I just update lightroom to version 3.6 from the last current version. I am on a Mac pro operating system 10.6.8. Everything appeared to be normal until I tried to open an image in the develop module and nothing happens and the program freezes with the lovely spinning rainbow wheel and the program must be forced to quit.
View 21 Replies
Four days ago I updated to LR 3.6. Two days ago I got malware and part of the solution was to System Restore my computer to before the LR 3.6 update. Then I used MalwareBytes to remove the malware. My computer seems to be working fine but now I can't open LR.
On my C: drive I still have LR 3.6 Files but my shortcut to open LR says it is 3.5. I found a LR 3.5.exe file but clicking on it does nothing.
When I open a RAW file in the Develop module ACR dsoes not open. What am I doing wrong?
View 3 Replies View RelatedThis problem started when I updated to Lightroom 3.4 on my new Windows 7 Toshiba Portege R700 laptop. I did not experience it with prior revs of Lightroom 3 on the same laptop. Here are the symptoms:
When I enter Develop, then some of my images stretch upwards when displayed on a second large monitor if the image is as wide as possible, and stretch sideways (inwards) on my laptop monitor if the image is already as tall as the laptop monitor allows. in either case, the image is distorted so that it is appears taller and thinner. When I exit back to Library mode then the image is normal in appearance again.Some images do the opposite and stretch downwards!The files are all RAW. It appears to be a problem only with Olympus RAW (.orf) files and not with Canon RAW (cr2). The same thing happens when I disconnect the secondary display.I can do this multiple times.I took an image, made a virtual copy, reset it and the same thing still happens.There is another similar post where the solution was to start with a fresh preview file. I tried that and it did not work (I closed lightroom, renamed the preview file, and then openned Lightroom again forcing it to create a fresh preview file.One some images, I find that my mask has shifted over. For example, I have an image where I desaturate everything apart from the main figure. Now, the main figure is partially desaturated, as if the mask has moved sideways when I export the image.
When I switch to develop from library the photo won't open. It worked when Installed the program and now it won't
View 19 Replies View RelatedI upgrade to lightroom 5 from lightroom 3. Now all of the develop defaults are "0" for new imported images. In lightroom 3, it would apply default settings at import. In addition, all of my presets are not adjusting exposure/blacks/whites etc like they used to. I am using a Canon XSi. Do I just have something unchecked somewhere?
View 2 Replies View RelatedOK i have been running LR4 fine and upgraded when needed. I'm currently on 4.4 and all has been well until now. When viewing images they don't look sharp! Before when clicking on a thumbnail the image would pop up all fuzzy then get sharp real quick....always has done. This also happens when zooming in to the image, it just looks fuzzy, it does not click into a sharp image to work on, the images come up but don't get sharp. Also there is not always a thumbnail in the top left above the presets. Also if you add a preset the image just disappears!! Sometimes there is just no image at all. I have deleted all references that I can find to LR on my PL including the catalogs and have re loaded LR inc the upgrade plus created a new catalog but the problem still persists.!
View 5 Replies View RelatedAfter successful import, when switching to the Develop module, I receive 'image not found.'The filmstrip at the bottom of the module shows no images. The images are there when I switch back to Library. I have to quit LR4. When I repon the catalog, LR opens to the first image in the Develop module.Mac OS 10.6.8
View 16 Replies View RelatedCannot open basic panel while in the develop module.
View 1 Replies View RelatedLR4 crashes every single time I open Develop. All other parts of LR work but when I click Develop it crashes instantly. Running Windows 7- 64bit
View 1 Replies View RelatedI am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
When I select an upright (portrait) image from library, the develope module displays a distorted landscape view. This happens to every upright file in the folder. Other folders seem to work ok without this problem.
While messing around with image rotate, read metadate, save metadata, etc I managed to make one image open up correctly but I have been unable to recreate that work around. In any case, that fiddly way would take too long as I have hundreds of files to correct!
I normally work with auto rotate ON in the camera.
I just installed Elements 11 and am unable to open it in the develop module in Lightroom 4.3. I am running Windows 8.
View 3 Replies View RelatedWhen I open The Lightroom, I do see the Tabs such as: Library Develop and other Tabs on the Top of page.
When I click on Import and I choose a folder I do see all the pictures of that folder in the middle of the page,,But The Tabs such as Library ,Develop, and other Tabs disappear. I am watching a Video Tutorial and I think I am doing some thing wrong.
I have a bunch of Fuji X-T1 raw images that I have converted to DNG form. Once Lightroom supports X-T1 raw images directly, I would like to replace the DNG files by the corresponding raw files (which I have saved) without having to redo all of my edits.
I've tried an experiment with a NEF file, which Lightroom supports: If I convert it to a DNG file, import the DNG file, then replace the DNG file with the corresponding NEF file, Lightroom still thinks the file is named DNG. This behavior makes me nervous. So what I would like to do is to import all of the Fuji raw files, then transfer the develop settings from each DNG file to the corresponding raw file, then finally archive and delete the DNG files.
Is there any way to do this other than by hand? That is, if I have a folder with a few hundred DNG files, is there any way to tell Lightroom to take the develop settings of every file in the folder and transfer them to the correspondingly named file in the folder of raw files?
way of accomplishing this that does not involve copying and pasting the data for every image by hand?
In Lightroom 5 and 5.2, when using the X key, then Delete Rejected Photos, the central display box no longer displays an image. If I switch back to Library mode an image will appear but if I go back to the Develop module, again it's a blank screen! If not, how do I report this directly to Adobe?
View 12 Replies View RelatedWhy does an image that has been altered by Lightroom cause the RAW Converter to open when trying to view it in Photoshop. Perhaps this might work; if I import, enhance and convert a RAW image in Lightroom to a jepg image it will open in Photoshop without issue. However if I then alter the jpeg image in Lightroom, update the Metadata and try to view it in Photoshop it cause the Photoshop's RAW Converter to open. Is the alter image's information held in a side car file (xmp) that can'r be read by Photoshop? If so would I need to re-export, (convert), the image again in Lightroom to embedd the changes thus making sure it could be read by all the various programs that are available to view images. As is I send photographs to newspapers and print houses it is important for me to know if they would be receiving fully adjusted images or only the adjustments that were made prior to converting from RAW to jpeg. Just in case...I am new to Lightroom.
View 2 Replies View RelatedI've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies View RelatedI've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies View RelatedI have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies View RelatedThe main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedCannot open an updated image with InDesign CS5.5 . How / where do I get upgraded software?
View 1 Replies View RelatedI have operated AutoCAD2011 for at least a couple years with no issues. last week i received a few automatic updates from Windows, and now AutoCAD won't open. what can i do?
View 1 Replies View RelatedI can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies View RelatedFor some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedI updated from Lightroom 4.0 to 4.3. Can I uninstall the 4.0 without affecting the new 4.3 version?
View 1 Replies View RelatedI cannot get LR4 to open images in CS6 using "Edit in". LR opens CS6 with no problem but no image appears. I have tried everything I know - uninstalled both, reinstalled both, cleared out registry, checked I have latest upgrades and both using same ACR (7.2) etc but it still won't work. Using Windows 7 by the way.
View 7 Replies View RelatedI've been running both LR3 and CS5 for months and months, and now suddenly, when I go to "Edit in Photoshop CS5..." an image, it won't open in CS5! It always worked great before. Now, instead, CS5 does nothing, or throws up an open dialogue box of its own. What gives? And, sometimes, after trying to open images to edit them in CS5, I'll notice that CS5 now has, in its "Open Recent..." drop down menu under the File menu, some strange file names with an .ini suffix, or long strings of letters and numbers that mean nothing to me. I'm running Mac OS 10.5.8
View 3 Replies View RelatedDownloaded 4.0 presets fine. Updated to 4.4 and cannot find presets.
View 15 Replies View RelatedI just created a smart collection to take images from a shoot, all of which have a keyword something like
20120403 Sample shoot name
and give me all images from this shoot with 4 or 5 stars. I defined the smart collection with keyword-starting-with that string and rating at least 4. I got all but two of the images. I looked and there was no bug - two images were missing the keyword. When I corrected this, in LR 3 I was accustomed to the dynamic collection's immediate update. However, now in LR 4 (Win 7), the collection didn't update. I tried switching views in Library, such as to the shoot itself, but the collection didn't update. I closed LR and reopened it, and the collection was now updated with all images that should be in it. This appears to be a bug to me.
I updated to 4.3 today and I was still unable to import my D600 NEF/RAW files. After I updated, I rebooted and it seemed like I could actually import the D600 NEF files. However a few moments later, somehow those images were no longer in my catalog/library and when I try to reimport them again it says the files are not compatible and no preview was available during the import screen.
Win 7, 64-bit
