Photoshop :: How To Change Audio Output In CS6
May 16, 2013
I'm editing a storyboard with music in the timeline panel. I work in a studio and don't want to disturb everyone by repeating the same part of a track over and over while I work. So, I plug my headphones in BUT...sound keeps coming out of my display (even though I can hear the audio up/down "blip blip" in my headphones when I adjust volume). Searched preferences but there is NO mention of any way to edit the audio output.
View 4 Replies
ADVERTISEMENT
Oct 15, 2013
I've had an issue over the last couple weeks with Ae CC where any time I output to uncompressed (audio) codec, no audio is attached. I've verified that my output module was set to Audio Output On. Bringing the file into Pr or back into Ae shows that there is no audio track, even though the setting should have at least made a silent audio track. This happens regardless of the audio format in my composition (.wav, .aif, .mp3), and seems to only occur with uncompressed codec.
Ae CC v12.0.0.404
Windows 7 64-bit
View 1 Replies
View Related
Jan 28, 2013
We do hundreds of images for our main client for print purposes. As part of the work, they want all of the final images run through Save for Web saved as both a .jpg and .png file at 1000 pixels wide.
The problem is, if you try to create an action for this, the size the action saves is a percentage and not a pixel width. So it's impossible (so it seems) to save an action that sets the scale as a proportional resize with a fixed output of 1000 pixels wide. Since all of the images vary in size and it insists on saving the size as a percentage, you can't create an action that will work.
I've tried to see if there's a way to modify the action to change the output to a pixel width, but can't see how to do it. Is this even possible? It would save us TONS of work not having to manually open each image twice and saving for each format.
View 21 Replies
View Related
Jun 28, 2011
I am having a problem with output size when rendering. From Draft right through to presentation the output size is greyed out so I cannot change it. I've never had this problem before. Have I inadvertantly clicked on something which disables the output size?
View 9 Replies
View Related
Jul 15, 2013
How do I change the mode settings in output from composite to separations?
View 3 Replies
View Related
Nov 28, 2013
I hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies
View Related
Jul 21, 2011
i was told by a friend that i could change the audio settings from mono to stereo but i'm not sure how to change it?
View 1 Replies
View Related
Mar 10, 2013
In ULead VideoStudio is very easy, because I connect the Easy cap but I want to change the audio input by the Orange Input (Is connected the audio from the video of easycap, because the easycap Audio do not appear in recording devices to change the volume, because is too high).
Is Ulead VideoStudio SE is easy:
But in Corel Video Studio x2 x5 I can't change the audio input, only is the easycap audio input, but I want to change to the orange input.
View 9 Replies
View Related
Sep 24, 2013
Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
View 3 Replies
View Related
Jan 10, 2012
I have been trying to change my audio input when capturing and i cannot seem to find a way to do this. I am using a logitech usb microphone or a plantronics one, however i cannot change it. It has it checked and grayed out, why isn't this an option?
View 2 Replies
View Related
Sep 19, 2013
where i cant see the opacity( you know like 100% and so on) its the same with audio level, position, scale etc. here's a print screen of it [URL]
The reson why it dissapeared is because when i pressed L-L on my keyboard to show the audio waves, but instead i must have pressed something wrong or maybe the layer the layer want selected.
View 6 Replies
View Related
May 20, 2013
I have completed a slide show and added 3 songs. The songs are showing up on the audio bar at the bottom, but when I do full-screen preview there is no audio. My speakers are working fine, i'm able to play songs from other programs. I am working in PS Elements 9 on Windows 7.
And another question, if i want to burn the slide show onto a DVD - what type should I buy?
View 4 Replies
View Related
Sep 20, 2011
I know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Dec 24, 2013
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies
View Related
Aug 15, 2013
I've some problems with Adobe Brigde, it's the first time using that an I wanna export some photos but I don't have the tool Output or extract (I don't know the excatlly name in English, I'm working with the french version).
I tried with Ctrl+K ->bootscript but I cannot find the Output took inside.
Another problem with Adobe Extention Manager CC, it's impossible to install new extention, I rode the tutorial but it doesn't work, I want to install some brush for exemple.
View 12 Replies
View Related
Aug 28, 2007
What settings do I have wrong that I see certain colours in PS, then either 'Save as', a jpg (for web use).. Or even 'Save for web'..
And when I compared the colours to PS, they are different?
Usually more red/magenta in jpg format.
View 7 Replies
View Related
May 17, 2006
I have been told my a printhouse that my designs in photoshop need to be submitted as vectors and saved as an .eps file. So I saved my psd design as an eps file but they said that it wasn't correct.
I have since been informed by them that I need to my pixel graphics into curves, even the text. They suggested that CorelTrace would be able to trace my design with curves. Is there any way that this can be done in CS2? The design is quite simple, a few stripes and some text.
View 9 Replies
View Related
Jul 15, 2006
So anyways im runing the New Photoshop. i was working on an image a while ago and bla bla.. I go to save as .jpg and for some reason the photo comes out Much more contrasted then it actualy looks like in photoshop.
like wayyy too much, like its geting kind of anoying because its not the picture i made it to be. it used to work fine before. what should i do.
View 1 Replies
View Related
May 8, 2009
could i get a broadcast video output in Photoshop CS4.I would to check colors on a PAL monitor,
View 1 Replies
View Related
Jan 3, 2007
way i can get photoshop to put out xml and icon files along with my psd files? I want to make my own photo lithos but can figure out how to out put it.
View 1 Replies
View Related
May 25, 2005
I have a sliced image, which i'm trying to "save for web" using JPG format for all slices, but when i select the JPG settings (these in right) it outputs as a JPG only one of the slices, and everything else is GIF?! If i select all slices one by one and set them to save as JPG, it will work, but that's just too much slices, and i think there should be better way?
View 4 Replies
View Related
Oct 25, 2012
I have been successfully printing images from CS3 on an Epson 3880. Now that I have had to upgrade to CS6, I have a big problem. In CS3 When I went Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider down to brighten the image. I can't find Output in CS6! Since choosing Photoshop Manages Colors turns off the printer's color etc controls,
View 2 Replies
View Related
Jul 18, 2012
I'm using CS4 and am trying to make an animated GIF. I've got it all set up and when I play it in Photoshop everything is fine. I then go to File > Save for web and then choose GIF in the dialog box and leave all other boxes alone. In the Optimized window my images are missing and only a grey box is shown. When I hit Save and then open the resulting GIF in a browser, all I get is that grey box and not the animation with my 8 frames.
View 5 Replies
View Related
Jul 16, 2013
We were talking a while back, about the apparent demise of the Output Module in Bridge CC. In case this slipped you by, John Nack blogged this info a couple of days ago: URL....
View 3 Replies
View Related
Feb 26, 2013
I just bought an Epson WF-7520. When try to print out a 13 x 19" image it stretches it by 1/4" in height and 1/2" in length. It's a case of what see it NOT what get. Epson couldn't favor.
View 3 Replies
View Related
Sep 29, 2013
At the core of it all: "images from PSD exported as a .png, or a .jpg (commonly for me) do not show the same...contrast or fidelity my photoshop-canvas shows me..
I have been working on some stuff, and quite some time ago, I noticed that a certain piece of mine was not showing the subtle, noise-fog that I had added in PSD.Now, on-canvas everything seemed fine and I thought: "Okay, This is what I want." However, when I saved the image (as a .jpg and later as a .png as well), the fog was absent from the image, showing simply a "black" background. Sometime later I found that, when I zoomed in, the noise was actually present, it was just VERY unclear. You could only notice it, just barely, whilst zoomed in.
Now we come to present-time. I'm working on a little concept. It's in manga cell-shaded style, so the differences in color are easy to see (as shadows, for example, are not gradual. There's a clear line that separates the normal lighting from shadows)
Now, this 'character' has a black pair of pants (specific RGB- #100d11) and the color of the shadow is #060506..The thing is: in photoshop, I can clearly see the difference and it looks the way I want to have it. But when I saved the image to jpg (and to png) you can barely, if at all, see the difference. Someone who does not know there are two different colors, would not see it, and just see pure black. You can see the difference if you zoom-in, but even then it's not as 'stark' as it is on-canvas.
- Is this common / normal?- If yes, is there something to fix this, so that what I see on-screen is what I get when I export the file?
View 8 Replies
View Related
Sep 16, 2007
I am relatively new to the digital imaging community. Reason I am here is I am looking for a image management or digital imaging software that will allow me to create my own web gallery that I can style and tailor myself and also be able to assign keywords to images in the application.
However, as I will be uploading a large collection of images I will need a search mechanism or the ability to upload the metadata, i.e the keywords for each image. So I will be able to find certain images I am interested in viewing, effectively and efficiently.
Do any of you guys know of any application that will do all these things?
I trust alot of you are very knowledgable in this area and probably professionals, I was wondering if anybody could give me a hand?
View 1 Replies
View Related
Jan 31, 2009
So here's what I'm trying to do. I'm working on something that requires two layers. In in one layer I'm supposed to draw something using the lasso tool, and then afterwards go to the other layer and change the upper output level. Unfortunately, it's not working for me and no levels are changing. This process works when I use the line tool to draw in the first layer but not when I switch to the lasso tool.
View 9 Replies
View Related
Nov 7, 2008
I am looking to upgrade Photoshop from Vers. 7, and have already been informed that v.7 is too old to upgrade to CS4. Can someone tell me what the latest version of Photoshop I CAN upgrade to from v.7, AND - (this is the most important part) does that version feature .CSS code output (as opposed to table output).
View 9 Replies
View Related
Sep 2, 2004
I am going to get some flack but I bought a template to work with in psd format. I was told that I could jut open it in photoshop, make the changes to the layers, save it using the "save for the web" feature, and it would output the seperate images into an images folder that I could use in relation to my HTML pages. HOWEVER, I am just getting one huge pictures!
View 3 Replies
View Related
