Photoshop :: Deselect Tool .. Using The Mouse?
Oct 27, 2008
Great Site! Hi!
CS2 / WindowsXP - Usually when I DESELECT an image (the marching ants) by keys CONTROL-D, or by right-clicking the drop down DESELECT, isn't there another way to DESELECT by...
... just r-clicking away from the image using the mouse to deselect the marching ants? I'm drawing a blank and I have tons of copy, pasting to do, and my right hand is getting very, very tired. I'm sure I used this function before, I just forgot how to enable this function.
I have been to the EDIT> KEYBOARD SHORTCUTS and PREFERENCES, but nowhere can I find this.
Am I tripping, or is there a way to actually do this?
View 1 Replies
ADVERTISEMENT
Mar 12, 2013
On one computer when I select my selection tool I have a circle with a + inside or - whichever I choose to select or deselect an object. BUT, on my other computer I have a large cross hair type thing and I can't tell whether I am selecting or deselecting... what the heck is going on!!
View 2 Replies
View Related
May 14, 2013
not be able to go on to something else in a project because I have lines trailing behind my cursor, forcing me to use the undo key or to choose a different, less intrusive tool. Small problem I know, but this has kept me stuck for two days. I did find an answer for an older version that involved about 4 or 5 steps, which I found incredulous, since all I have to do is click once to select a tool. Anyway, the instructions didn't match my version (2.8.4) I hope the answer turns out to be simple, and does not involve multiple steps, because I use the tools a LOT.
View 12 Replies
View Related
Oct 29, 2011
I have an image, I was manipulating it, smudging etc. Then I selected the lasso to crop out the image. Then I wanted to go back and blur something else. But it wont let me. The lasso'd section of the image stays flashing, even when I double click it to stop it. I am stumped as to how to exit this function. I don't know why it doesn't just switch to blur when I press the BLUR button.
How can I get this to stop? It keeps interrupting my edits and I now have to do it all over again in a separate window as no matter how many times I undo the lasso section will not stop flashing!
View 2 Replies
View Related
Jun 9, 2007
photoshop is not being able to deselect text when I am using the text-tool so I can edit more text. Here is what I mean - say you have two text layers that have been filled out. Now I want to change both of them to something else. I select the first text layer and change it's text. Now I want to move on to the next layer, I click some random tool and then click the text tool again. Is there a key command that I can hit that will make the text tool active so I can select the text on the other layer?
Also I'm using CS3.
View 3 Replies
View Related
Oct 11, 2012
When I use the "Rectangular Marquee Tool" with my mouse, it is often difficult to do it accurately. Is there an easier way to do it than with the mouse, - can I manually enter the size of my selection .
View 2 Replies
View Related
Apr 29, 2008
Is there any way I can map the Hand Tool to the middle mouse button?
View 2 Replies
View Related
Jun 14, 2012
All of a sudden in the last two weeks I can no longer move my selection tool with my mouse. It will only move with the arrow keys. Also, I am unable to deselect by clicking the mouse, only by Ctrl+D or selecting another tool. I have not changed anything with my system in 5 months.
View 4 Replies
View Related
Oct 3, 2012
I tried to install the latest pacth but that doesn't fix my problem. (photoshop CS5 12.04 MAC) As i said in the title: when I'm under hand tool mode or when I hold the spacebar down to get the hand tool, the image mouves around and just continue to glide as if it wears ice skates!
View 4 Replies
View Related
Sep 20, 2012
I just installed Creative Suite CS6 and in Photoshop, when I use the move tool a small popup window shows the mouse coordinates. I can't see any option to turn this off, either in the Options bar or the Preferences.
View 3 Replies
View Related
Jul 12, 2013
The wheel as a pan tool was good the other day, but today when I opened CAD, it did not work anymore, there was no pan tool appearing when holding the wheel of the mouse. It is rather strange!! Then I searched the internet and resetted it by input command " Mbuttonpan---- 1-----enter", But there was no change.
View 5 Replies
View Related
Aug 10, 2011
I've installed GIMP-2.6.10-p1-Snow-Leopard on my Mac OS X 10.6.3 .
When I start to paint , I found that the tool icon can not follow up with the mouse.
View 2 Replies
View Related
Jul 17, 2013
How to set a tool tip to show up next to and follow the mouse during user interaction. It's the same function that the CommandManager.Pick does?
If it's not a built in function then I guess it's created by a tool tip that gets moved around to follow the mouse on mouse move?
View 1 Replies
View Related
Aug 17, 2012
I am finding some inconsistencies when using tools provided in Paint.NET.
For 2 examples, I'll simply describe the behavior of the Escape key.
-----------
Exhibit A:
I would like to use Text to type in some letters with different colors. What I would do is press T (shortcut key for Text), select a color, type a letter, press ESC, nothing happened, click somewhere else, click back to the letter, select a different color, type a letter, ESC, nothing happened, repeat...
After I'm done, I press ESC again with nothing happening, and press a different shortcut key to continue editing, like O (shortcut key for Line/Curve).
Exhibit B:
I would like to draw a circle and a line. After finish typing, I press O four times to use the Ellipse tool, draw a circle, and then press ESC. Nothing happened. Next, I press O once to use the Line tool, start drawing a line, and then press ESC. At this point, my drawn line is canceled for good, and I need to either use Redo to recover it, or redraw the line again.
------------
Here I present to you these two exhibits. Notice that sometimes, pressing ESC does nothing other than jumping back to cursor, and sometimes cancelling the action that was done.
Would it be possible if the Escape key has a consistent action throughout all of the tools?
View 3 Replies
View Related
Sep 12, 2013
I try to drag something - either a whole shape, a point or when I'm using a tool like the pencil or the knife and need to have a continuous path, Illustrator is glitching on me. It keep breaking my path and jumping a little even though I never let go of the mouse. Or when I'm trying to copy and paste something by dragging, it will suddenly unselect it, paste it where it was and then copy another shape. Crazy thing is, my mouse works fine on everything else non-Illustrator. It's happening in two different versions on two different computers, one of which has CS6 and is a brand new iMac.
I'm using the following:
5 year old iMac running OS X
Illustrator CS 3
The other computer is at work:
brand new iMac, can't remember the OS
Illustrator CS 6
View 1 Replies
View Related
Aug 28, 2011
I recently have developed a problem using Photo Paint. I have already tried to use F8 and restored factory settings, and I have uninstalled and reinstalled the program. I do not have this problem when logged in as the guest user on my computer, just under my normal profile. I want to correct the settings under my normal profile.
When editing the tool tip does not line up with the selector or cross hairs. For example if I have the paint tool selected and try to paint it actually begins painting about two inches from where I want to begin painting. See picture below: The small clear circle represents where I want to begin, but the red dot is where it paints.
View 8 Replies
View Related
Dec 31, 2012
At first I thought it was a touchpad problem, but I discovered that three different optical mice have the same issue + a 4th optical mouse on a different computer also experiences this issue...
particularly when I am using the free select tool, the mouse movements start to get VERY jerky when I am going around corner after corner when my image is zoomed to 100% or greater on a 2500px or larger image, it lots of times causes me to mess up because it jerks around a lot... no other program has this issue, not even other programs where I need to get into tight corners with a mouse!!! this ONLY happens in Gimp!!! other tools have this jerky mouse movement problem to but is experienced mostly using free select!!! How do I fix this Gimp jerky mouse movement issue??? Gimp seems to be the only program with this issue!!!
View 2 Replies
View Related
Oct 13, 2012
My illustrator CS6 selection tool (black mouse icon) is broken. it wont let me move some thing or tranform/scale it any more. Normally i see 4 stroke squares to resize my square but now there are filled square and i cant to nothing.
View 1 Replies
View Related
Nov 22, 2011
if you can customize / move tool bars & zoom in/out using mouse wheel with AutoCAD 2012 LT ?
View 5 Replies
View Related
Feb 14, 2012
I've spent some time designing a chart using the table tool. Now I want to adjust some column widths and add some text.
However, the mouse keeps trailing a small table icon, and all it will let me do is insert another table. I can't enter text, or highlight a row or column, for example. Most of the right mouse click options are greyed out.
How do I change from this mode for the mouse, with the Table icon switched on, to other modes where I can do other things with the table I have already created?(If I create a new table below this existing table, all is well. However, I can't grab the content in the earlier table to paste it into the new one.)
View 1 Replies
View Related
Jun 3, 2012
What is difference between Text Tool used for paragraph text with pressing left click mouse in x5 and inserting placeholder text in x6.
View 1 Replies
View Related
Apr 12, 2013
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
View 5 Replies
View Related
Oct 30, 2013
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
View 2 Replies
View Related
Dec 17, 2012
When I select an area in Photoshop CS6, I can no longer deselect by clicking outside the area. My tool tip displays the cross with the plus sign in the lower right to indicate I am in additive mode. I can right click for a dropdown menu and choose "deselect" , but that is a drag that interrupts my thought flow and so annoys me.
I've tried going into preferences and making sure the cursor is "standard." I've reset my preferences. No caps locked, etc. What is going on? More importantly, how can I make it so that all I have to do is click outside the selection to deselect it. I'm working on a Mac, if that makes any difference.
View 2 Replies
View Related
May 12, 2012
I feel really dumb right now but for some reason I'm having trouble deselecting. First off, I'm talking layers and vector objects here. I know Cmd D deselects selections. But how you do deselect any layer which might currently be active? I'm working in PS CS6 for the first real time and it's like I suddenly got dumb or something.
I know you can select a blank area of the Layers Panel to do it, but my Layers Panel is full right now, so I don't even see any dead space. This is especially troubling because I'm making a lot of shape layers and if I do that while a layer is selected then I wind up making masks.
View 7 Replies
View Related
Aug 14, 2011
I'm having a hard time figuring out how to deselect part of an image. When I use the magic wand to select the white background it includes part of the thumb nail. How do I deselect the white part of the thumb nail so I don't remove it with the background?
View 6 Replies
View Related
Jun 22, 2008
I can't seem to figure out why I keep copying a path when I'm selecting a layer and using the magic wand tool. Each time I copy and paste, I paste the path instead of the selected layer. How do I unselect the path so that I can copy my selection properly?
View 3 Replies
View Related
Mar 12, 2014
I have been using elements 11 for months with no problems. Yesterday, out of the blue, I started to be unable to go back and edit anything I did when working in the program. I cannot deselect an image or text unless I change the tool I am using. I cannot then reselect something I have moved on from to edit it. I am very, very confused as to why I cannot use basic functions anymore in this program and it is making it impossible to use.
View 2 Replies
View Related
May 25, 2012
I used to be able to deselect an object by simply pressing the Esc key but I can't seem to figure out how to make X6 do this. I think its been set up that way as default on previous versions.
View 4 Replies
View Related
Mar 15, 2010
We are having an odd behavior in Illustrator CS4 in our office. Multiple users try to deselect objects by clicking in blank space, but the last object still appears as if it is selected onscreen. When they select another object (without holding SHIFT), it looks as if the old object AND the new object are selected...but when they delete or otherwise manipulate the newly selected object, it only affects that particular object and does not alter the old object that appeared to also be selected. Although the actual functionality is correct, it is extremely distracting and annoying because it looks like they have more objects selected than they actually do...and they can never really tell what's what!
For one user, this happens frequently when selecting objects with clipping masks. For another, it happens when simply using the selection tool on any old object. All users on Mac Leopard 10.5.5. Aside from resetting preferences which I've had one of the users do.
View 13 Replies
View Related
Nov 21, 2012
How do I return to non animated text after changing my mind and not wanting to use a previously selected preset.
View 1 Replies
View Related
