I have several photoshop documents open.I maximize my current document by clicking the maximize button.. when i minimize that document and got to the next I have to maximize the next document and etc. Is there a shortcut that will maximize all the document windows , that way when i minimize one the other document is maximized as well?
View 1 RepliesI would like to have a shortcut to fit a window (regardless of the image size)
between the tool box on the left and the other pallettes on the right. The only way I do it now is to drag the window to the upper left starting point and then drag the lower right corner to size it.
when you do a FILE > OPEN and the image comes up, it is contained in the DOCUMENT WINDOW, no?
I noticed that if you press CTRL and + you zoom in, and CTL and - then you zoom out. But the document window seems to ignore the palettes on the right hand side of the application.
Is there any way to make Photoshop not extend the document window so that it resides partially behind the palettes?
I notice that if you press CTRL + ALT and + then you zoom in WITHOUT modifying your document window (same for CTRL + ALT and -) , but I cannot see how to remap CTRL and + to what CTRL+ALT and + does.
All options are greyed out and unselectable along with all menu options, and the x to close the program. Nothing appears, but I know that it is waiting for me to specify size and type becuase if i press new document, and just press enter, a new document appears. Has anyone had this problem before? Please help it is cripling me, and I cannot do anything in photoshop.
View 3 Replies View RelatedWhen I use the brush tool with scattering set to maximum, the range of scattering is still pretty narrow. I mean, it could be set to 1000% scattered, and the points I draw will still only be with a few pixels from my cursor (about 20 pixels or so). Is there a way to set scattering even more than this?
View 8 Replies View RelatedMy copy of PS CS6 has problems sizing the document window. In Standard Screen mode it does not enlarge the window to fit the screen.
In Full Screen Mode (with and without Menu Bar) it will not size the image to fit the screen. The gray area extends way below the bottom of the display and does not have the bar containing size percentage and other information at the bottom.
I have the impression Photoshop does not read the display's size information and therefore doesn't know what to do. It's an Apple Cinamea 23" display. ATI Radeon HD 4870 video card. OS X 10.6.8.
In CS3, the document window abutted the palette (panel) stack and expanded automatically when I collapsed the stack. How do I make CS4 (Windows XP) do this?
View 5 Replies View RelatedIs there any way to create an action or keyboard shortcut to set the Crop tool to the front window size in Photoshop CS6? I find that I use that several times a day. I got used to it being the top choice in the Crop tool presets menu.
View 3 Replies View Relatedsuddenly Photoshop CC seems to be broken. When using selection- or drawingtools, the documentwindow where I draw starts flashing black frames while drawing and sometimes the frame even stays black.
It's really odd, 'cause this Photoshop version used to work fine.Updating the version to the latest version (14.1.2 x64) didn't fix the problem. I use Windows8.
I don't believe any of the videodrivers were updated recently, but I will check that too.
Is there a shortcut combo to bring up the drawing properties window? I want a quicker way to edit custom fields.
View 2 Replies View RelatedIs there any way to create a keyboard shortcut to put focus on the image window? I see how to create shortcuts to select every window except the image window, and it if I could just select the image window with a keyboard shortcut, GIMP would be much easier for me to use.
Also is there a way to create a keyboard shortcut to toggle the visibility of a layer?
Everytime I open a document in Photoshop CS5, these 2 dialog boxes (Image Size, Script Alert) would pop up. to cancel 2 times to start editing. Is there a setting I can disable this?
View 3 Replies View RelatedI am trying to burn VSP projects on Blu-ray discs with the highest quality video possible using VSPx4. I am using video clips from an HD camcorder with frame size 1920 x 1080 and 59.94 fps but when I try to modify the project settings I am unable to change frame size higher than 720 x 480 or 29.97 fps and I'm not sure why. However, after I click share and click to burn a Blu-ray I can open the settings in the new window and change the frame size to 1920 x 1080 but I still cannot increase the speed to 59.94 fps. My first question is do I need to change my project settings while working on the project or is it enough to change the settings after I click to burn the Blu-ray and the second question is can the fps be increased to 59.94?
View 7 Replies View RelatedWhen I try and move a corner of my open document with the hand tool to the center of the document window in CS5 when zoomed out, it stops at the edges and will not move inward any further. It is sometimes more convenient to be able to work on a zoomed in corner of a document when it is centered in the document window. If I go to the rotate tool and set a slight angle, I can then move the document anywhere in the window at any magnification! Is there a setting that is locking the document at the edge of the screen when zoomed out?
View 7 Replies View RelatedThe short cut key to maximize actions outputs was Ctrl + C. What is it now?
View 4 Replies View RelatedI set the document.window.text="aa" what i want
However, when the state of window the window is changed the text is re over to the document full name. I also use the AcadDocument WindowChanged event,but it is not use.
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies View RelatedUsing Illustrator CS6 for Windows, when I open a document and then open a second window (Window > New Window), I can show rulers (View > Rulers > Show Rulers) in one window without affecting the behavior of the other.
I can also hide edges (View > Hide Edges) in just one window, but not the other. I can even show the transparency grid (View > Show Transparency Grid) in one window, but not the other.
This is all as expected, and very useful when I keep one window on my working monitor and drag the other window to the monitor my client is watching.
The problem is this: when hide or show the bounding box (View > Hide/Show Bounding Box), it affects both windows. Furthermore, it affects all open documents--not just multiple windows belonging to one document.
This is maddening--is there some way I can restrict that change to just one window? I can't imagine why other View options are per-window, but this View option is application-wide.
TL;DR: In Illustrator CS6 for Windows, how can I hide the bounding box in one and only one document window?
I'm trying to change the active document window size with vb.net. This seems like it should be straightforward, but I'm having some trouble. Below is some code that I tried to use which I found on the AutoCAD DevBlog.. I thought I understood how this works, but I can't seem to import the correct references to make it work.
Dim doc As Document = Application.DocumentManager.MdiActiveDocument()
Dim docWindow As Window = doc.Window
Dim size As Size = docWindow.Size
docWindow.WindowState = Window.State.Normal
docWindow.Size = New Size(500, 500)
I closed a document in AI CS5. Now when I try to reopen it, I get an error message about there not being enough room in the window, increase document area. How do I do that since I can't get the file opened? Am I doomed to having a file that can no longer be opened?
View 5 Replies View RelatedWhen you open a file or import a file the preview window image is blurred. It was not that way in X5.
View 1 Replies View RelatedIs there a way to add a keyboard shortcut or marking menu shortcut for visibility? It would be really convenient to be able to shift-click several objects and toggle the visibility of them. I have a mouse with numerous buttons that are mapped to commonly used IV features, but I cannot find a way to map a visibility toggle.
View 9 Replies View RelatedI've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Relatedas of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
I have just installed my newly purchased PSC5 extended software. When I try to use the ACR it will load and I can use it but when I try to open, save or cancel my image I cannot. This is because the ACR window is too 'long' for my Sony desktop window and the buttons I am trying to access are in the 'shadow' of the desktop window. When I try to resize the ACR window to access the buttons it will let me adjust it on the vertical window edges but not on the horizontal window edges. I have to reboot the laptop to do anything at all.
View 8 Replies View RelatedThe code below crashes with an "attempt to write to protected memory" in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies View RelatedAs a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
View 2 Replies View RelatedI modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
The file is attached.
How do I change Gimp from a Multi-window view to a single window view?
View 7 Replies View Related