I am trying to make 2 different size cirlces into to on Solid object. One circle is 20 in diameter and the other is 50 in diameter. I was wondering what the command was.
View 3 Replieswhen I create a shape and fill it in for a colour ( so I can send it to a screen printer to be put on our product ), I get an issue with DN-P-2726.dwg. I was trying to recreate the part being painted red, so the screen printer overlays with the black and grey.
View 7 Replies View Relatedconnecting two circles with different diameter into a solid. I tried loft, but it is a partial solution since it creates a surface. I know there is a solid option. There surely is a way and a simple one but i don't know how. Bellow there is a picture with diameters and length of the mast. Also i included a dwg file. Not much done there.
View 9 Replies View RelatedI am trying to create a custom linetype with solid circles at a specified distance along the custom linetype (see attachment). I have tried using a shape, the special Wingding character but cannot get the result I want. I've tried the hatching method, again with no luck. I've went through the discussion groups, online content, etc. but cannot get it to generate the line the way I want. I see a few people that have been successful but I cannot get it to work.
View 9 Replies View RelatedI am trying to create pre-determined sized round graphics for a project that wil be printed out as a sheet & cut for use.
I can get the images to the circle shape, no problem...but the issue is determining the correct size of the circles to be cut. Let's say that I need them to be exactly 1.25", 1"...etc.
Is there a way to create a template sheet of such sizes, then apply the images to be cropped to those pre-determined sizes?
Unfortunately I do not have Illustrator, but I suppose I could open the images in CorelDraw to accomplish this. Haven't tried it yet.
Just wondering if there is a way to do this in Photoshop!
I am trying to use the tool for drawing a filled-in circle with a colored border to add a series of circles to a map for use in identifying specific stops on a tour. I cannot, to save my life, figure out how to designate the size of the circles. Instead, the only thing I can figure out to do is use my mouse to click, hold, and drag until the pixel dimensions on the screen show exactly the size I am aiming for.
The problem is that I am trying to hit exactly 30x30 pixels. Either my hand is not steady enough or the mouse is too sensitive, but it is taking forever to try to hit precisely the right size. Is there any way to simply click the point where I would normally begin dragging to draw the circle and then just type in the dimensions on my keyboard?
On the bottom of this page, there is a script to select objects based on fill color.
so that it deselects the circles of 1mm in diameter?
I have a group of objects and 1mm circles and I wish to export all but those circles.So I select the group and then I need to start some script that will cyclethrough all selected objects, check if it is a circle of 1mm in diameter - and deselect it.
Any way to change the size of the circles that I made so that they all enlarge yet keep their respected positions. So for the example below, I would like to just enlarge the circles and not the rest. If I select all the circles and drag them to enlarge, they lose their position. Is there a way to do this? This script [URL] ...... doesn't work for x6 but I think it is what I might need, correct?
View 4 Replies View RelatedI'm trying to make a logo. Circular logo with an inner ring maybe 4 px wide and 15 px inside the rim of the outer circle.
Basically I want a blue circle with a yellow inside ring. What's the best way of doing this? The only thing i can think of is: creating a blue circle marquee, and then another (trying to estimate a new circle size and change the color) that is yellow, and then making another smaller blue circle inside the new one. That's just ugly.
I tried the edit/stroke but that just gave me a stroke around the outer circle; it didn't put a ring inside the circle 15 px down.
Also I tried to contract the original circle by selecting it, then Modify/contract. That's got me a selected ring, inside the circle. Now how in the world do I make that little ring yellow? It just remains selected and I can't seem to find a way to color it.
I have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies View RelatedWe have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedHow can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedIs there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedI am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedI want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View RelatedHow can i convert some solid bodies to a single solid.
View 8 Replies View RelatedI appear to have two red circle which I did not create on drawing in model space. I am assuming it is some sort of error but can not figure it out. On my layout tab viewports containing the section does not show, only the red circle.
View 6 Replies View RelatedI have a drawing that has a heap of circle that have two on top of each other. Overkill works for lines and arcs, but I can't seem to get it to work for circles. Is there another way to get rid of one of the circles? We will be using the file in CAM software so two on top of each other is a pain.
View 4 Replies View RelatedWhen a co-worker is trying to hatch using pick point, multiple red circles start appearing and choke up the program. He is not even picking inside the area where these gap indication circles are appearing. I have had him adjust the hatch gap tolerance but am wondering if I can turn off this behavior entirely?
View 4 Replies View RelatedTwo circles have appeared on my drawing, I cant select them to get rid of them, they scale differently to the rest of the drawing when I zoom, i.e. I zoom out and the get large, I zoom right in and they are small. Where did they come from and more importantly how can I get rid of them?
View 2 Replies View RelatedIs it possible to put a center mark on multiple circles instead of one at a time?
View 9 Replies View RelatedThere are large x's coming form the center of the circles of an object that I am pasting into a drg, why does this happen?
View 2 Replies View RelatedTrying to create a multileader callout that doesn't have a landing and the leader axis passes through the center of the ballon circle and not the side. Most the CAD applications I have worked with don't use leaders with "Landings".
View 3 Replies View RelatedA program that will show vehicle paths once start and end locations of vehicles are entered?
I have a restricted area and wish to know if a vehicle will be able to turn around in this area.
Im having a little issue with connecting lines and circles but not sure how to shorten the question to do a search on here. I have 2 concentric circles (the two circles form the walls of a round tower wall) which have 2 lines (representing a wall) passing through them. I want to join the circles from the circumference to the lines, but each time I try to do it the line seems to default to the center of the circles and to the endpoints of the lines which is not what I want. The eventual aim will be to remove a section of the circles and the lines where the new line connects to them to form an opening in the walls.
Ive tried <shift>right click and selecting tangent on the circles but I cant figure out what to do on the lines and it constantly defaults to the end of the line not to where I want to intersect the lines.
I'm trying to loft a profile between 3 circles and i have created 2 2d spline guides to loft through (see picture).
I get an error when i select the two splines as guides which says
"Modeling Operation Error:
The guide is not G1 between first and last sections. The selected entities are not valid"
The guides are definitely touching the profile edges so I'm not sure what the problem is.