I'm trying to load a modal dialog, at the first loaded/created drawing. How can i find out when autocad is done with loading to activate the form. I have event handlers for document created but it gets called to early.
View 1 RepliesI have an app that uses a paletteset. The paletteset displays a modal dialog on a particular action. From the modal dialog, the user needs to be able to click a button to zoom to a particular coordinate. I have it all working, with one problem. The Zoom doesn't occur until the user closes the modal dialog. I know this is related to my limited understanding of contexts in AutoCAD.
I've tried calling my Zoom method from the modal dialog, from the parent paletteset, and asynchronously using doc.SendStringToExecute() back to my main commands class, with the same result. The Zoom occurs after exiting the modal dialog. How I can make the zoom occur while remaining in the modal dialog?
Is it possible to disable the dialog for choosing how transparency is treated ? If you to batch operations on EXR files you have to confirm for every file!
View 3 Replies View RelatedIs it possible to refresh drawing content when modal form is running?
I placed sample project in attachment.
There is simple form with only one button.
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click Class1.DrawLineOnScreen() End Sub
After button is pressed, application prompting user for picking 2 points, and draw a line (based on picked points).
Public Shared Sub DrawLineOnScreen() Dim editor As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim pFirst As PromptPointOptions = New PromptPointOptions("First point: ") Dim rFirst As PromptPointResult = editor.GetPoint(pFirst) Dim pSecond As PromptPointOptions = New PromptPointOptions("Second point: ") Dim rSecond As PromptPointResult = editor.GetPoint(pSecond) If rFirst.Status = PromptStatus.OK AndAlso rSecond.Status = PromptStatus.OK Then Dim line As Line = New Line(rFirst.Value, rSecond.Value) Dim tr As Transaction = Application.DocumentManager.MdiActiveDocument.TransactionManager.StartTransaction Using tr Dim modelSpace As BlockTableRecord = tr.GetObject(Application.DocumentManager.MdiActiveDocument.Database.CurrentSpaceId, OpenMode.ForWrite) modelSpace.AppendEntity(line) tr.AddNewlyCreatedDBObject(line, True) tr.Commit() End Using End If End Sub
Problem is that line had been added to transaction (to Model Space block table record) but nothing change on a drawing. Line will appear on a drawing after closing the form.
In opposite situation, without using modal form (only console) everyting works fine.
<CommandMethod("DrawLine", CommandFlags.Modal)> _ Public Sub DrawLine() Class1.DrawLineOnScreen() End Sub
I need to get normal modes for an electronic board. It is made of FR4 laminate. Does Inventor Professional 2014 supports transverse isometric materials in a modal analysis?
View 6 Replies View RelatedI'm developing an automation project using Photoshop
The project will open several files, do some resizing and change of formats, save the new files and presto.
The trouble is that sometimes Photoshop has problems opening the source files (i.e. the original images). When this happens the Photoshop opens a modal error dialog and gets stuck there.
This program runs unattended and I NEED to be able to detect (or even prevents) this dialog to display in order to not halt the program.
This program needs to handle 1000+ images daily and every time one image gets stuck is a royal pain in the butt...
is there any way to avoid this?
Is there a fix for modal dialogs open behind palettes in Photoshop cs6 13.0 (creative cloud update) + OSX 10.6.8 Snow Leopard on MacBook Pro? ( I am using 2 monitors where the second monitor is set to be the menu display. cs4 does not exhibit this bug. )
Toggling the Application Frame off improves the hiding 'feature' but this does not include the desired continuous floating in front of palettes in all circumstances.
An example is Blending Options, then chose Stroke, then chose the Color Picker. After clicking OK, the Blending Options dialog now sits behind the palettes. One trick is to click on another app, then back to cs6 to force a window redraw.
I just update lightroom to version 3.6 from the last current version. I am on a Mac pro operating system 10.6.8. Everything appeared to be normal until I tried to open an image in the develop module and nothing happens and the program freezes with the lovely spinning rainbow wheel and the program must be forced to quit.
View 21 Replies View Relatedhow to create a modal window in Adobe Edge Animate?
View 2 Replies View RelatedI often run actions that have modal control for certain steps turned on, in particular, when I want to give a layer a custom name. Prior to CS6, I'd run my action, the window would open allowing me to rename my layer, and then it finishes my action. However, in CS6, it seems to ignore the modal control button selected, puts in whatever the default info is and continues on.
View 2 Replies View Relatedmy animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
I am attempting to execute a set of actions containing two "Save" commands. The first works fine while the second does not. (The destination folder is ignored and the file is saved in the same folder as the first Save.) The only difference I can see is that the second "Save" is modal and the other is not. The fact that the destination folder is contained in the action makes me think this ought to work and I'm missing something obvious.
I have a JPG of the action set but I can't see how to attach it....
Im trying to load .shp files made from ArcMap 10.1 and continually get an error labeled “Invalid Repository Type”. I can’t seem to find any information on what exactly a repository type is or how to correct it.
View 2 Replies View RelatedAutoCAD MAP loads a some AEC modules when initialising.
I want to send my .NET Init message to the commandline after these AEC loading prompts
I tried waiting for Application.Idle(QuiescentState) without any luck.
My boss recently gave me a USB with a huge amount of hatches on it. The hatches are in .pat format. When I opened up AutoCAD (the version I have is AutoCAD Civil 3D 2011), and typed in "hatch" to have a look at the hatch creation properties box, I can't find where to load a hatch. I am also a bit confused as to where I should save all these new hatches so I can access them easily in the future.
View 9 Replies View Relatedi have a set of C# .net dlls (.net 3.5) which i used to load automatically in Autocad 2010. Everything was working perfectly but suddenly one fine day one of the dll stopped loading. So i tried loading it using netload command but doesn't work. Its not showing any messages after netloading and when i type commands of that dll it says unknown command. I tried putting a message box in the initialize of the dll but that message also not showing up.
View 5 Replies View RelatedWhen I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
Is it possible to do actions directly after loading the DVB file by command appload in the autocad command bar?
For example, creating a menu in the menu bar with the available procedures in the .DVB?
Loading an existing batch file to AutoCAD2013 Lt. I have a toolbar that was setup before and I have a new machine, new cad etc and want to get everything back to the way it was.
View 2 Replies View RelatedWhen opening an assembly document via the API (inventorApplication.Documents.Open("path-to-document")), the browser pane and ribbon look like no document has been opened, even though the active environment (inventorApplication.UserInterfaceManager.ActiveEnvironment.DisplayName) is "Assembly".
View 2 Replies View RelatedAfter putting a myPartial.cui file in c:program filesmyfolder, I want to load it automatically at every next AutoCAD startup.
What are the ways to tell AutoCAD to do this task?
Curious as to how to load the 3D Modeling workspace so that I can access the editing features and whatnot without having to type in the commands. I have seen a few different questions dealing with this issue, they pretty much said to into the "custom user interface", click on the transer tab and then path to the support folder where you would load the "acad.cuix" file and drag the 3D Modeling Workspace over to the left hand side. The issue I'm having is that when I path to the folder with all the different ".cuix" files there isn't a plain "acad.cuix" file to be found and none of the other options offer any sort of 3D Modeling Workspace?
View 5 Replies View Relatedstarted a new job after being out of the biz for a couple of years and would like to load some sweet dvb files that I grew accustomed to in my prior life. I can appload my .lsp files with the the best of them but these dang dvb's have me wishin' they were .lsp! The dvb's were at one time lisp routines but were turned into dvbs by a power user somewhere along the line. What's my avenue for success at ever getting to use these sweeties again?
View 9 Replies View Relatedthis newbie question. I could not figure it out how to do this.
I found a sample project named RibbonSample in which by running a command, a new tab will be added to the ribbon.
I am trying to have that tab added upon loading the dll. So I added that command in the constructor of the dll, by "
SendStringToExecute" command. But the new tab did not show up. Then I added the method which creates the tab in the constructor, and I found the same thing. In both cases, when I type the command for creating the ribbon tab, a second tab, along with the first tab I added in the constructor, show up.
So I guess two possible options I have: first, find a way to make the new ribbon tab to be shown at first place, when the dll is loaded. Second, to find a way to postpone running a command added in the constructor of the dll, until the dll is loaded, so it can run like when I type it.
We have about 25 workstations on our partner company, with the exact hardware and software configuration. We have 2 workstations with problem, but the other 23 are fine. The problem is those 2 is taking to long when loading.
I tried to load the program without loading template (startup to 0) it loads fine. The problem starts after it loads template or existing file. I can tell it's not the file problem, because after we open a file successfully, any other file after that opens normally. So there must be another process after loading the first file.
I suspected there is an addon program that cause this. Is there a way we can see what processes are running on command line (like in Windows command console), so we can find what cause this?
I think this might also because they are using ACAD MAP3D 2010, which are not certified for Windows 7 64bit on their machine.
I have started getting the message 'The configured Heidi driver was not loaded. Switching to the default software driver.'
This seems to happen when opening a drawing but sometimes at random.
I have loaded autocad 2013 on several workstations. On one machine, I seem to be having trouble with the .pgp file not loading. Ordinarily when typing in "O", i get offset but for some reason, it changes my cursor to orbit and asks to "select an object".
This is only happening on one machine. Other commands work but customized ones do not.
I need to load 11 xref in my project but seems like in autocad 2013 more than 10 xref is not allowed, it keeps on rejecting the 11th reference without prompting any error.
I have tried to save the drawings in lower version and do the same procedure and it works, i therefore conclude that the issue is with 2013 version.
saving in lower version everytime we receive new xref is really time consuming and painful for hundred of drawings.
I have a user that just recently discovered that the add-in manager does not load any more. I has been working fine for some time.
And I mean that we can't even open the add-in manager. The button is non responsive. I have tried to open it from the windows start menu and I get the message " can't create apprentice server".
Of course this effects all of the ad-ins including the CC and the vault.
I can log in as administrator and everything works fine so the install is good. I'm assuming it's got something to do with his user account settings and on that vein I tried to delete his Autodesk settings in both the registry and his user folder but with no luck.
We are running IV2010
Windows 7 x 64bit.
I am working in AutoCad MEP 2013 and have some drawings where I have xref'd in a tif file for a background. When I initially open the drawing the tif has to be reloaded. If I do this right away after opening the drwing it says it cant be found. If I wait let's say 5-10 minutes and go back and try again then it will load. the tif is set to relative path. It's like the computer is taking a long time to find the file. This is not happening with every drawing in which I have an xref attached to a drawing. Sometimes all the background load immediately and sometimes they behave like this.
View 1 Replies View Related