AutoCAD 2010 :: Drawing Window Swaps On It Own To Another Drawing Window
Jul 24, 2012
Sometimes, when I have two or more drawings open in the same instance of AutoCAD, another tab opens up on the Windows Taskbar. Here's the scenerio; I have two drawings open. On the task bar, Autocad's icon shows two drawings open. Somewhere while drawing, AutoCAD will start bogging down, especially when switching drawings. On the Window's Taskbar, it will now show three drawings open. Two of which will be the same drawing. There will only be two drawings open. The drawing which is currently on top for editing will be the one that shows up twice. If I change to the other drawing, it takes a really long time to swap. Sometimes, it will sit there for a minute and then swap back to the other first drawing on it's own. I try going back to the second drawing again, and the same thing happens again. The only way to stop this from happening is to completely shut down AutoCAD and restart it. I think it has something to do with the ribbon. And I also notice it more often after doing a CopyBase, but not always.
View 1 Replies
ADVERTISEMENT
Nov 12, 2009
I have a drawing that will not open the objectscale window (annotative scale add/delete). I either select from the right-click menu, or type in objectscale, and nothing happens. I opened a new drawing and the function worked fine in that one, just not in my existing drawing...
View 2 Replies
View Related
Nov 15, 2012
I am looking for an example autocad drawing of the connection between a window and a wall. In other words, a drawing which shows how the window is attached to the wall.
Does not matter what kind of window, materials etc.
View 7 Replies
View Related
Sep 13, 2011
An example is when I'm drawing a box, line etc and attempt to type "@5,-5", AutoCAD somehow jumps to a window on the side and if I don't notice will restore the window I'm working in and not complete the command I typed ("@5,-5" in this case). If I do notice in time, then I have to pres ESC about 3-4 times, which will then have me back on the command line with the text "@5,-" already typed (as if that was were I paused while typing??). The attached picture shows the dialog box on the top left, and the command line as if I've only typed "@", when after pressing ESC as mentioned the full "@5,-" text becomes visible on the command line?
Also, as a note: I've already ruled out that I'm pressing other keys that could possibly cause this...
I'm running AutoCAD (Mechanical) 2011
View 9 Replies
View Related
Apr 10, 2012
My AutoCAD 2012 installation has been doing this for a while, but I don't remember it always doing this:
After I close a drawing (if it is the last drawing open), by using either the "close" command or by clicking the "x" on the window, instead of going to the generic gray-stripe background it just shows what the drawing looked like before close. This keeps messing with my head, as I think AutoCAD has just stopped responding.
If you look closely, though, you can see that the "AutoCAD" and "Autodesk" labels appear on the drawing, but I don't immediately notice this because my drawings are more complex than the sample drawing I've attached.
See images below.
However, when I manually resize the application window (either by restoring or maximizing, or by draging the window edge, the application window refreshes to show the proper generic gray-stripe background.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 9 Replies
View Related
Jul 16, 2013
In AutoCAD LT 2013, whenever I open a drawing I previously created and stored, it opens with a small amout of the bottom of the drawing below the bottom border of the window. Repeatedly I have tried positioning the drawing the way I would like it to open then saving that configuration. That's how I always did it in AutoCAD 2000, my previous version. Regardless how many times I go thru that process, all drawings always open centered horiz'ly but with the bottom bit of the drawing below the bottom border of the window.
I constantly look for a "Center Drawing In Window" button, or "Save Current View" button and so far have found nothing I recognize as such or even close. Am I looking for something that doesn't exist? Am I not understanding how it works? In the grand scheme it really doesn't matter because it's simple to pan the drawing into a fully readable scene - but I am still curious.
View 3 Replies
View Related
Jun 15, 2011
how to suppress the Data Window from appearing after drawing a new feature? Most of the new features are populated with triggers and autonumbers, so I don't need to see the Data Window when I draw something new..
View 1 Replies
View Related
Apr 8, 2013
If there's a conflict between the UI for teh AutoCAD drawing window and Parallels? There seems to be a consistent change in mouse behavior when the mouse moves to the AutoCAD drawing window when running AutoCAD ('11, '12, '13, '14) under Parallels (5, 6, & 7).
Since Parallels is now officially supported.
View 6 Replies
View Related
Aug 1, 2012
Is there a way so that in the window Detail View,
I will permenantly get a
Fenche Shape: rounded
cutout Shape: Rounded
Disyplay full Detail Boudary: at on
Display connection line: at on
Unless, I have to change them each time...
View 1 Replies
View Related
May 3, 2012
All of a sudden my cursor will become invisible. This happens only with AutoCAD. and if I switch between drawing windows it will appear on another drawing file. I have to close the drawing and open it again and then the cursor will be back only to disappear again. The cursor is visible if I move it back to the ribbon or bottom controls. It seems to happen only when it becomes the cross-hair cursor. I can still make selection windows and right click.
Mouse is working fine with all other programs and drivers are up-to-date.
View 9 Replies
View Related
Feb 26, 2013
Is there a shortcut combo to bring up the drawing properties window? I want a quicker way to edit custom fields.
View 2 Replies
View Related
Feb 5, 2013
A co-worker asked how to display the full drawing path in the window header. He said that it used to, now doesn't. I have never seen the full path of the drawing in the header before. Mine just says "AutoCAD Civil 3D 2013 (Drawing File Name) [Project Folder]"
I checked in Options, but didn't see anything.
View 1 Replies
View Related
Feb 12, 2013
We have a large project that we converted from 2012 to 2013 - it had always been a little buggy in 2012 as it was a piece together from another consultant. Now though, it is extremely slow and there seems to be a 'block reference' around every block in the drawing. You can drag your select window and they all pop up like crazy and slow things down immensely (see screen capture). You can select them individually, they have nodes on all 4 corners and to move them, scales your block up and down. I tried block replace to our blocks which we know are fine and same problem. It also seems to be drawing specific although audit is clean.
View 9 Replies
View Related
Jun 14, 2013
I am writing a LISP program to generate development of surfaces. Once the entire drawing is completed, I want that the input data to be displayed on drawing window as text.
View 2 Replies
View Related
Jun 1, 2012
I use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.
View 9 Replies
View Related
Oct 17, 2013
suddenly Photoshop CC seems to be broken. When using selection- or drawingtools, the documentwindow where I draw starts flashing black frames while drawing and sometimes the frame even stays black.
It's really odd, 'cause this Photoshop version used to work fine.Updating the version to the latest version (14.1.2 x64) didn't fix the problem. I use Windows8.
I don't believe any of the videodrivers were updated recently, but I will check that too.
View 4 Replies
View Related
Sep 22, 2011
After using the program for a few weeks it appeared the error message "An error has occurred while drawing the contents of this window" only when I open the 3D view. I reset the Windows user profile and everything is back to normal operation. Today has come out again this error screen. Video drivers are certified and the board is a Nvidea Quadro and normally I have no problems. To test I created a new user and everything works fine.What could alter the software related to user profile?
View 6 Replies
View Related
Jun 19, 2012
I was interested in finding out if it's possible to write a LISP routine that would execute a pop-up dialog box say every 30 minutes. This is strictly for ergonomic reasons to remind the user to take a pre-determined break.
I am not an expert code writer by any means, but I imagine the routine would autoload and resetting the timer to 0 upon opening a particular drawing file. The LISP routine would then run in the background and run the (alert "") command when the timer reaches 30m 0s. When the user presses the OK button, the timer resets to 0 again.
View 9 Replies
View Related
Dec 19, 2012
Is there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
View 1 Replies
View Related
Dec 10, 2013
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
View 5 Replies
View Related
Sep 11, 2012
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies
View Related
Mar 11, 2013
As a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
View 2 Replies
View Related
Jul 25, 2012
I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies
View Related
Sep 14, 2013
I modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
The file is attached.
View 2 Replies
View Related
Apr 17, 2013
How do I change Gimp from a Multi-window view to a single window view?
View 7 Replies
View Related
Feb 6, 2014
In the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies
View Related
Apr 5, 2012
I have just installed my newly purchased PSC5 extended software. When I try to use the ACR it will load and I can use it but when I try to open, save or cancel my image I cannot. This is because the ACR window is too 'long' for my Sony desktop window and the buttons I am trying to access are in the 'shadow' of the desktop window. When I try to resize the ACR window to access the buttons it will let me adjust it on the vertical window edges but not on the horizontal window edges. I have to reboot the laptop to do anything at all.
View 8 Replies
View Related
Sep 26, 2011
I know that the (graphscr) command will change the focus of ACAD from the text window to the graphics screen, but is there a command line option to actually turn off the text window?
View 9 Replies
View Related
Jun 5, 2013
Im running Window 7 and autocad 2010. I use window explorer to open dwg files. When i open a new file, it always opens in a new autocad window.
View 4 Replies
View Related
Sep 18, 2012
I can press F2 to open the AutoCAD Text Window, but I'm looking for a reliable way to close it once it's open. If it's not overlapping with AutoCAD, F2 doesn't close it. I currently have it on a monitor other than the monitor AutoCAD is on.
Is there a system variable I can use to setup a LISP to toggle (or at least close) the Text Window using a keyboard shortcut?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 7 Replies
View Related
Jun 16, 2013
That's the problem, I can't see the colored window when I go over my selection, I checked the options and I see everything seems OK...
View 2 Replies
View Related
