After setting up a layout tab, all of my objects turned light grey. When I went to model space they were the same. if I list an object the color says bylayer but the display (in model space or in paperspace remains grey even afret doing a regen, or closing the drawing and reopening it.
View 3 RepliesHow to turn off osnap for objects under wipeouts?
It is annoying that although the objects under wipeout are not shown, they still become targets of osnap!
When I open up my AutoCad LT some of the items are grey, but when I open the same drawing in my regular autocad everything is in their normal colors. What setting is causing this? See attached picture.
View 8 Replies View RelatedMy current workflow is to design on layers, freezing layers when I'm done working on a portion as to not inadvertently move the contents around. When freezing layers the layers contents are turned grey.
Is there a way to freeze a layer and not have it turn grey?
i know how to turn a grey hair into a blonde..but how do u change it into a black hair?
View 6 Replies View RelatedMy goal is to change all of the objects colors in an xref drawing to gray to use as a background to my work. All changes to the xref drawing were made in the drawing itself, none of this was done in the base drawing.
The quickest way I could find was to change set by layer mode to color only and use set by layer to change all of the objects (select all). This seemed to work fine, until I noticed that certain text would move slightly when the color changed. Long story short this text (single line) moves slightly when the color is changed, even if I select one text and change the color in its properties.
My question is why would text move or change in some way when you only change the color. It doesn't seem to happen to mtext, only dtext.
I'm trying to apply the time remapping settings from my original clips to those that I've colored in DaVinci Resolve. I turned off all effects on my colored clips and graded the entire clip, not just the segment in my original timeline. My workflow thus far has been this:
1) Copy the original clip above the colored clip
2) Revert the speed of the original clip to 100 from where it was adjusted to (the speed of the original clips varies from 500% to 1000% across the timeline)
3) Turn off Time Remapping on the original clips (this is done by deleting all keyframes)
4) Find the In and Out points of the original clip through timecode
5) Set the In and Out points of the colored clip to those of the original
6) Make another copy of the original clip and set it to 100 but don't turn off time remapping
7) Copy the time remapping settings of the original clip to the colored clip
8) Convert the colored clip to the original clip's speed (usually between 500% and 1000%)
Now, in several cases this works, but in others it falls apart at Step 3. When we turn off time remapping, the original clip gets grey stripes over it in the timeline and we cannot see the footage in the Program or Source viewing monitors. We have tried reversing steps 2 and 3, but when we do that the clip gets shrunk down to 1 frame and we lose the original In and Out points.
I have some objects and they have to be black. But if I set te color to #000000 I get some grey color. How I can remove this ?
View 1 Replies View RelatedWindows7 x64, Illustrator CS6 x64, AMD Radeon HD 6770 1Gb.
On creating or moving any objects I have artifacts like this:
They drawing to the right of the cursor till I hold mouse button. After release button they mostly disappeared.
I've got some insulation that is colored white and no matter what white I use or alter the views still show grey. 2011 didn't have this problem as white-flat looked white on screen.
View 1 Replies View RelatedI used by layer and black 250 color also. You can see that the gravel, the concrete foundation and the water hatch is grey.
View 7 Replies View RelatedI have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies View Relatedconverting an object into glass. For example, if I had a digital photo of my head, I want to be able to convert it into what appears to be a solid glass (or ice) sculpture (semitransparent).
View 4 Replies View RelatedIn short I am Trying to assign or attach an existing 3D models Jacket to a Human Character. I have tried many tutorials on youtube but they are all about garment maker clothes not about existing 3D models clothes.
1st- I have a character model with mesh. The mesh his body including trouser (pants) and shirt. The model is biped rigged so works perfect with *.bip animation.
2nd- I have a good looking jacket. Its a original 3d model not made with garment maker.
I tried to attach the jacket as cloth but the jacket did not stay at position when I runplay bip animation, or when I move the model. It seems the jacket is not attached at all as cloth.
I placed the jacket on the character model correctly at position.Then I clicked the MODIFY button.I select in the “modifier list" “cloth”.In “object properties” of cloth I select jacket as “cloth” with presets as “wool”.Then I click “Use Panel Properties”.At add projects I select the other object. And I press “Add”Then I select “Collision Object”.I press “OK”.It seems that the jacket is not attached to the rest of the character mesh or biped.Even when I press “Simulate Local”it does not attach the jacket to the body it miss shapes the jacket.
Ok so I used Image Trace on a .jpeg logo. The logo is black rectangle with white text in it. My problem is that when I traced it, the black space became the object and the letters are negative space. Is there a way to turn the letters into objects?
View 1 Replies View Relatedwhy does Auto Save always turn itself off? This would have to be the most frustrating thing ever, is there an answer to it?
View 9 Replies View RelatedI often draw over topography lines and use them for reference but I don't want to snap to them. Is there any way to view an object and turn off snapping only for that specific object or layer? For instance, can you make frozen layers visible somehow so they can be viewed, but not snapped to? Or is there another way to accomplish this?
View 4 Replies View RelatedI have lots of layers and I need to turn off all of them not one by one.
View 9 Replies View RelatedWhat is the command to turn of fblips in ACAD 2013? In ACAD 2011, you can set BLIPMODE to OFF. But that command is not recognized in 2013.
View 2 Replies View RelatedIf some poor soul decided they didn't want/need them taking up screen real estate, how would said individual permanently disable them?
Tools > Option > Display > Display Drawing Tabs (FILETABCLOSE) works fine for the session, but it's not being remembered between sessions. How to make it leave and never come back.
How do I turn off the defpoints layer so it does not appear when i use the dimension tool while editing a block. I simply want to turn it off so the layer doesn't appear in the layer manager.
View 9 Replies View RelatedHow to "Turn ON" Texture Compression?
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
can I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies View Relatedas a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
I've recently upgraded from AC 2007 on Windows to AC 2013 for MAC. I like all the improvements except for constraints pop up that comes after I make a line or polyline. I have figured out how to temporarily delete them by using DELCONSTRAINT but once I make a new line they return. I would like to permanently turn off the constraints but have not figured out how.
View 3 Replies View Relatedhow to turn off the automatic creation of log files in my drawing folder?
I have unchecked the <Options> <Open and Save> <Maintain a log file> but they just keep on appearing and manually cleaning them out is a real pain...
When I am working with 3D models, autocad keeps changing my ucs by a face I am near. I want to work in the current ucs and not change. How to change this setting?
View 3 Replies View RelatedIs there a way to turn off the stupid "animated" zoom transition that happens during a zoom extents?
View 3 Replies View RelatedEvery time I change views in 2013, new layers added to the drawing turn off. How do I stop this? The active layer also defalts to the active one I started with.
View 1 Replies View Related