My Zoom Extents isn't working right and when I try to plot it says, "No extents in drawing. Could not set plot area to Extents." If I hit OK and go to the Plot Window, Extents isn't an option for the Plot Area and the Plot Scales are way off. I have never seen a drawing that didn't have an extents?
View 9 RepliesThe drawing “zooms to extent” AUTOMATICALLY!
I’m wonder why the attached file zooms to extent AUTOMATICALLY when applying some commands.
For example if I need to use the command “mleaderalign” then the file zooms out AUTOMATICALLY!!!
How to control this very weird behaviour?
Why the file may zoom AUTOMATICALLY?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
How do I select entities by extent. Let's suppose I have Lowerx ,lowery , upperx , uppery [174.76789855957,28.3978977203369 , 507.941253662109 ,112.090751647949 ]. How do I find entities who have these extents.
View 1 Replies View Relatedhow to keep the current zoom scale in (Model) viewport AS IS..the problem is, when i click the other of viewport, the other view zooms to drawing extent..
View 2 Replies View RelatedI am exporting shape files for a GIS user. I am using the correct coordinate system and my units are in feet and decimal degrees. I can export the lines and points with attributes and they import into GIS just fine. When I export a polygon with or without attributes, when i import them into GIS i get the error "One or more of the added layers has an extent that is not consistent with the associated spatial reference."
View 3 Replies View RelatedEventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedI am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.
I don't want any user input, so I see two problems with the routine at the moment.
Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.
Step 4. At the moment it askes the user for a selection, I want it to select "ALL"
;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.
(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)
[Code]...
I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies View RelatedWhen exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
View 6 Replies View RelatedThe layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedSetting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedI want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedI realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedI'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information. I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing. I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad. Is this possible?
View 3 Replies View RelatedI would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
is it possible to change a 'flat' drawing into an isometric type of drawing? I currently have an end view of an item that I need to draw in isometric, but it's fairly detailed with curves etc and will take a long time to draw again from scratch in isometric...
View 7 Replies View RelatedI have two drawings A and B. I work in A and I need some design elements from B.
When I open the drawing B everything I have in drawing A disappeared. I refer to all elements of design (blocks, lines, polylines, etc.).
After studying the issue have concluded that the design of all elements were automatically isolated. Right click> Isolate> End Object Isolation and everything reappears in drawing A.
I mention that I installed Autocad Map 3D 2012 x64 on Windows 7 x64 and work in Map Classic Workspace using the same coordinate system in both drawings.
I downloaded multi-batch as someone here said they like it for batch plotting. Once installed, however, it has changed a setting in AutoCAD. I can no longer open more than one drawing at a time. If I have a drawing open and try to open another drawing it asks me if I want to save the current open drawing.
I can not close a drawing either without exiting AutoCAD or trying to open another drawing. I un-installed multi-batch but it did not fix the problem.
When I open an drawing, AutoCAD opens *two* drawings, the one I wanted *plus* a new one (called drawing 1.)Why does this happen and can it be prevented?
View 6 Replies View RelatedI am editing an existing block to change the lineweight and have tried using the REFEDIT command as well as double clicking the block to take me into the block editor and making my changes there. I am sucessfully able to edit my block and make the changes using both of these methods. Where I am running into an issue is that the block I have edited only retains its new settings within the drawing that I changed it in. If I insert that same block into a new drawing I have to re-edit the block again the make the changes that I want. Why are my blocks not retaining their settings from drawing to drawing.
View 9 Replies View RelatedI am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
I have survey points in drawing A. I want those points to be available for drawing B. How do I do this?
(Coming from LDD where points were project based not drawing specific).
I am self taught on acad 2008, and have created a complex 3d drawing over the last year or so. But I need it to be represented in a mechanical drawing. I tried flatshot, but this is not true to form. Is there a way to do this? (an easy way)
View 9 Replies View RelatedI have a user that is having a problem with two particular drawings within AutoCAD.
drawing 1 is 4MB
drawing 2 is 17MB
I believe he is attempting to copy some data from drawing 2 to drawing 1.
*nearly* Everytime he opens these two files and switches to 'Model' autocad crashes displaying the message -
--------------------------- AutoCAD LT Alert ---------------------------
AutoCAD LT cannot continue. You can attempt to save changes into the following file up to the start of the last command: S:****************
After you save your changes, you can open or recover the file.
Should AutoCAD LT try to save your changes?
--------------------------- Yes No ---------------------------
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedI want to take two 3D views from (autodesk) Revit Architecture 2012 to Illustrator CS5 and then make use of the live paint bucket tool*. I've printed the two 3D views into pdf files and imported them in Illustrator**. When I select the whole image in Illustrator and then click with the Live Paint Bucket tool on the drawing to modify the drawing so I can color the surfaces, Illustrator gives me the following error:
"The selection contains objects that cannot be converted. Live Paint groups can only contain paths and compound paths. Clipping paths are not allowed."
Exporting images (jpg, png and tiff) from Revit results in the same error. Is there a way to easily convert my vector drawing into a non-clipping paths drawing? Also I'm not sure if the problem should be found in either Revit or Illustrator. What's also strange is that I'm using a tutorial provided by my university, in which there are no issues with clipping paths or anything.
* This in order to make an conceptual image of my building, which I've modeled in Revit. I want to add basic colors to surfaces in Illustrator and then take the image to Photoshop to add shadow, materials, sky etc.
** They only consist of lines, using the 'hidden line' visual style in my views in Revit, in case you know a bit of Revit.
Sometimes, when I have two or more drawings open in the same instance of AutoCAD, another tab opens up on the Windows Taskbar. Here's the scenerio; I have two drawings open. On the task bar, Autocad's icon shows two drawings open. Somewhere while drawing, AutoCAD will start bogging down, especially when switching drawings. On the Window's Taskbar, it will now show three drawings open. Two of which will be the same drawing. There will only be two drawings open. The drawing which is currently on top for editing will be the one that shows up twice. If I change to the other drawing, it takes a really long time to swap. Sometimes, it will sit there for a minute and then swap back to the other first drawing on it's own. I try going back to the second drawing again, and the same thing happens again. The only way to stop this from happening is to completely shut down AutoCAD and restart it. I think it has something to do with the ribbon. And I also notice it more often after doing a CopyBase, but not always.
View 1 Replies View Related