i am having trouble with rendering two of my drawings. The rest have rendered fine. but these two drawings just show black when rendered. I've put in more lights, I've taken out lights, I've copied drawing into a new file.
View 2 RepliesI keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies View RelatedI am wanting to either render of hatch some linework. I'm wanting to make the ring red around the outside and grey on the inside ideally.
When I try this though,it keeps prompting me that the object isn't one the same plane, or something along those lines.
I've attached the drawing file I am talking about, and its 2013 format.
I recently re-installed my AutoCad 2002 on an XP-SP2 computer.
I used to be able to do a windows copy or copy with basepoint and paste the item into another drawing.
Since I put AC on the XP computer, this does not work.
I usually open several drawing and use"drag and drop".
But something has happened.
Now, I can only open one drawing at the time. When I try to open the second drawing, the program close down the first.
What have I done ? and what shell I do ?
I have been using 3 common table styles for our drawings and use design center to drag them (from one drawing, where they all reside) into my drawings. I have recently tried this and for some unknown reason they are not coming into my drawing.
I purged everything and still no luck. When I open a new, blank drawing and try it, it works fine. Not sure what could be preventing this command from working in the drawing I'm trying to get these tables into.
Someone was using my computer and maybe they clicked on some button but now if I am in a layout and double click on my viewport I can not change the View Scale by typing in a custom scale.
I typically work in meters and do subdivision layout so I use 1:500 up to 1:5,000 but now even though the view ports are unlocked the number will not change when I type it in but I can zoom in and out with my mouse.
I can pick a scale in viewport scale like 1:5 1:1 but prefer to type in my scale as I like to plot it.
I would like to Password Protect some of my drawings. I have tried several times with no success. When trying to set Password, I don't get a Password Confirmation Screen.
OS: Windows 7 Ultimate (@ home) Windows 7 Pro (@ work)
AutoCAD 2013
Also have the same issue with 2012, and 2008.
I'm creating 3D architectural models; primarily interior views. I use the ANIPATH command quite frequently and I'm good there.
However, I have not been able to render a still camera view that shows the lighting and resultant shadows. Whenever I attempt to render a still from a particular camera; I set it to realistic. It shows the 3D objects with materials; however not the lighting.
I've been using ACAD for about 15 years now, and consider my skill level upper-intermediate.
So far, the only successful still renderings I've been able to do are those directly associated with the typical ortho views: i.e., NE, NW, SE, SW, front, back, etc. But no avail on rendering from the camera point of view.
I have WMV 1080p30 source files that I am trying to render to an 5-6min MP4 HD file for upload to Youtube. I am able to make WMV HD files, but wanted to see if MP4 HD files would make a better final outcome on Youtube (Youtube seems to add a lot of jaggies to my WMV uploads). However, whenever I try to render anything to MP4 HD, VSX3 crashes (it never gets past the "Creating files" message). The windows error log states that the faulting modules are kernel32.dll and ntdll.dll. I have QT 7.6 (not the latest) installed. I have XSVX3 updated to SP2 (although the file downoaded was patch3.exe). In the Make Movie template and in Share/Custom , I don't get the option to see/manipulate any MP4 HD formats or even use H.264 compression. When I bring up Mpeg-4, it allows me to use mainly standard-def or non-HD resolutions and on-H.264 codecs. Is it not seeing the profiles/codecs for HD H.264 from Quicktime? Do I need QT Pro or just the free QT? I can render MP4 non-HD. As an aside, I see no sign that CUDA is being utilized.
View 1 Replies View RelatedI have a project I'm trying to render to an mp4...I previously rendered 2 different versions of it, then after this morning when I re-edited and finished the project, it doesn't let me render an mp4.
If I try to render, it goes through the whole process and then I watch as the file disappears when rendering is complete. It let me render to an AVCHD file, but it won't let me render an mp4 from it. I tried uninstalling/reinstalling VS x4 and installing the SP but nothing works.
I have a 3D (Camera View) of an interior where I have a number of picture frames placed on the walls. Each frame has a painting 'Decal' and all but 1 render correctly leaving a blank frame.
View 9 Replies View RelatedI was just doing a bunch of test renders and playing with lights when a weird render turned up out of nowhere that is sort of a transparent red and black? This happened yesterday, but it actually crashed maya. This time around, it didn't crash, but I'm unable to save my scene. This is the log for the error:
file -f -save -options "v=0" -type "mayaAscii";
// Warning: Could not save file "/var/folders/lw/y5yl1nl11cl9plpn2gsdrvg80000gn/T/tempUIFileHSDZdN". //
// Error: swatches file open failed
/Users/Undeadmau5/Documents/maya/projects/PRM/scenes/.mayaSwatches/PRM_WK4_AllMaps.ma.swatches //
// Error: Could not save file "/Users/Undeadmau5/Documents/maya/projects/PRM/scenes/PRM_WK4_AllMaps.ma". //
// Error: Cannot find procedure "mayaFileOptions". //
// Error: Cannot find procedure "mayaFileOptions". //
Also attached is an image of the render.
I have a issue with the wrap stabilizer, there Is an error that comes out and say unable to obtain video rendere.
View 3 Replies View RelatedSince I upgraded from CS4 to CS6, I am unable to use the FILTER > RENDER > LIGHTING EFFECTS. Why is this? Also, My eraser brush disappears after working on multiple files.
View 1 Replies View RelatedI can't seem to get max to render to texture properly with network rendering. it renders just fine on one machine, but whenever i run it through the network option it saves the wron part of the strip.
I have tried it with several different machines and several different files and none of them work.
I have been playing with GIMP now for several months and love the program. One problem I have run into is I cannot figure out render the background of an image transparent so it can be merged with another image. Now, I have tried to read the instructions numerous times, but I have no background in understanding what a path is and several other terms. I have failed time and again and finally decided this is not something I can learn to do on my own.
Warning: I'll be honest. I have no experience in any form of image manipulation and even simple things might need to be explained.
I bought this AE file URL...Here is the error message I get when trying to render...After Effects error: Unable to allocate enough memory to render the current frame (18172 x 18172 @ 8 bpc). Either decrease the memory requirements for the rendering of this frame, or install more RAM. (12805). For more information, see adobe.com/learn_ae_mem (7 :: 66)
I even tried to render the project without making any changes. No luck
Is my laptop inadequate for this type of work?When it says - (18172 x 18172 @ 8 bpc) is that the resolution it's trying to output? The project is 6 seconds long and 1920x1080 resolution. I can render it at half resolution, but not at the 1080 res.
I have a strange problem with my Corel X5 since its re-installation due to a re-installation of my Windows 7 system (A problem of internet connexion) :
Usually, I create drawings, saved in .cdr but also in .emf to be used in Winword 2010. But, now, if I save my drawing in .emf, the drawing is planed down on the right & below sides! I mean, the border is slightly "eaten", missing!
The problem is not Word : if I open the .emf file in Paint, the drawing is already planed down! So, it's Corel fault. But why? It's the same Corel as before, my Windows environement is the same (But may be some parameters disapeared with the re-installation of Windows 7?).
By the way, if I save with .wmf format, the two borders (right & below) are "eaten" but less, the thickness of the disapeared border is very small, but it is!!! So, the result is, now, I can't have any of my drawings created with Corel in Word with their entire integrity, since a part, border at the bottom & border on the right side, is missing!
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies View RelatedI'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
The same scene, same settings, produce 2 very different outputs in max 2011 and 2012, render to texture for normals is currently useless in max 2012.
The blue one is a correct tangent normal map created from a sphere in max 2011, the colored one is the the one created inside max 2012 from the same objects and settings, and the last is another sample of normals generated in max 2012.
Each time I want to have batch render with 4 camera views. I thought it would provide me with elements along with it. But it just brings me only one file as I set .png.
I know it works with State Set by changing camera view. But Batch render should work too.
I can´t believe it. Save 50% Rendertime. Fix the Render Elements Bug with Render Optimizer V3! deactivate "contrast all Buffers" with RO V3, and you have the same speed as Vray Renderelements.2014 can comming! URL....
View 3 Replies View RelatedOkey, so I want to render a normal map directly from render production. Pretty much like the Viewport Filter "Normal map" in Mudbox. Can this be done? And I also want to make clear that I do not want to use "render to texture". I dont want to do any projection against an other mesh, I want to do it directly to the camera.
View 2 Replies View RelatedYesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
and I can fin nothing about this error anywhere on line.
Is it possible to render an object to fit exactly into the render window. i.e If I have a plane object segmented into 512 * 512 segments and I randomly colour each polygon. If I render at 512*512 pixels, I would like to fit the plane exactly so that the rendered image shows 1 pixel per polygon.
Whilst you can select region to render its not that exact and is based on the visual window. can it be utilized with render blowup.
Basically I want to render a square object exactly ( no borders) at a large resolution, hence the need for render blowup so that I can render into smaller tiles.
I can't render to a file. All options are gray for that function. All other rendering options are fine and work correctly.
View 7 Replies View RelatedI have a problem - when I try to render model to PDF (use DWG to PDF) result is weird and looks like this one:
But when I just render it (same quality settings) result is:
It's a school project and we have to make a layout and "plot" it using DWG to PDF.
How to render the attached drawing.
I have not drawn any 3d drawings before, so how to do it as you can see from my drawing it is not working. it looks better when i zoom in but not from a normal view ?
Its a simple raised flower bed with 2 boxes and a joining wall made of bricks, so I need to render it so the walls are brick with a hole in the boxes for dirt.