelatedThe calibri font used for graphs in Excel are not recognized when the graphs are copied into Adobe Illustrator. Other than changing the font to arial or another font. I upgraded from CS4 to CS6 on my mac and I still get the same error, "An unknown shading type was encountered," and the letters in the chart get substituted with jumbled symbols. I've tried copy the chart directly from excel to illustrator as well as saving it as a pdf or postcript file and then opening in illustrator. But neither approach works.
A friend managed to open the chart in Illustrator (CS5 on a mac) which gave the prompt that it cannot read the font and that it will display it as outlines. This worked and the text was displayed properly. But for some reason I never received this promopt whether using illustrator from CS4 or CS6.
We are looking to upgrade from AutoCAD 2009 to V2012 and I have a copy for testing purposes.We have several custom commands linked to menu icons for added symbols such as a gate valve, ball valve etc.
Most of these use the following command
^C^C^C^P(setq #prompt T #bname "V:/blocks/pefs/bfl")(princ);BBLOCK^P;
I've worked out that"V:/blocks/pefs/bfl is the location of the block drawing and is stored in #bname, the #prompt is set to tell the block (#bname) to break the line and insert, or, if nil instead of T, then just insert the block over the line. When I click on the icon when using AutoCAD V2012 I get
unknown command "BBLOCK"
but it works just fine in 2009. I can see no reference to BBLOCK and can only assume it is a variable of some sort. I've spent hours searching the forums to no avail.
I was wondering if there was a way to get the object handle ID to display when rolling over an object or failing that, to get the handle ID to show up in the object quick properties?
At the moment I have to select each object and type LIST to get this information and it's very time consuming if I want to check the handle IDs for multiple objects.
I'm trying to figure out a way to do the following:
I have several drawing files in DWG. Each DWG has a block placed in a drawing sheet. The block contains attributes which would like to link to an Excel file.
Then if I update the attribute in the drawings this would change the linked attribute in the Excel file, and vice versa.
Note that there are several drawings which I would like to handle in a single Excel file.
I'm using Office 2010 and AutoCAD 2014.
When I copylink a layout into Excel, there are no cropping handles.
I need to be able to embed the drawing into excel, then be able to crop it.
I am not a user of AutoCAD and i am only using it to try and convert the drawings that i have into an excel or csv format.....
I am running AutoCAD 2009 and the drawings are "tables" per say.....with a generic block template from an engineering company, along with text and the company logo.
Is there a way to bring this into excel for easy formatting as i am not an experienced or trained AutoCAD person.....
This probably isn't the correct discussion group but not sure where else to post this.
My sales department wants to be able to create drawings based on entries in selected in their Excel qouting tool. Basically, they want to configure a product in the field, and be able to show the customer the drawing with TrueView. (They don't have AutoCAD installed).
I would think the best I can do, is manipulate a .dxf file based on their selections but that may get very complicated.
I am using AutoCAD Mechanical 2013. (Full version).If there is SLD with different HP rating, tag names and different cable ferrule numbers, and if there is any small change in HP rating of motor or small change in tag name, then it is time consuming work for me to go to AutoCAD and change the text by referring Excel sheet.
Is there any way to link excel sheet to AutoCAD drawings? So i can take updated excel sheet and link it with AutoCAD and if there is any change in excel sheet then it will be updated in CAD file as well.If there is any setting or grid referencing to be made. I am ready to do the required changes to meet my requirement.
I know you can insert an Excel spread sheet into the general table and have that show up on the drawing, but it has limitations to it that Excel gives you. My question is there a way to bring the Excel spread sheet into the drawing that would give you Excel functionality?
View 9 Replies View RelatedIs there any way to control the line spacing when you have text within a cell of a table? Specifically I want to change the spacing to act similar to 'EXACTLY 1.0' like in the MTEXT editor. Please see the included dwg.
View 3 Replies View RelatedI've cut and "paste special" a table from excel to autocad, and would like to edit several (not all) cell's text color from the default (in this case white) to the bylayer color.
When I set up my table style I specified the text to be bylayer, however apparently a paste from excel ignores the setting.
Can export the repair details from dwg drawing prepared by asd in to excel by the use of auto cad?
View 3 Replies View RelatedI have a table imported into autocad from excel, however despite the table (excel) being formatted, border lines appropriately placed and hidden througout the sheet, all off the border lines of the cells appear when imported into autocad.
is there anything i can do to hide back some border lines for selected cells?
I created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
I am trying to add an excel document to a cad drawing using ole. I wish to make it transparent so that only the cells themselves are visible and not the white background and empty cells. (I hope that makes sense).
View 3 Replies View Related