Photoshop :: CC Suddenly Flashes Document Window During Drawing?
Oct 17, 2013
suddenly Photoshop CC seems to be broken. When using selection- or drawingtools, the documentwindow where I draw starts flashing black frames while drawing and sometimes the frame even stays black.
It's really odd, 'cause this Photoshop version used to work fine.Updating the version to the latest version (14.1.2 x64) didn't fix the problem. I use Windows8.
I don't believe any of the videodrivers were updated recently, but I will check that too.
View 4 Replies
ADVERTISEMENT
Feb 12, 2013
I purchased an update for PSCS6 disc. Whenever I use a slider in editing (such as adjusting hue, contrast, etc.) the background on my screen flashes back and forth between black and grey/checkerboard! It does this as I slide the slider in all adjustments! It is impossible to edit with this flashing! I have set the background to black, but it will not stay there. I have downloaded all the current drivers for my computer. Nothing works!
View 3 Replies
View Related
Nov 14, 2013
My company bought the photoshop CC for my work and my notebook, where the photoshop was installed, have Windows 8. The problem is: when I go to move some element in the document (Ctrl+T), make a selection or move the document (Space+Click) the screen flashes black, and sometimes it turns black and don't go back until I move the document.
when I'm going to move a layer to some part of the document the screen keeps flashing black until I finish it.The difference is, in the Windows 7 it doesn't happen at all, the photoshop runs beautifully. It just happens in Windows 8.
Notebook specs:
Windows 8
Intel I5 3230M
6gb RAM
500GB HD
View 1 Replies
View Related
Nov 22, 2013
using PS CS3 on mac 10.8.6 - been fine for years and was OK two days ago. Now when I open it I get a blank window (just the yellow dot upper left) and all else is frozen - can't even quit. Used 'force quit' which works but does NOT say that it is not responding.
Tried rebooting and restarting etc - no change.I know its old but it was fine for my purposes - and I have not changed anything.
View 2 Replies
View Related
Jul 24, 2012
Sometimes, when I have two or more drawings open in the same instance of AutoCAD, another tab opens up on the Windows Taskbar. Here's the scenerio; I have two drawings open. On the task bar, Autocad's icon shows two drawings open. Somewhere while drawing, AutoCAD will start bogging down, especially when switching drawings. On the Window's Taskbar, it will now show three drawings open. Two of which will be the same drawing. There will only be two drawings open. The drawing which is currently on top for editing will be the one that shows up twice. If I change to the other drawing, it takes a really long time to swap. Sometimes, it will sit there for a minute and then swap back to the other first drawing on it's own. I try going back to the second drawing again, and the same thing happens again. The only way to stop this from happening is to completely shut down AutoCAD and restart it. I think it has something to do with the ribbon. And I also notice it more often after doing a CopyBase, but not always.
View 1 Replies
View Related
Apr 10, 2013
Last week everything was working fine, this week my render window in vacation. Or something.Hit Render frame or even IPR (doesn't matter what renderer I use) and no render window pops up to chew on the image. I get a progress bar and the .IFF is saved in my project folder, but no render window. No error messages that I can see either, maybe I'm not looking in the right place.
View 2 Replies
View Related
Mar 3, 2014
All of the sudden I can't create a customer profile when creating a new document. Earlier I selecting the print profile. I tried opening a new document and creating a custom profile but that option is grayed out.
I created custom brushes yesterday but they don't appear today. Is that because of the profile that the brushes were created with and without that profile I won't see the brushes?
View 5 Replies
View Related
Feb 11, 2013
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies
View Related
Nov 9, 2004
when you do a FILE > OPEN and the image comes up, it is contained in the DOCUMENT WINDOW, no?
I noticed that if you press CTRL and + you zoom in, and CTL and - then you zoom out. But the document window seems to ignore the palettes on the right hand side of the application.
Is there any way to make Photoshop not extend the document window so that it resides partially behind the palettes?
I notice that if you press CTRL + ALT and + then you zoom in WITHOUT modifying your document window (same for CTRL + ALT and -) , but I cannot see how to remap CTRL and + to what CTRL+ALT and + does.
View 8 Replies
View Related
Oct 24, 2006
All options are greyed out and unselectable along with all menu options, and the x to close the program. Nothing appears, but I know that it is waiting for me to specify size and type becuase if i press new document, and just press enter, a new document appears. Has anyone had this problem before? Please help it is cripling me, and I cannot do anything in photoshop.
View 3 Replies
View Related
Nov 8, 2012
My copy of PS CS6 has problems sizing the document window. In Standard Screen mode it does not enlarge the window to fit the screen.
In Full Screen Mode (with and without Menu Bar) it will not size the image to fit the screen. The gray area extends way below the bottom of the display and does not have the bar containing size percentage and other information at the bottom.
I have the impression Photoshop does not read the display's size information and therefore doesn't know what to do. It's an Apple Cinamea 23" display. ATI Radeon HD 4870 video card. OS X 10.6.8.
View 2 Replies
View Related
Nov 8, 2008
In CS3, the document window abutted the palette (panel) stack and expanded automatically when I collapsed the stack. How do I make CS4 (Windows XP) do this?
View 5 Replies
View Related
Sep 9, 2008
I have several photoshop documents open.I maximize my current document by clicking the maximize button.. when i minimize that document and got to the next I have to maximize the next document and etc. Is there a shortcut that will maximize all the document windows , that way when i minimize one the other document is maximized as well?
View 1 Replies
View Related
Apr 28, 2012
Everytime I open a document in Photoshop CS5, these 2 dialog boxes (Image Size, Script Alert) would pop up. to cancel 2 times to start editing. Is there a setting I can disable this?
View 3 Replies
View Related
Dec 9, 2012
When I try and move a corner of my open document with the hand tool to the center of the document window in CS5 when zoomed out, it stops at the edges and will not move inward any further. It is sometimes more convenient to be able to work on a zoomed in corner of a document when it is centered in the document window. If I go to the rotate tool and set a slight angle, I can then move the document anywhere in the window at any magnification! Is there a setting that is locking the document at the edge of the screen when zoomed out?
View 7 Replies
View Related
Jul 7, 2013
I set the document.window.text="aa" what i want
However, when the state of window the window is changed the text is re over to the document full name. I also use the AcadDocument WindowChanged event,but it is not use.
View 5 Replies
View Related
Jun 14, 2012
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies
View Related
Jul 23, 2013
Using Illustrator CS6 for Windows, when I open a document and then open a second window (Window > New Window), I can show rulers (View > Rulers > Show Rulers) in one window without affecting the behavior of the other.
I can also hide edges (View > Hide Edges) in just one window, but not the other. I can even show the transparency grid (View > Show Transparency Grid) in one window, but not the other.
This is all as expected, and very useful when I keep one window on my working monitor and drag the other window to the monitor my client is watching.
The problem is this: when hide or show the bounding box (View > Hide/Show Bounding Box), it affects both windows. Furthermore, it affects all open documents--not just multiple windows belonging to one document.
This is maddening--is there some way I can restrict that change to just one window? I can't imagine why other View options are per-window, but this View option is application-wide.
TL;DR: In Illustrator CS6 for Windows, how can I hide the bounding box in one and only one document window?
View 1 Replies
View Related
Sep 20, 2012
I'm trying to change the active document window size with vb.net. This seems like it should be straightforward, but I'm having some trouble. Below is some code that I tried to use which I found on the AutoCAD DevBlog.. I thought I understood how this works, but I can't seem to import the correct references to make it work.
Dim doc As Document = Application.DocumentManager.MdiActiveDocument()
Dim docWindow As Window = doc.Window
Dim size As Size = docWindow.Size
docWindow.WindowState = Window.State.Normal
docWindow.Size = New Size(500, 500)
View 4 Replies
View Related
Apr 26, 2012
I closed a document in AI CS5. Now when I try to reopen it, I get an error message about there not being enough room in the window, increase document area. How do I do that since I can't get the file opened? Am I doomed to having a file that can no longer be opened?
View 5 Replies
View Related
Dec 13, 2012
When you open a file or import a file the preview window image is blurred. It was not that way in X5.
View 1 Replies
View Related
Mar 3, 2013
I using a trial version of CS 6 on windows 8 pro. I keep getting flashing in the work space / background when I zoom or move an image around (only some images not all). When I zoom or move an image around the background changes from transparent to various shades of gray to black. I was getting it with selections but after making some changes in Catalyst I fixed it. I have the latest driver for my card. I won't purchase it until this issue is resolved. I see many others have the same issue. It's been a long time since CS6 came out and I'm concerned this won't be fixed. I can just continue to use an older version if need be. I don't want to have to buy another video card just to use PS CS6 properly. If I turn off "Use Graphics Card" it seems fine.This card works fine with other versions so what had changed. At $700 I expect to be able to use it with my video card (AMD Radeon HD 6450) which is not too old.
View 1 Replies
View Related
Mar 12, 2006
I want to do is put some white flashes down the side of a car but how do I do this so you can still see the contours of the car?
also I would like to change the colour of the car (blue to red) but when I have tried this it changes the hole picture (makes everything seem red)
View 1 Replies
View Related
Oct 7, 2004
I've got an image of a guy in mid-air, halfway through a lay up (actually, the model was standing on a table, but that's neither here nor there!)
I separated him from the background, so the only thing I have is the model and the net on a black background, as if the image was a close-up photo. What I'd really like to do is add camera flashes to the background, so it looks like there's a huge crowd snapping pictures of the layup.
I've attached a small version of the picture so you'll have a better idea what I'm talking about.
View 5 Replies
View Related
Oct 14, 2013
I was using Photoshop CC / I was editing an image, but when use the text tool my image starts flashing black randomly once I move the mouse and stays black when I stop moving.
View 1 Replies
View Related
Dec 11, 2012
I notice the tranparent background flashing intermittently when I zoom or use any of the functions like layers, levels etc. I am using a new Win 8 system and have updated both photoshop CS6 and my video card drivers.
View 2 Replies
View Related
Oct 7, 2013
Here is a video i took of the problem
[URL].........
How can I get it to stop. It is almost impossible to use the text tool. I am using Photoshop cs6 on window's 8.
View 8 Replies
View Related
Feb 18, 2013
the picture flashes when using quick select in PS6 with Windows 8, AMD video card with latest drivers.
View 4 Replies
View Related
Dec 28, 2012
I'm new to CS6 and WIN8. When I Open an image from ACR in 16-bit TIFF and select a tool in Image>Adjustment and begin processing, the background changes from gray to a flashing white checkerboard pattern and the images disappears. What have I missed in the setup?
View 3 Replies
View Related
Mar 6, 2013
Photoshop cs6 extended (64bit) flashes black when clicking on canvas or on a layer. I can't get anything done, I have already uninstalled and reinstalled... all other Creative Cloud apps work fine. I'm using windows 8.
View 4 Replies
View Related
Feb 18, 2012
I'm new to illustrator, how to I put a text string on a document.
View 4 Replies
View Related
