How to make my own toolbar buttons for ACAD 2004 yet am having trouble figuring out what I would write as the macro command for the operation in the button creation dialog box for a specific operation.
There will be 3 buttons. One for .XX, one .XXX, one .XXXX precision edit of an existing dimension. IOW, if I have a 2 place precision dimension and wish it to be 4 place, I'll click the '.XXXX button' then click the dimension and it will change to 4 place. In addition, I'd like for it to update immediately for multiple dimension picks if possible just like 'match properties'.
Using the CUI I can drag buttons from one toolbar to another to copy them but they remain linked. A change to one changes the other. How do I create a brand new button that I can add my code to?
When I make any changes to my custom toolbars, every custom toolbar that I have made will appear on the drawing after I click apply and OK. Then I have to go through and X out about 100 toolbars. I would like to be able to turn all of the custom toolbars off at one time. Then only turn on the ones that I want to use.
I recently installed GraphicsSuite x6 (with SP4) on a new Surface Pro 2 tablet running on Windows 8.1. My command bar buttons are not displaying properly. Depending on whether I have the open on the tablet screen or an external monitor, the toolbar buttons will not be displayed. This also affects some (but not all) dockers. For example the buttons and labels on the Align and Distribute docker are not displayed, regardless of which display I am using. This issue affects both CorelDraw and Photo-Paint.
I have made a 2012 LT custom ribbon and a custom panel. I have transferred buttons from my autocad 2006 to my 2012 LT. They work just fine. The probem is that in 2006 I had drop down buttons to save toolbar space. I want to be able to add the drop down button feature to my new panel. I do not see how to create that type of button, so I can add the regular buttons to it and have one drop down button with those commands in it.
I downloaded autocadlt14 today. I am able to get into the program and go to autocad classic. I can open my drawing from autocad2002 and work with them. When I try to create a custom toolbar in classic it does not save it when I close the program.
I am trying to make buttons on PS. I am very new to this. I am taking a class in DW and didn't know that PS was going to be used so I didn't learn it (so now I am trying to learn 2 software programs at same time).
I am trying to make buttons for a site redesign project for class. I figured out how to make the layer, put the name (eg. Home, About Us, etc) and do drop shadows, bevel etc. The problem is when I do that it only makes these changes over the text. I cannot figure out how to make a box around the text, and make that box a button. It is frustrating. I have tried so many different things.
I need create 2 buttons on bitmap image, both in the bottom, aligned horizontally. It will be hotspot areas, and work as action buttons in autorun. Then i need to determine the X,Y coordinates of the upper left hand corner, the Width, and the Height of each hotspot area in the bitmap. The image area where buttons will be placed is white(transparent), so i want just image style buttons - integrated into the background image, or windows style buttons. How to make buttons for my bitmap?
I'd like to make a button for the toolbar or the tool palette that will print consistently every time I use it.
For an example, I want to click this button that has the parameters for ADOBE PDF, 11x17, Lanscape, a certain Plot style table, etc......
I want to make a button for each print setting I use.
HOW...HOW can this be done? my inquiring mind wants to know!!
Having this little button will just me me that much more proficient, and ever bit of time certainly counts when under pressure to get out some drawings.
Architecture 2009 running on Windows 7. Dell Precision T5400 with a Quadro FX570 graphics card.
I have lately been having some issues with text in Architecture 2009. I first noticed that within Mtext, when you hit the "UPPERCASE" or "lowercase" buttons, the text disappears in the editor, and no changes are made. Not the end of the world, but not handy.
Then it stopped letting me type in Mtext boxes at all. The return key seemed to work, but nothing else. Then it started converting text typed into Mtext boxes into (I think) Chinese characters. Really not handy. At this point I decided to try to reinstall. First I tried a repair, then reinstalled over the existing installation, then uninstalled completely and reinstalled from the disk. I've also done a windows restore, though as this has slowly been falling apart, I'm not sure when I should restore back to.
I have Mtext basic functionality back, but the "UPPERCASE" and "lowercase" buttons still make the text disappear.
Not sure if it's related, but I also get a Fatal Error e06d7363h at 758bd36fh about 4 or 5 times a day. Usually it's associated with the open command (ctrl+o), but sometimes it just happens at random.
I am trying to make a logo button for my site, but unfortunately I have no idea what font to use for the logos. I have attached some examples and was hoping that I could get some help.
When the user clicks on two button on the stage I need an eleiment to disapear.
for example:-
If one of the buttons is pressed... nothing should happen.
Then when the other button is pressed then an element disapears.
(The user needs to be able to press the buttons in any order)
I have been usine verables to try and work this out. How I understand it is that I sould be able to store the verable on the stage and recall it.
This is where I have the problem. I have not pasted the stage code because it just does not work. But below is the code for one of the Symbol Button.I had set all the "Var" to "0" at the stage but can not change all recall them.
sym.getSymbol("button1").play();
var but1 = 1
}; if (but1 = 1 && but2 = 1){ sym.$("element1").hide();
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
Is there a way to make the color picker in the toolbar bigger?
I've been using Illustrator for some time now and find this part of the software to be annoying as I frequently mis-click this tiny area and the switching between foreground and background color is easily mismanaged and you end up changing the colour of the one you didn't intend and then have to make two clicks to remedy that.
Do any other users find this to be a badly designed part of the software?Also, when in the colour creation dialogue the 'preview' tick can somehow be switched to on as default.
I can understand that there are situations where it might be better not to see your colour change in the document in real time, but to have to click this (again very small) tick box again and again feels like bad design.
Is there a way to customize menus or add buttons to the control bar to make repetitive operations single step. Thinking specifically of adding an import button somewhere (similar to PS Elements 2) in which the current scanning settings are stored. Presently it takes about 6 steps through the menu to accomplish this.
While working on a drawing today I realized that when I modified dimension styles ... arrow size, text size, spacing, etc. , upon closing the modify style window the changes I'd made automatically took effect on the screen. In other words I did not have to use the dimension update command to make the changes appear in dimensions already in the drawing. All the dimensions changed to show the changes automatically. I'm pretty sure I haven't seen this before.
I went to another drawing and the updates did not automatically occur. I inserted part of the old drawing into the current drawing and made dimension style changes again. The changes updated automatically in the new content but not on the content inserted from the old drawing.
I'm using autocad LT 2010 and need to send the drawings to someone using autocad 2004, how do i save the drawing so they can open and print with 2004. i was told that theres an option under save as but its not coming up on my version.
I have 106 files that I have to save as version 2004 for a contractor. They have been able to open all of the converted files except one. I have run an audit and found nothing. I have purged everything and still no luck.
I am doing some tooling drawings for my company. I am using AutoCad LT 2008. When I email my drawings, I have to convert them to Autocad 2004 so the tooling company can open the drawings. They then convert it to Mega Cad 4.8 to import it into their system. My problem is that any text in my drawings does not show up for them in either programs. I have tried several different fonts, but nothing works. This is causing time consuming problems for both of us.
I have a surveyor requesting that we convert our Autocad 2012 Civil 3D files to Autocad 2004 so they can use them to produce as-built drawings. Is that possible? The drawings include profiles and cross sections.
When I right click on a viewport I no longer get the menu that includes the lock/unlock choice, or anything else. I can select the viewport but I have no control over it. Also when I select objects the layer information is not displayed. Until today I did not have this problem. I'm thinking it might be a settings issue, because if I open this file up on another computer I can control viewport as usual. The only think I can think of that I may have done different is I was experimenting with rotation of view ports.
We are now running AutoCAD 2012 on our network. We had a third party come in a long time ago and write us a custom macro that generates specsheets for our product. The problem is it was written for AutoCAD 2004.
Any way to move that code from 2004 to 2012 somewhat easily. If not easily, at least tell me that it is possible without having to rewrite the entire macro.
