AutoCAD .NET :: Netload Not Loading DLl
Nov 25, 2011
i have a set of C# .net dlls (.net 3.5) which i used to load automatically in Autocad 2010. Everything was working perfectly but suddenly one fine day one of the dll stopped loading. So i tried loading it using netload command but doesn't work. Its not showing any messages after netloading and when i type commands of that dll it says unknown command. I tried putting a message box in the initialize of the dll but that message also not showing up.
View 5 Replies
ADVERTISEMENT
Jun 15, 2012
I've got a firm of about 60 architects and we use a custom dll that loads on drawing open. the dll loads fine on all but one computer. even explicitly issuing the netload command and grabbing the dll manually does not work. it also does not work on other profiles on that computer (i tried an admin profile, even though the user is a local admin).
we're using .NET 4.0 on ACAD 2011
View 9 Replies
View Related
Dec 26, 2012
I'm having trouble with my command not loading via a netload in AutoCAD 2012 SP1 64bit running on Windows 7 64bit. It works on most of my user's computers, but on a couple of the computers it doesn't seem to be doing anything. I'm using Visual Studio 2010 for coding and debugging, but I don't have debugging software on the computer that is causing the problem. I've attached my commands class in it's entirety to this post. The dll resides local on the user's computer and is not in a network location. When I run the netload on the development machine or one of my other working users, I get the message boxes and the program seems to run fine, but on the computers that aren't working I get nothing. No errors, no message boxes, nothing.
View 9 Replies
View Related
Apr 27, 2012
I have custom menu items that call code in .DLL files that are loaded using Netload in the ACAD.LSP file. However, since upgrading to 2013, the DLLs don't seem to load and the menu links say the macros don't exist.
View 9 Replies
View Related
May 28, 2012
Is there any way to return the path to the dll that has been used in Netload the addin application?
View 4 Replies
View Related
Oct 18, 2009
The loaded file is a .dll written in Visual Basic.NET using Visual Studio 2010.
NETLOAD Cannot load assembly. Error details: System.BadImageFormatException:
Could not load file or assembly 'file:///C:Documents and SettingsdanMy
DocumentsVisual Studio
10ProjectsClassLibrary1ClassLibrary1objx86ReleaseClassLibrary1.dll' or
one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
View 8 Replies
View Related
Sep 13, 2013
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies
View Related
Jan 22, 2014
I'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
View 3 Replies
View Related
Oct 24, 2013
Im trying to load .shp files made from ArcMap 10.1 and continually get an error labeled “Invalid Repository Type”. I can’t seem to find any information on what exactly a repository type is or how to correct it.
View 2 Replies
View Related
Dec 6, 2013
AutoCAD MAP loads a some AEC modules when initialising.
I want to send my .NET Init message to the commandline after these AEC loading prompts
I tried waiting for Application.Idle(QuiescentState) without any luck.
View 2 Replies
View Related
Apr 9, 2013
My boss recently gave me a USB with a huge amount of hatches on it. The hatches are in .pat format. When I opened up AutoCAD (the version I have is AutoCAD Civil 3D 2011), and typed in "hatch" to have a look at the hatch creation properties box, I can't find where to load a hatch. I am also a bit confused as to where I should save all these new hatches so I can access them easily in the future.
View 9 Replies
View Related
May 30, 2012
When I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
View 1 Replies
View Related
Mar 4, 2012
Is it possible to do actions directly after loading the DVB file by command appload in the autocad command bar?
For example, creating a menu in the menu bar with the available procedures in the .DVB?
View 3 Replies
View Related
Oct 6, 2012
Loading an existing batch file to AutoCAD2013 Lt. I have a toolbar that was setup before and I have a new machine, new cad etc and want to get everything back to the way it was.
View 2 Replies
View Related
Sep 12, 2012
When opening an assembly document via the API (inventorApplication.Documents.Open("path-to-document")), the browser pane and ribbon look like no document has been opened, even though the active environment (inventorApplication.UserInterfaceManager.ActiveEnvironment.DisplayName) is "Assembly".
View 2 Replies
View Related
Mar 20, 2013
After putting a myPartial.cui file in c:program filesmyfolder, I want to load it automatically at every next AutoCAD startup.
What are the ways to tell AutoCAD to do this task?
View 2 Replies
View Related
Aug 22, 2012
I'm trying to load a modal dialog, at the first loaded/created drawing. How can i find out when autocad is done with loading to activate the form. I have event handlers for document created but it gets called to early.
View 1 Replies
View Related
Sep 10, 2012
Curious as to how to load the 3D Modeling workspace so that I can access the editing features and whatnot without having to type in the commands. I have seen a few different questions dealing with this issue, they pretty much said to into the "custom user interface", click on the transer tab and then path to the support folder where you would load the "acad.cuix" file and drag the 3D Modeling Workspace over to the left hand side. The issue I'm having is that when I path to the folder with all the different ".cuix" files there isn't a plain "acad.cuix" file to be found and none of the other options offer any sort of 3D Modeling Workspace?
View 5 Replies
View Related
May 31, 2012
started a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies
View Related
May 7, 2012
this newbie question. I could not figure it out how to do this.
I found a sample project named RibbonSample in which by running a command, a new tab will be added to the ribbon.
I am trying to have that tab added upon loading the dll. So I added that command in the constructor of the dll, by "
SendStringToExecute" command. But the new tab did not show up. Then I added the method which creates the tab in the constructor, and I found the same thing. In both cases, when I type the command for creating the ribbon tab, a second tab, along with the first tab I added in the constructor, show up.
So I guess two possible options I have: first, find a way to make the new ribbon tab to be shown at first place, when the dll is loaded. Second, to find a way to postpone running a command added in the constructor of the dll, until the dll is loaded, so it can run like when I type it.
View 3 Replies
View Related
Dec 27, 2011
We have about 25 workstations on our partner company, with the exact hardware and software configuration. We have 2 workstations with problem, but the other 23 are fine. The problem is those 2 is taking to long when loading.
I tried to load the program without loading template (startup to 0) it loads fine. The problem starts after it loads template or existing file. I can tell it's not the file problem, because after we open a file successfully, any other file after that opens normally. So there must be another process after loading the first file.
I suspected there is an addon program that cause this. Is there a way we can see what processes are running on command line (like in Windows command console), so we can find what cause this?
I think this might also because they are using ACAD MAP3D 2010, which are not certified for Windows 7 64bit on their machine.
View 3 Replies
View Related
Jul 7, 2011
I have started getting the message 'The configured Heidi driver was not loaded. Switching to the default software driver.'
This seems to happen when opening a drawing but sometimes at random.
View 5 Replies
View Related
May 29, 2012
I have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
View 3 Replies
View Related
Jan 29, 2013
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
View 1 Replies
View Related
Dec 19, 2011
I have a user that just recently discovered that the add-in manager does not load any more. I has been working fine for some time.
And I mean that we can't even open the add-in manager. The button is non responsive. I have tried to open it from the windows start menu and I get the message " can't create apprentice server".
Of course this effects all of the ad-ins including the CC and the vault.
I can log in as administrator and everything works fine so the install is good. I'm assuming it's got something to do with his user account settings and on that vein I tried to delete his Autodesk settings in both the registry and his user folder but with no luck.
We are running IV2010
Windows 7 x 64bit.
View 8 Replies
View Related
Sep 7, 2012
I am working in AutoCad MEP 2013 and have some drawings where I have xref'd in a tif file for a background. When I initially open the drawing the tif has to be reloaded. If I do this right away after opening the drwing it says it cant be found. If I wait let's say 5-10 minutes and go back and try again then it will load. the tif is set to relative path. It's like the computer is taking a long time to find the file. This is not happening with every drawing in which I have an xref attached to a drawing. Sometimes all the background load immediately and sometimes they behave like this.
View 1 Replies
View Related
Oct 15, 2012
Out of the blue a LISP routine is not loading correctly. I get an error message (before I re-load file) that there is a problem with ACAD.dce file. When I re-load the routine it gives me a message that there is a problem with the dialog file (redefining object) Now, I did recently refine my search paths. All other routines seem to load fine and are without problems.
View 0 Replies
View Related
Jul 5, 2012
I have a bit of problem. I have created a Addin for Inventor using Visual Studion 2010 Professional.
My Addin Works fine for
Windows XP Professional Service Pack 3 (64-bit OS)
With Autodesk Inventor Professional 2012, 32-Bit Edition
Now I need to Deploy the addin on another Machine with below configuration,
Windows 7 Professional Service Pack 1(64 bit OS)
Autodesk inventor Professional 2012, 64-Bit Edition.
I tried to load my addin, it doesnot load, I tried to load it manually by Goint to Tools->Add-In and selecting my addin and selected "Loaded", Even then its not loading..
View 9 Replies
View Related
Feb 13, 2012
I have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
View 6 Replies
View Related
Jun 19, 2013
When I start up LT2008, I get a blank screen, but by menu is not laoding (it used to).
I have to open the <File> tab and the it has an menu option I can them load my .cui menu
View 3 Replies
View Related
Dec 22, 2013
After installing SP1 2014 Autocad started to crash by loading DLL that contains Civil 3D libraries. In the same time Civil3D works perfectly. Is there a way to load some DLLs when starts Civill3d but not Autocad?
View 2 Replies
View Related
