On the bottom of this page, there is a script to select objects based on fill color.
so that it deselects the circles of 1mm in diameter?
I have a group of objects and 1mm circles and I wish to export all but those circles.So I select the group and then I need to start some script that will cyclethrough all selected objects, check if it is a circle of 1mm in diameter - and deselect it.
Any way to change the size of the circles that I made so that they all enlarge yet keep their respected positions. So for the example below, I would like to just enlarge the circles and not the rest. If I select all the circles and drag them to enlarge, they lose their position. Is there a way to do this? This script [URL] ...... doesn't work for x6 but I think it is what I might need, correct?
View 4 Replies View RelatedI used to be able to deselect an object by simply pressing the Esc key but I can't seem to figure out how to make X6 do this. I think its been set up that way as default on previous versions.
View 4 Replies View RelatedDraw a rectangle. Record macro
use the interactive contour to create an inline. Cntrl+k (break apart). It works but leaves both selected. Now what I need it to do is deselect the outer rectangle leaving me with just the inner one still selected.
I am trying to create pre-determined sized round graphics for a project that wil be printed out as a sheet & cut for use.
I can get the images to the circle shape, no problem...but the issue is determining the correct size of the circles to be cut. Let's say that I need them to be exactly 1.25", 1"...etc.
Is there a way to create a template sheet of such sizes, then apply the images to be cropped to those pre-determined sizes?
Unfortunately I do not have Illustrator, but I suppose I could open the images in CorelDraw to accomplish this. Haven't tried it yet.
Just wondering if there is a way to do this in Photoshop!
I am trying to make 2 different size cirlces into to on Solid object. One circle is 20 in diameter and the other is 50 in diameter. I was wondering what the command was.
View 3 Replies View RelatedI am trying to use the tool for drawing a filled-in circle with a colored border to add a series of circles to a map for use in identifying specific stops on a tour. I cannot, to save my life, figure out how to designate the size of the circles. Instead, the only thing I can figure out to do is use my mouse to click, hold, and drag until the pixel dimensions on the screen show exactly the size I am aiming for.
The problem is that I am trying to hit exactly 30x30 pixels. Either my hand is not steady enough or the mouse is too sensitive, but it is taking forever to try to hit precisely the right size. Is there any way to simply click the point where I would normally begin dragging to draw the circle and then just type in the dimensions on my keyboard?
Infinite circles.cdr
As attached really.
I need it so they all overlap in the same direction.
I create macro button for two circles.if we click that button a guidelines create the center of both these circles. i have new in coreldraw VBA.
View 2 Replies View RelatedI have a quick question corel X5, I have a design made of several .4 inch circles, I wonder if there is a way to resize all the circles to .6 inch ( i am trying to avoid to resize manually each circle )
View 14 Replies View RelatedI've got the basics, but how do you color in the different overlaps of the circles?
View 2 Replies View RelatedHow can I resize multiple (236) circles about their own centerpoints without resizing them each by each?
I´dd like to increase radius about 2-5%.
I'm trying to create dotted lines that are actually circles and not square shaped dots (the given option in the outline menu). Is the best/only way to do this by creating a new Artistic Media Brush? It seems like there should be an easier option when needing to create a long dotted line or a shape with a dotted outline.
View 14 Replies View RelatedI'm currently sitting with the following problem in CorelDraw 11:
I have four circles, one inside the other, with the circles getting smaller towards the centre. I want the two outer circles to be joined and the two inner circles to be joined. Text will be placed on top of these circles and I want to cut out those sections of the circle which will be covered by the text. The circles will also be filled with different colours. Simply placing the text on top of the 'rings' is not an option as the there are also two logos on the right which cover part of the circle (the part which I want to 'cut' out).
I've tried Combine and the Knife tool but somehow I just don't seem to achieve my goal. This would be a lot easier to explain if I could upload a PDF of the image.
I'm trying to make a logo. Circular logo with an inner ring maybe 4 px wide and 15 px inside the rim of the outer circle.
Basically I want a blue circle with a yellow inside ring. What's the best way of doing this? The only thing i can think of is: creating a blue circle marquee, and then another (trying to estimate a new circle size and change the color) that is yellow, and then making another smaller blue circle inside the new one. That's just ugly.
I tried the edit/stroke but that just gave me a stroke around the outer circle; it didn't put a ring inside the circle 15 px down.
Also I tried to contract the original circle by selecting it, then Modify/contract. That's got me a selected ring, inside the circle. Now how in the world do I make that little ring yellow? It just remains selected and I can't seem to find a way to color it.
I am trying to figure out how I can rotate many different circles (could really be any shape) aound a single point? For example, say I have 10 identically sized circles and want to rotate each one tangent to a single point every 36 degrees. Hopefully I am making sense and explaining the situation correctly. Is there a quick method using CorelDraw's tools/features to accomplish this task?
View 14 Replies View RelatedI have two adjacent circles. I created two tangent lines between them on opposite sides. I want to connect the lines to the circles. So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.
Before I start this, the lines are perfectly tangent. When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line. I can see a difference at 3200% and 11000% zoom at 0.5 point lines.
This occurs if I rotate the circle, or make the circle into an arc also.
It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center. This is happening when I manually rotate it. It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine. For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies View RelatedI really can't believe that it is not possible in Corel Draw.
1) How to define size of object, for example rectangle before I actually draw first time the custom shape of the rectangle? So far I draw any rectangle and then change the size which is not professional way I guess, because it causes many problems. (like for example I cant change ratioif it is going to be rectangle with rounded corners)
2) Very often in my work I need to change % size of my artwork or object because a client wants to have something 80% size or 20% smaller. I found it impossible to do because CorelDraw keeps remember all % transformations since original size was created. Now, provided that my 1) problem has no solution we end up in such a situation:
- my first rectangle is always NOT in correct, precise size
- when I amend the size it has a correct size but already has different than 100% value.
- Corel Draw forces me to choose: 100% value and not precise size or correct size and for example 113,9%
I completely don't understand what for is the feature that remembers the original size, it's not so needed in practice especially that IT IS A VALUE BASED ON ALWAYS WRONG INITIAL SIZE. Is it so difficult to place a button next to % value called RESET to 100%? (without going back to initial size of course) I know there are tricks for exampleto group the object temporary with other object but it is not a proper way, is it?
Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
We are having an odd behavior in Illustrator CS4 in our office. Multiple users try to deselect objects by clicking in blank space, but the last object still appears as if it is selected onscreen. When they select another object (without holding SHIFT), it looks as if the old object AND the new object are selected...but when they delete or otherwise manipulate the newly selected object, it only affects that particular object and does not alter the old object that appeared to also be selected. Although the actual functionality is correct, it is extremely distracting and annoying because it looks like they have more objects selected than they actually do...and they can never really tell what's what!
For one user, this happens frequently when selecting objects with clipping masks. For another, it happens when simply using the selection tool on any old object. All users on Mac Leopard 10.5.5. Aside from resetting preferences which I've had one of the users do.
When I select an area in Photoshop CS6, I can no longer deselect by clicking outside the area. My tool tip displays the cross with the plus sign in the lower right to indicate I am in additive mode. I can right click for a dropdown menu and choose "deselect" , but that is a drag that interrupts my thought flow and so annoys me.
I've tried going into preferences and making sure the cursor is "standard." I've reset my preferences. No caps locked, etc. What is going on? More importantly, how can I make it so that all I have to do is click outside the selection to deselect it. I'm working on a Mac, if that makes any difference.
I feel really dumb right now but for some reason I'm having trouble deselecting. First off, I'm talking layers and vector objects here. I know Cmd D deselects selections. But how you do deselect any layer which might currently be active? I'm working in PS CS6 for the first real time and it's like I suddenly got dumb or something.
I know you can select a blank area of the Layers Panel to do it, but my Layers Panel is full right now, so I don't even see any dead space. This is especially troubling because I'm making a lot of shape layers and if I do that while a layer is selected then I wind up making masks.
I'm having a hard time figuring out how to deselect part of an image. When I use the magic wand to select the white background it includes part of the thumb nail. How do I deselect the white part of the thumb nail so I don't remove it with the background?
View 6 Replies View RelatedHow do I return to non animated text after changing my mind and not wanting to use a previously selected preset.
View 1 Replies View RelatedGreat Site! Hi!
CS2 / WindowsXP - Usually when I DESELECT an image (the marching ants) by keys CONTROL-D, or by right-clicking the drop down DESELECT, isn't there another way to DESELECT by...
... just r-clicking away from the image using the mouse to deselect the marching ants? I'm drawing a blank and I have tons of copy, pasting to do, and my right hand is getting very, very tired. I'm sure I used this function before, I just forgot how to enable this function.
I have been to the EDIT> KEYBOARD SHORTCUTS and PREFERENCES, but nowhere can I find this.
Am I tripping, or is there a way to actually do this?
I can't seem to figure out why I keep copying a path when I'm selecting a layer and using the magic wand tool. Each time I copy and paste, I paste the path instead of the selected layer. How do I unselect the path so that I can copy my selection properly?
View 3 Replies View Relatednot be able to go on to something else in a project because I have lines trailing behind my cursor, forcing me to use the undo key or to choose a different, less intrusive tool. Small problem I know, but this has kept me stuck for two days. I did find an answer for an older version that involved about 4 or 5 steps, which I found incredulous, since all I have to do is click once to select a tool. Anyway, the instructions didn't match my version (2.8.4) I hope the answer turns out to be simple, and does not involve multiple steps, because I use the tools a LOT.
View 12 Replies View RelatedI am currently running into the problem where i will select 1 item by simply clicking on it, and when i go to select a second item, the first is then deselected. I can click and drag and select multiple items that way, but that doesn't work when the items and on different sides of the drawing and there are other lines and what not in between them.
I am also aware that i can hold shift and select the second item, and all is fine, but that is not my desired operation. I have been working with Autocad for almost a year under the notion that i can just select multiple items by clicking on them all individually and would love to have this operation reinstated, primarily for ease and convenience, which increases productivity.
Is there any way to deselect an area after you've selcted it.
EX: I create a cut out, move my cut out and the dotted line area of cut out is still there. Or I create a box , but I cant get rid of it....
I know.. It's probably simple but I have been trying and I searched the forums before posting.
When I'm working with the pen tool, and create just a stroke (not a full shape), I have to go all the way over to the direct selection tool and click in the margin to deselect that one path. I see people on you to make strokes and deselect the current stroke and make another one with out even flinching towards the direct selection tool.
View 3 Replies View RelatedHow do I deselect when there is an image in the background? I'm used to using shift+right click to deselect, but if there is an image in the background then all it does is select the image?
View 1 Replies View Related