AutoCAD .NET :: WinForm Font Distorted In 2011
Nov 15, 2011
I am using .Net API's with AutoCad 2011. I am using "Calibri" Font in my WinForm Dialog Box with a height 9.75. Loading the dll and functionality is perfect. No issue is there.
BUT, Now the problem is, whenever I am opening that form in AutoCad, the labels of that form is changed as the AutoCad substitute font for missing font files (in my PC it is "simplex.shx") !! But in Combobox, Treeview, Listboxes the same font is used and it is perfect there. Problem is only in the Label. I wonder why this is happening. I used a table layout panel in my form with 3 rows and 4 columns. Now placed the label in one cell of that table layout panel. In fact I placed the combobox, listboxes are also in other cells of that table layout panel.
why the font is changing in WinForm?
View 2 Replies
ADVERTISEMENT
Jun 19, 2011
why the Arial narrow font used in dwg files from earlier Acad version won't display as expected in Acad 2011/Windows 7/32 Bit.
All text characters display as a very simple thin lines of constant thickness no matter how close you zoom in. Neither can I create new text using A/Narrow though all other fonts work ok.
Files with this issue were created in WindowsXP on a PC and the problem is surfacing on Win7 running on VM Ware Fusion installed on iMac & therefore preventing me from fully migrate over to Mac as I need to work now and again on old files.
View 0 Replies
View Related
Mar 18, 2012
I wrote some stand+alone application (WinForm=, where user can specify dimensions.Now after button click I want to switch form to current AutoCAD file and prompt user to specify point.
From this point I want to start drawing few lines.And I don't know how to switch to AutoCad and get current drawing space.
View 3 Replies
View Related
Dec 13, 2013
When I place a breakpoint inside a Windows form i get the message "No Source Available" from Visual Studio.
I'm using Application.ShowModalDialog(..) to launch the dialog.
How can people develop code without being able to debug? This has been an issue for some versions now and the NEXTFIBERWORLD=0 is not a solution for me since the whole AddIn acts strange when i do that. All I find when searching for this is the NEXTFIBERWORLD trick.
View 5 Replies
View Related
May 3, 2013
How can I dwg file in the excel file in c # winform transfer?
View 5 Replies
View Related
Aug 27, 2012
I've some function in my command which calculating lots of data on dwg file.
I would like to show to user a WinForm with progress value. From the command I'm incrementing value of ProgressBar.
The problem is that my ProgressBar is incrementing to the 100% after done all the job - suddendly.
I think I can use some threading or backgroundWorker but it's hard for me and I didn't find any examples.
View 6 Replies
View Related
Aug 6, 2012
I need a winform control like photoshop in my project, yet it don't like so complex like phote shop, what I need is edit image, room out,zoom in,draw text, rect, change its color and so on, also user can move the object they created
View 4 Replies
View Related
Apr 3, 2012
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
Apr 9, 2012
Why do sometimes texts (in my autocad 2011) seem or appear distorted as the one of the texts shown below:
Untitled-1 copy.jpg
Aas you may notice, the lower written text is not as "neat" as the above one, although evrything for these two texts are same: style, layer, height, font, ...????
View 6 Replies
View Related
Jan 8, 2014
When exporting drawings to PDFs, one computer distorts all text as shown here:
When exporting the exact same file to PDF from any other computer, the text appears correctly as shown here:
All computers are running Inventor 2014. What could cause these results? Can the text settings be customized?
View 4 Replies
View Related
Aug 8, 2012
My layout screen looks distorted. Here is the drawing, you will see the chairs and tables are off a bit in angle. I pulled up my view screen and the Z is at 1" which I don't know if that means anything, but it won't let me edit.
View 5 Replies
View Related
Aug 8, 2012
See the attached drawing.
The angle on the layout is slightly distorted. When I open the drawing on another computer it is fine. Even when I brought in a new chair ( on the right of the layout) at what is supposed to be a 90 degree angle it is slightly off?
View 5 Replies
View Related
Aug 7, 2012
I am in top view but my objects look distorted like they are on an angle?
View 3 Replies
View Related
Aug 7, 2012
I am in top view but my objects look distorted like they are on an angle?
View 2 Replies
View Related
May 1, 2012
I'm Alex and I am new to Inventor. We just switched to Invetor From CAD and have been learning as i go mostly. I have been experiencing problems that are leading to major setbacks due to requireing me to redraw multiple items. With my job we have to use wide flange beams and square columns etc..I'm able to draw the indidviual parts and at times have no problem with anything being offset, crooked, skewed or anything. But I find that I'm doing something in the assembly process that is causiing my parts to become skewed/distorted in the assembly and thus also on my view layouts for prints.
View 6 Replies
View Related
Jun 30, 2012
I have tried copying/pasting into word from AutoCAD and the quality is not good, very distorted.
I have also tried WMFOUT and didn't like the quality either when pasting into Word.
My best option has been to plot and save as a .jpg, and the quality is great except the black lines turn grey and I really need it to be black. Is there a way to make it look black?
View 5 Replies
View Related
Jun 13, 2012
I am having a problem with a view being shown rendered.
I have a tall piece of material handling equipment that is drawn to scale and is approximately 30' tall. When I render the view and take a shot of it, it looks angled based on the camera angle, when in reality it should appear straight (see attached picture).
How do I get this to look correctly?
View 3 Replies
View Related
Nov 29, 2011
I often use gradient cylindrical fill to paint pipes, however if gradient has to fill wide boundry it gets distorted, i found the way of making a short block and scaling it, gradient fill is consistent. It's ok but i want to make a dynamic block out of it and i cant, also if i explode this block gradient fill problem reappears (see pic)
Basicly i want similar looking hatch but without problem.
View 6 Replies
View Related
Jan 15, 2013
I am currently working on a culvert drawing, using two view ports for my plan and profile sheet. As you can see below in my attachment, the UCS icon in the upper viewport is distorted, I do not how this occurred nor do I know how to correct it.
View 2 Replies
View Related
Jan 15, 2013
I've a problem with "DWGtoPDF"-Plotter of Acad2013. I give the textstyle "arial" in Acad and plot it to PDF. In the PDF-Sheet i see the Fontname "ArialMT" in the document-options. I want to give the PDF's away and fear, that he gets an error while opening.
View 1 Replies
View Related
Mar 8, 2013
I have been having a problem using photoshop on the second monitor connected to my mac.Here i have put photoshop between the two monitors to show the issue.Here is how my mac screen looks and this is how my second monitor [LG] looks
I have checked all the plugs and no other programs have this problem.I have photoshop CS6 and up until just over a week ago it was working perfectly fine on both monitors.
View 5 Replies
View Related
Jan 7, 2005
How can I transform a text box so one side might be at an angle, curved, and so forth.
View 3 Replies
View Related
Jul 29, 2009
I am trying to design wedding invitations for my sister, but the fonts look distorted. I use a template created by my printing company, and the resolution is automatically set at 250. I view the sample at 100%, but can see where the edges of the fonts look "pixilized" and not crisp. Even when I print them they look this way. I have tried over 20 fonts but they are all doing this. Is there a special setting that I need to use to have the edges of the fonts look crisp?
View 2 Replies
View Related
Aug 21, 2006
I have Photoshop 5.0 Limited Edition.
I have just bough a Toshiba Satellite P100 which has a 17" screen. I have put a photo of my daughter on the Desktop but because of the width of the screen it is distorted sideays (widened).
How can I use Photoshop to cancel the datortion by compressing it?
View 4 Replies
View Related
Sep 14, 2007
come from the 3D animation world.
I have a few photos that are very distorted.
View 8 Replies
View Related
Jul 6, 2005
I'm converting images for print. I converted my raw RGB JPG files to CMYK tiff files. The converted pictures look fine in photoshop and windows picture viewer. When I import them in Quark my pictures colors show up very distorted.
View 7 Replies
View Related
Oct 14, 2009
I have just spent several days putting a project together. Mainly still images with some digital video.
When I rendered the project (pal 16_9 frame based also tried lower first) the result is far from acceptable. It looks like a low res picture although I rendered with high quality settings (the same ones I have used many times before) Straight lines seem to have a slight saw tooth effect. If I utilize an overlay the problem is suddenly much more pronounced. Wether this is caused by the overlay itself or the fact that the images are enlarged slightly I don't know.
The video clips from my digital video camera seem to be ok, the problem being mainly with the still images.
By the way the same images created as a slide show in movie factory are perfect.
I have a fast computer with vista installed and had excellent results earlier in the year with another sinilar project.
View 6 Replies
View Related
Dec 11, 2012
Using pro x4, when he imports a AVCHD clip and plays it back, the audio is distorted. The same clips audio is fine playing directly from the desktop, using windows media player. It also plays back fine in another video editing program.
(O.S Windows 7 Ultimate 64bit).
View 14 Replies
View Related
Dec 17, 2010
I have a 16:9 video and when I select "save as still image", the resultant image is squeezed into 4:3 and doesnt look good. I cant see anything in preferences that allows me to adjust this. Can I tweak "save as still image" so it keeps the correct aspect ratio?
View 2 Replies
View Related
Apr 2, 2012
I have a video clip (.MOV) which I have added to my project.
When I preview the clip itself the sound is perfect. However when I preview he actual project, the sound is distorted.?
View 1 Replies
View Related
