Illustrator :: Way To Make Color Picker In Toolbar Bigger?
Sep 10, 2013
Is there a way to make the color picker in the toolbar bigger?
I've been using Illustrator for some time now and find this part of the software to be annoying as I frequently mis-click this tiny area and the switching between foreground and background color is easily mismanaged and you end up changing the colour of the one you didn't intend and then have to make two clicks to remedy that.
Do any other users find this to be a badly designed part of the software?Also, when in the colour creation dialogue the 'preview' tick can somehow be switched to on as default.
I can understand that there are situations where it might be better not to see your colour change in the document in real time, but to have to click this (again very small) tick box again and again feels like bad design.
Feature that would pick the right color on the 1st mouse click when working with images that have many colors and shades etc...Today we need to move the mouse over the pixel and click it to select the color under it and make it active, only then we get the RGB/HSV/Alpha info about it.and if its not the correct pixel info we need to select again. etc...
to make the color selection faster and more accurate on the first click and also enable us to select directly only the pixel with RGB info we want.
It would be great to have online/active display of the Color and RGB/HSV/ALPHA information on the pixel under the color picker , in the toolbar like in the picture i have added.this would make color selection easy and with less clicks on the mouse.just move the mouse over the image, look at the color and select the color you need.the data can be placed anywhere, I just placed it there since its connected to the tool.
This would be great to have on other tools, like the (Magical) Fill Bucket so we can select the color we want to fill with other color etc...or the Magic Wand selection tool to select the color with the RGB info we want.
Working in Illustrator CS5 on a Mac. When choosing a color in the palette, the preview showing up is different than what is in the palette. If I hit "OK" the actual color chosen is the one in the palette, not the preview window... Including some pics for reference. In my 10+ years of using Illustrator, i have never seen this.I am using a Dell monitor on a mac... not sure if that would make a difference.
why can't i open my "Color Picker" in illustrator CS5 ?I can find my color picker in Photoshop CS5. But It doesn't show out in illustrator CS5..I already check all set up still cant find it..
how to show the color picker dialog in Illustrator programmatically?
In photoshop that's really easy, just:
app.showColorPicker(true);
In Illustrator I couldn't find any reference to such a method or other possibility to show the dialog programmatically, that you would normally get when double clicking on the fill color square within Illustrator.
Is that possible by using app.executeMenuCommand or some other method?
I am writing a script that opens the color picker dialog in reaction to a click on a button. I want to be able to get the chosen color and use it within the script.
I'm running Design and Web Premium CS6 on a Windows 7 machine. I was recently using Ai's Recolor Artwork dialogue for a CMYK document. I wanted to convert my 4 color artwork to Pantone solid coated. I decided to chose some different Pantones. In older versions of Illustrator I could easily open the Color Picker, click on a Pantone value and then just type in a new value to scroll to it. This is no longer the case with Ai CS6.
Is there a Hexadecimal Swatch Palate or Color Picker for Illustrator CS5? If not -- in CS6 - as I'm thinking of upgrading.But it seems like such a thing is so basic, surely I'm just missing it?
Everytime I select a color in Illustrator it has the "Out of gamut" warning and the color I want appears darker and different then how It looks in the preview of color picker. It is making the colors of my design really ugly. This problem also seems to be happening when I select a color in Indesign, but I'm not sure if this is caused by the same thing.
The color swatches in toolbar for fill and stroke are not functioning as they should. When I select an object on the artboard, the swatches display fine in the toolbar for what they should be. However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be.
I am using 16.2.1 (cloud) for Mac OS 10.8.2
I've submitted a bug report.
Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting. I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.
--Toolbox: The 2 columns of Tools on the left side of the Editor screen.
--Foreground Color & Background Color: The color filled squares at the bottom of the Toolbox.
--Color dialogue box: This is the pop-up that is labeled at the top with "Color". It shows 48 different color squares (6 rows by 8 columns); they are labeled "Basic colors:". Right below the "Basic colors:" array is another 16 empty squares (2 rows by 8 columns) to be filled with colors to be defined. There is a "Define Custom Colors>>" button when clicked opens up a color picker with HSB RGB stacked below the color field screen. See this link to the Microsoft "Color Dialogue Box", [URL]
--Adobe Color Picker: The interactive dialogue box with the color field screen to the left and the HSB RGB numbers stacked on the right side.
[URL]
The problem:In PSE 10, when using the Eyedropper Tool or clicking on the Foreground Color or the Background Color, the Microsoft Microsoft "Color Dialogue Box" pops up instead of the "Adobe Color Picker" dialogue box. This started about a month ago. I use Windows 7.
I want the "Adobe Color Picker" to pop up (like it used to) inside PSE 10.
if you look at the image attached the colours on the right are what the color picker is displaying and if I use that hex code thats the colour the web page displays, but if i fill in any element the colours circled on the left are shown in photoshop.
Why is the color picker window showing a different color to the whats displayed?
I'm assuming this problem I'm having stems from having color-calibrated monitors, but let me know if I'm wrong!
To preface, this is the setup I have:
Windows 73 monitors as follows, all have individual color profiles calibrated using the Spyder 3Cintiq 12WX Dell U2410Dell 2409WFPPhotoshop CS6 - Proofed with Monitor RGB, and tested with color-managed and non-color-managed documents . I usually do most of my work on the Cintiq 12WX, but pull the Photoshop window to my main monitor to do large previews and some corrections. I noticed that the color picker wouldn't pick colors consistently depending on the monitor the Photoshop window is on.
Here are some video examples:
This is how the color picker works on my Dell U2410:
[URL]........
This is how it works on my Cintiq 12WX:
[URL].........
Main Question
I know the Cintiq's video capture makes the picture look more saturated than the Dell's, but it actually looks fine physically, which is okay. But notice how the Cintiq's colour picker doesn't pick a matching colour. It was actually happening the opposite way for a while (Dell was off, Cintiq was fine), but it magically swapped while I was trying to figure out what was going on.
Semi-related Question regarding Color Management
Color management has always been the elephant-in-the-room for me when I first tried to calibrate my monitors with a Spyder colourimeter years ago. My monitors looked great, but Photoshop's colors became unpredictable and I decided to abandon the idea of calibrating my monitors for years until recently. I decided to give it another chance and follow some tutorials and articles in an attempt to keep my colors consistent across Photoshop and web browsers, at least. I've been proofing against monitor color and exporting for web without an attached profile to keep pictures looking good on web browsers. However, pictures exported as such will look horrible when uploaded to Facebook. Uploading pictures with an attached color profile makes it look good on Facebook. This has forced me to export 2 versions of a picture, one with an attached color profile and one without, each time I want to share it across different platform. Is there no way to fix this issue?
Pictures viewed in Windows Photo Viewer are also off-color, but I think that's because it's not color managed... but that's a lesser concern.
You know how when you're painting, you can hold ALT and it will pick a colour from the canvas? Well, for some reason, mine still picks up the colour but it sets it to the background colour instead of the foreground colour.
And when I actually select the colour picker tool, it will only select the background colour but when I hold Alt, it selects the foreground colour. Basically it's flipped where it's supposed to select.
When I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
I am a new user to paint.net, because the tool I used for complex image manipulation does not run on the OS of my new machine. Although I could easily purchase the newest version, I needed work on some pictures now. Paint.net was easily available and does most of the thins I need at the moment. In addition, it is officially supported at my work place, so it's a good idea to learn how to use it.
Paint.net has some great features and a cute UI, but there are some issues I would like to see improved. The one at the top of my list is the font preview. I am doing some text on a number of pictures and want to check out some fonts. Unfortunately I can't change the sample text in the font list (at least I do not know how).
However, meanwhile I found a even better function (actually the way I would like to see it). When the font list is open, I can scroll through the list and the text will instantly updated. Cool.
Great thing would be to move the color picker out from the tool box into the color selection, so that it would be always available. Also it would be useful to not only pick one pixel sometimes but the average of a greater area.
When I try to edit the color of a shape layer by opening the color dialogue box of the shape layer, the color that is picked up is a lighter color than the color I clicked on.
The eyedropper is set to point sample and all layers. This problem does not occur if I open the color dialogue box that is part of the toolbar.
Is there a way to choose colors outside of the Photoshop application using the Color Picker? Coming from Macromedia Fireworks, I have become accustomed to using the Color Picker tool within Fireworks, which enables you to pickup any color outside of the Fireworks application.
I have seen thrid party tools that let you choose colors from various programs, but they just give you the color scheme and you must type in these color values within Photoshop.
what is still missing in smoke is having the color wheel while picking a color. The color wheel will enable us to pick any color straight from the wheel , it's much faster rather than trying to mix the desired color using RGB combination. it will be cool to see this feature in next release.
I have an image it is on my computer, I am being told it nees to be larger, Hi-Res , and 300dpi. I do not know what any of that means with the exception of bigger. I do not know anything about photoshop either. Is it possible to make a photo bigger, hi res and 300 dpi?
I have a client who would like to create a banner that is 6x5 feet. She supplied me with a very high quality photo that she'd like printed on the banner. Ideally, it would fill up most of the banner. The file size of the photo is 670 mb. In Photoshop's "Image Size" window, it says that it's 12960 x 8640 pixels, 36 x 24 inches, and 360 ppi.
Is there some way to make this photo display larger, short of taking a new photo with a higher resolution? What happens if I up the resolution in the "Image Size" window?
Also wondering why this file would be 670 mb but only 36x24 inches in size... It doesn't seem to add up to me.
way to make 4 white diamonds within a bigger yellow diamond. I try to make an big diamond by rotating a square 45 degrees. No problem there but whey I make the smaller diamonds out of squares and try to put them into the larger diamond it is all messed up?
