I am having a problem with output size when rendering. From Draft right through to presentation the output size is greyed out so I cannot change it. I've never had this problem before. Have I inadvertantly clicked on something which disables the output size?
View 9 RepliesI am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.
Lidar information that I am using to create surface can be found at URL.....
Using an HP 1050c Plus with the latest HP drivers for Windows XP on AutoCAD MEP 2009. If I use the standard printer margins it all works fine, except that the margins are way too big and no border we have will print without cutting off at least .25" all around. If I go to properties and change the margins to .1" all around, my 42x30 sheets will print out with 43" of paper. If I make them .25", I will get 42.5" of paper. I just started at this company and have never had this problem before with an HP 1050 plotter. I have tried different combinations of the Extend margins, Inked area and autorotate checkboxes but haven't been able to figure it out yet.
View 2 Replies View RelatedI would like my DVD output to fill more of my (be larger) TV screen. I am copying VHS tapes to DVD using Sony DvDirect. The DVD files are then imported into Video Studio Pro 4, edited, and then output to DVD. The input and output is 4:3 and frame size is 720 x 480. I can't set this to a larger frame size using any of the tools I've found. Is it the frame size I want to increase?
View 10 Replies View RelatedWhen I try to merge for example 3 fullsize jpgs ( 2304x3400 ) the resulting panorama is a file thet is only 1300 pixels wide ( although stitched correctly ). Seems strange to me as there are no options I know of the determine the output size.
Im on Mac ( Mac Mini with 1,2 gb of ram and CS3).
Usinf 3ds Max 2014 x64, I have seleceted an OUTPUT size of w1920, h1080. the finished movie comes out w720, h480.
View 9 Replies View RelatedI have a comic problem with 3ds max. I want to have a 500X500 size video from 3ds max. However 3ds max creates 720x480 size avi video. Example: if I select 500x500 output size, when play the resulting avi, its 720x480. I really couldn't solve the problem. Even I am typing 500x500 custom size into output size command. Am I missing a setting somewhere?
View 8 Replies View RelatedI hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies View RelatedI've been asked to do a poster A2 size 594mm x 420mm 300dpi but when i enter these dimensions my pc is slowing down dramatically. whats the best way to achieve better performance?
View 7 Replies View RelatedI'm using photoshop cs6 on windows 7.
Ok so my image size is about 24x20 and when I save the output of the image is almost half the size. The project has a lot of details so it looks like a big blob shrunken down to half size. I've played around with the settings for hours in save for web option and I get the same results. how to save so the output is nearly the original size, or just so you can see the details!
I do a lot of animations so I create FG maps and freeze them. I normally render at 1280 x 720 and create my FG maps at 480 x 270 and samples per pixel at min 4 max 64.
Does samples per pixel effect FG maps. I read somewhere it doesn't and that you can quite happily render FG maps at min 1/64 max 1/64. Which would increase the speed of the crateing FG maps.
Would I be better lowering my samples per pixel and highering my output size?
I'm usually in a constant battle with flickering especially with folaige
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedIs there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
I upgraded from VS 12 into VS Pro X5 Ultimate a while ago and now I have some issues in editing some old footage taken with Sony H9 camera. This camera makes 640*480 30 frames/s Mpeg-1 video files.
After editing the movie, I would like to export it into 640*480 30 frames/s Mpeg-2 file as I used to be able to do with VS 12 (in the old Win-XP machine, current one is Win-7 64-bit). Now however, the VS X5 does not give me the option in 'Create Video File' to set 'User-defined' frame size.
It only lists under MPEG-files -> Options: standard 720 x 576 (yes I am on PAL region) and 25 frames/s. Why is this? The only encoder shown is 'Ulead MPEG.Now Encoder'. Maybe I had some other encoder available in the Win-XP machine?
I have been searching for Win-7 MPEG-2 encoder, but no luck.
How to get user-defined frame-size and rates under MPEG-2 encoder in VS PRO X5 ???
I am making a holiday greeting card. I have 16 very larged photo images "linked" (not embedded) into the card. The original images are very large (e.g. 4500 x 3000 px, 10mb) but I've placed them fairly small in the final card (only about 2" x 2" printed). Therefore, I likely don't need the full resolution of the original photos. I need to generate a final file that I can send to an online print shop, something that is ideally 10-25Mb in size, probably pdf. How to prepare the final file for export to pdf to generate as such? Right now, the final file is 275Mb because it is embedding the full size of each of the 16 images.
I'm on Illustrator CS6 on Mac.
Edits look nice in size such as fit screen, but awful in the larger views. Instructions have been to view edits at 100% but what size=what % view of what one would see the picture once it is viewed on a computer, figuring that people will not enlarge too terribly much.
View 1 Replies View RelatedI'm editing a storyboard with music in the timeline panel. I work in a studio and don't want to disturb everyone by repeating the same part of a track over and over while I work. So, I plug my headphones in BUT...sound keeps coming out of my display (even though I can hear the audio up/down "blip blip" in my headphones when I adjust volume). Searched preferences but there is NO mention of any way to edit the audio output.
View 4 Replies View RelatedWhen first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
I set up a sequence that is HD, but I have source material that is 2K (2560x1440). When I try to insert or overwrite said source clip to the sequence, it should insert and automatically add a resize node. Instead, it changes the sequence size to match the source size. Bug?
Also, I can't seem to find a way to resize the output of my connectFX node to match the sequence size. For example, lets say I want to comp a bunch of shots that are 2K in action, and then output an HD sequence matching my sequence size. How is this done? I have changed the comp size in action and linked that to the connectfx node, but it just puts the smaller comp size in a black box which is the size of the source material (in this case, 2K).
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
I am creating colage images in Photoshop CS4. I sometimes use scanned vintage daguerreotypes or other small snapshots. They are often small sized at 3.5" x 4.5" or 4.25" x 5.5". My Epson 835 scanner can scan in at 300, 400, up to 800 dpi. If I intend to print these scans at 8x10, 11x14 or a larger size within the overall collage, should I scan in at the highest dpi allowed by my scanner? Does this make a real difference after 300 in resolution/clarity?
Also, Does Photoshop CS4, in the enlarging process, as I bring the smaller image into my composite and stretch size it up with (T) tool, end up just making "junk pixels" using "Bicubic" or "Bicubic smoother" in the printing from flattened PS file, even tho I scanned in at a high dpi? scan in at best dpi so that the image won't be pixelated, lose resolution as it is used larger inside the final composite collage.
We do hundreds of images for our main client for print purposes. As part of the work, they want all of the final images run through Save for Web saved as both a .jpg and .png file at 1000 pixels wide.
The problem is, if you try to create an action for this, the size the action saves is a percentage and not a pixel width. So it's impossible (so it seems) to save an action that sets the scale as a proportional resize with a fixed output of 1000 pixels wide. Since all of the images vary in size and it insists on saving the size as a percentage, you can't create an action that will work.
I've tried to see if there's a way to modify the action to change the output to a pixel width, but can't see how to do it. Is this even possible? It would save us TONS of work not having to manually open each image twice and saving for each format.
How do I change the mode settings in output from composite to separations?
View 3 Replies View RelatedI create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies View RelatedThe feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedI changed my aperture size but for some reason it didn't take. it is still small. Even if I go back into options it shows the larger size but doesn't take affect. Of by the way the Autosnap marker size got larger.
View 4 Replies View RelatedWhen I open a new file in AutoCAD 2011 the size is 1:100 how can I change it to 1:1 ?
View 4 Replies View RelatedI have exported one point file from arc gis software to autocad. It is opening in autocad but I 'am not able to change the size of those points. Though I can change the color. I also created a small symbol and tried to match it by using MA option but it is not of any use.
View 2 Replies View RelatedHow do you change your paper size? I'm not given the option in the drop down box:
Page Setup - 0.jpg
I am in inventor and I need to draft up some diagrams for a lab report for school. They all have to be to scale so my dimensions will work properly, the only problem is, when I want to take a screenshot of the image to put into my document, the dimensions are way too **** small. I have tried everything to change them and nothing has worked. I don't know where my command line window is so I can't go directly to dimstyles.
View 3 Replies View RelatedI have a question about the revision tag. It's seam that we can not change the size of the balloon or Triangle. But we can use a user symbol. But we can make this choice only after placing the tag. see picture.
My question is : It is possible to make this choice in the stylelibrary ?