What settings do I have wrong that I see certain colours in PS, then either 'Save as', a jpg (for web use).. Or even 'Save for web'..
And when I compared the colours to PS, they are different?
Usually more red/magenta in jpg format.
I have recently traced a new picture and I am about to add colors to it so that I can upload it later on my gallery. I started the Tracing on a Cmyk based template because one day I will use print it to add it to my portfolio! I mean should I add Cmyk colors and them convert them to rgb in order to upload it?
View 7 Replies View RelatedI recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1
Layer 2 = Color 15
Layer 3 = Color 10
Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.
Using CS6 on a MacBookPro Is there a way to find the closest matching Pantone spot colors to the cmyk colors I've created in Illustrator? I know it's easy in Photoshop using the color picker, but there must be a way to do this in Illustrator.
View 4 Replies View RelatedYou can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
I've some problems with Adobe Brigde, it's the first time using that an I wanna export some photos but I don't have the tool Output or extract (I don't know the excatlly name in English, I'm working with the french version).
I tried with Ctrl+K ->bootscript but I cannot find the Output took inside.
Another problem with Adobe Extention Manager CC, it's impossible to install new extention, I rode the tutorial but it doesn't work, I want to install some brush for exemple.
I have been told my a printhouse that my designs in photoshop need to be submitted as vectors and saved as an .eps file. So I saved my psd design as an eps file but they said that it wasn't correct.
I have since been informed by them that I need to my pixel graphics into curves, even the text. They suggested that CorelTrace would be able to trace my design with curves. Is there any way that this can be done in CS2? The design is quite simple, a few stripes and some text.
So anyways im runing the New Photoshop. i was working on an image a while ago and bla bla.. I go to save as .jpg and for some reason the photo comes out Much more contrasted then it actualy looks like in photoshop.
like wayyy too much, like its geting kind of anoying because its not the picture i made it to be. it used to work fine before. what should i do.
could i get a broadcast video output in Photoshop CS4.I would to check colors on a PAL monitor,
View 1 Replies View Relatedway i can get photoshop to put out xml and icon files along with my psd files? I want to make my own photo lithos but can figure out how to out put it.
View 1 Replies View RelatedI have a sliced image, which i'm trying to "save for web" using JPG format for all slices, but when i select the JPG settings (these in right) it outputs as a JPG only one of the slices, and everything else is GIF?! If i select all slices one by one and set them to save as JPG, it will work, but that's just too much slices, and i think there should be better way?
View 4 Replies View RelatedI'm editing a storyboard with music in the timeline panel. I work in a studio and don't want to disturb everyone by repeating the same part of a track over and over while I work. So, I plug my headphones in BUT...sound keeps coming out of my display (even though I can hear the audio up/down "blip blip" in my headphones when I adjust volume). Searched preferences but there is NO mention of any way to edit the audio output.
View 4 Replies View RelatedI have been successfully printing images from CS3 on an Epson 3880. Now that I have had to upgrade to CS6, I have a big problem. In CS3 When I went Print-> Photoshop Manages Colors to choose an ICC color profile, there would be a companion Output box, where I could drag the Transfer slider down to brighten the image. I can't find Output in CS6! Since choosing Photoshop Manages Colors turns off the printer's color etc controls,
View 2 Replies View RelatedI'm using CS4 and am trying to make an animated GIF. I've got it all set up and when I play it in Photoshop everything is fine. I then go to File > Save for web and then choose GIF in the dialog box and leave all other boxes alone. In the Optimized window my images are missing and only a grey box is shown. When I hit Save and then open the resulting GIF in a browser, all I get is that grey box and not the animation with my 8 frames.
View 5 Replies View RelatedWe were talking a while back, about the apparent demise of the Output Module in Bridge CC. In case this slipped you by, John Nack blogged this info a couple of days ago: URL....
View 3 Replies View RelatedI just bought an Epson WF-7520. When try to print out a 13 x 19" image it stretches it by 1/4" in height and 1/2" in length. It's a case of what see it NOT what get. Epson couldn't favor.
View 3 Replies View RelatedAt the core of it all: "images from PSD exported as a .png, or a .jpg (commonly for me) do not show the same...contrast or fidelity my photoshop-canvas shows me..
I have been working on some stuff, and quite some time ago, I noticed that a certain piece of mine was not showing the subtle, noise-fog that I had added in PSD.Now, on-canvas everything seemed fine and I thought: "Okay, This is what I want." However, when I saved the image (as a .jpg and later as a .png as well), the fog was absent from the image, showing simply a "black" background. Sometime later I found that, when I zoomed in, the noise was actually present, it was just VERY unclear. You could only notice it, just barely, whilst zoomed in.
Now we come to present-time. I'm working on a little concept. It's in manga cell-shaded style, so the differences in color are easy to see (as shadows, for example, are not gradual. There's a clear line that separates the normal lighting from shadows)
Now, this 'character' has a black pair of pants (specific RGB- #100d11) and the color of the shadow is #060506..The thing is: in photoshop, I can clearly see the difference and it looks the way I want to have it. But when I saved the image to jpg (and to png) you can barely, if at all, see the difference. Someone who does not know there are two different colors, would not see it, and just see pure black. You can see the difference if you zoom-in, but even then it's not as 'stark' as it is on-canvas.
- Is this common / normal?- If yes, is there something to fix this, so that what I see on-screen is what I get when I export the file?
I am relatively new to the digital imaging community. Reason I am here is I am looking for a image management or digital imaging software that will allow me to create my own web gallery that I can style and tailor myself and also be able to assign keywords to images in the application.
However, as I will be uploading a large collection of images I will need a search mechanism or the ability to upload the metadata, i.e the keywords for each image. So I will be able to find certain images I am interested in viewing, effectively and efficiently.
Do any of you guys know of any application that will do all these things?
I trust alot of you are very knowledgable in this area and probably professionals, I was wondering if anybody could give me a hand?
So here's what I'm trying to do. I'm working on something that requires two layers. In in one layer I'm supposed to draw something using the lasso tool, and then afterwards go to the other layer and change the upper output level. Unfortunately, it's not working for me and no levels are changing. This process works when I use the line tool to draw in the first layer but not when I switch to the lasso tool.
View 9 Replies View RelatedI am looking to upgrade Photoshop from Vers. 7, and have already been informed that v.7 is too old to upgrade to CS4. Can someone tell me what the latest version of Photoshop I CAN upgrade to from v.7, AND - (this is the most important part) does that version feature .CSS code output (as opposed to table output).
View 9 Replies View RelatedI am going to get some flack but I bought a template to work with in psd format. I was told that I could jut open it in photoshop, make the changes to the layers, save it using the "save for the web" feature, and it would output the seperate images into an images folder that I could use in relation to my HTML pages. HOWEVER, I am just getting one huge pictures!
View 3 Replies View Relatedi'm using a canon BJC-210 SP bubble jet printer. i try to print a colored image. the output wasn't the same as the original image. try to fix it in the printer prerferences but to no avail. the image is in jpg. format at 100% resolution.
View 7 Replies View RelatedI'm using Photoshop CS version 8.0 for Mac and never noticed this before, but when I print on my Epson 2200 an image that I have made into a picture package from photoshop, it is a different color that when I print directly from the .jpg image without creating a picture package first (because it is an 8x10 and I don't need to use the software for that). Is it because my Picture Package creates it as a .psd and not a .jpg?
View 1 Replies View RelatedWhen I run Image Processor, I tell the files to go to a specific folder. All of the processed images go to a folder named JPEG in the folder I specified. But, it also creates another copy of each image on my desktop which means a lot of cleanup after running 100 images. Anybody know how to stop that?
View 3 Replies View RelatedCan Adobe Photoshop CS4 create seamless panoramas and output virtual reality Quicktime (or other format) "movies?"
I will capture a scene using a QVTR tripod head and use exposure bracketing to make sure the scene is captured in HDR quality.
I want to end up with an interactive product that is ready to be inserted into a web-page.
(I have CS2 and would upgrade for that capability.)
If CS4 can't do this, please suggest software that can.
I think my current version (CS2) can do the assembling. But, I'm not sure about the seamless edge. I know that CS2 cannot create the output that I want.
When I try to merge for example 3 fullsize jpgs ( 2304x3400 ) the resulting panorama is a file thet is only 1300 pixels wide ( although stitched correctly ). Seems strange to me as there are no options I know of the determine the output size.
Im on Mac ( Mac Mini with 1,2 gb of ram and CS3).