Photoshop :: Keeping My Document Window Where It Is
Nov 9, 2004
when you do a FILE > OPEN and the image comes up, it is contained in the DOCUMENT WINDOW, no?
I noticed that if you press CTRL and + you zoom in, and CTL and - then you zoom out. But the document window seems to ignore the palettes on the right hand side of the application.
Is there any way to make Photoshop not extend the document window so that it resides partially behind the palettes?
I notice that if you press CTRL + ALT and + then you zoom in WITHOUT modifying your document window (same for CTRL + ALT and -) , but I cannot see how to remap CTRL and + to what CTRL+ALT and + does.
View 8 Replies
ADVERTISEMENT
Nov 20, 2013
When trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies
View Related
Oct 24, 2006
All options are greyed out and unselectable along with all menu options, and the x to close the program. Nothing appears, but I know that it is waiting for me to specify size and type becuase if i press new document, and just press enter, a new document appears. Has anyone had this problem before? Please help it is cripling me, and I cannot do anything in photoshop.
View 3 Replies
View Related
Nov 8, 2012
My copy of PS CS6 has problems sizing the document window. In Standard Screen mode it does not enlarge the window to fit the screen.
In Full Screen Mode (with and without Menu Bar) it will not size the image to fit the screen. The gray area extends way below the bottom of the display and does not have the bar containing size percentage and other information at the bottom.
I have the impression Photoshop does not read the display's size information and therefore doesn't know what to do. It's an Apple Cinamea 23" display. ATI Radeon HD 4870 video card. OS X 10.6.8.
View 2 Replies
View Related
Nov 8, 2008
In CS3, the document window abutted the palette (panel) stack and expanded automatically when I collapsed the stack. How do I make CS4 (Windows XP) do this?
View 5 Replies
View Related
Sep 9, 2008
I have several photoshop documents open.I maximize my current document by clicking the maximize button.. when i minimize that document and got to the next I have to maximize the next document and etc. Is there a shortcut that will maximize all the document windows , that way when i minimize one the other document is maximized as well?
View 1 Replies
View Related
Oct 17, 2013
suddenly Photoshop CC seems to be broken. When using selection- or drawingtools, the documentwindow where I draw starts flashing black frames while drawing and sometimes the frame even stays black.
It's really odd, 'cause this Photoshop version used to work fine.Updating the version to the latest version (14.1.2 x64) didn't fix the problem. I use Windows8.
I don't believe any of the videodrivers were updated recently, but I will check that too.
View 4 Replies
View Related
Apr 28, 2012
Everytime I open a document in Photoshop CS5, these 2 dialog boxes (Image Size, Script Alert) would pop up. to cancel 2 times to start editing. Is there a setting I can disable this?
View 3 Replies
View Related
Dec 9, 2012
When I try and move a corner of my open document with the hand tool to the center of the document window in CS5 when zoomed out, it stops at the edges and will not move inward any further. It is sometimes more convenient to be able to work on a zoomed in corner of a document when it is centered in the document window. If I go to the rotate tool and set a slight angle, I can then move the document anywhere in the window at any magnification! Is there a setting that is locking the document at the edge of the screen when zoomed out?
View 7 Replies
View Related
Jul 7, 2013
I set the document.window.text="aa" what i want
However, when the state of window the window is changed the text is re over to the document full name. I also use the AcadDocument WindowChanged event,but it is not use.
View 5 Replies
View Related
Jun 14, 2012
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies
View Related
Jul 23, 2013
Using Illustrator CS6 for Windows, when I open a document and then open a second window (Window > New Window), I can show rulers (View > Rulers > Show Rulers) in one window without affecting the behavior of the other.
I can also hide edges (View > Hide Edges) in just one window, but not the other. I can even show the transparency grid (View > Show Transparency Grid) in one window, but not the other.
This is all as expected, and very useful when I keep one window on my working monitor and drag the other window to the monitor my client is watching.
The problem is this: when hide or show the bounding box (View > Hide/Show Bounding Box), it affects both windows. Furthermore, it affects all open documents--not just multiple windows belonging to one document.
This is maddening--is there some way I can restrict that change to just one window? I can't imagine why other View options are per-window, but this View option is application-wide.
TL;DR: In Illustrator CS6 for Windows, how can I hide the bounding box in one and only one document window?
View 1 Replies
View Related
Sep 20, 2012
I'm trying to change the active document window size with vb.net. This seems like it should be straightforward, but I'm having some trouble. Below is some code that I tried to use which I found on the AutoCAD DevBlog.. I thought I understood how this works, but I can't seem to import the correct references to make it work.
Dim doc As Document = Application.DocumentManager.MdiActiveDocument()
Dim docWindow As Window = doc.Window
Dim size As Size = docWindow.Size
docWindow.WindowState = Window.State.Normal
docWindow.Size = New Size(500, 500)
View 4 Replies
View Related
Apr 26, 2012
I closed a document in AI CS5. Now when I try to reopen it, I get an error message about there not being enough room in the window, increase document area. How do I do that since I can't get the file opened? Am I doomed to having a file that can no longer be opened?
View 5 Replies
View Related
Dec 13, 2012
When you open a file or import a file the preview window image is blurred. It was not that way in X5.
View 1 Replies
View Related
Nov 5, 2013
I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
View 1 Replies
View Related
Nov 23, 2013
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies
View Related
Jul 5, 2013
as of yesterday i have been receiving an alert when i try to move a jpeg into a new photoshop doc stating that my target document has a different depth than my source document and will (which it definiately does) result in lower than expected quality.
Photoshop specs: CS6; RGB; 16 bit; Res 300 pixels/inches; size: letter; (advanced setting - don't know what these are) color profile: sRGB IEC61966-2.1; Pixel aspect ratio: square pixels
View 7 Replies
View Related
Apr 5, 2012
I have just installed my newly purchased PSC5 extended software. When I try to use the ACR it will load and I can use it but when I try to open, save or cancel my image I cannot. This is because the ACR window is too 'long' for my Sony desktop window and the buttons I am trying to access are in the 'shadow' of the desktop window. When I try to resize the ACR window to access the buttons it will let me adjust it on the vertical window edges but not on the horizontal window edges. I have to reboot the laptop to do anything at all.
View 8 Replies
View Related
Jul 30, 2013
The code below crashes with an "attempt to write to protected memory" in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
View 7 Replies
View Related
Feb 11, 2013
I tried to print thisdrawing.modeldocument in a vba sub, but it doesn't work.
View 4 Replies
View Related
Dec 9, 2004
Is there an easy way to level out a horizon? PaintSHop Pro has a feature where you put a line on something in your photo that is slanted b crops it) accordingly. I seem to remember PS has this feature--but I can't find it.
View 6 Replies
View Related
Mar 11, 2013
As a new user I really prefer the single window mode but have a real problem in that every time I open a filter the window/box that open opens up underneath the single window and I cant see it without minimising the main gimp window. I've played with the preferences windows management options and seem to have all the file options curves etc on top now (these were opening under the single window at one point) but nothing I do seems to want to make the filter boxes open where I can see them - It's making GIMP quite unpleasant to use.
View 2 Replies
View Related
Sep 14, 2013
I modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
The file is attached.
View 2 Replies
View Related
Apr 17, 2013
How do I change Gimp from a Multi-window view to a single window view?
View 7 Replies
View Related
Feb 6, 2014
In the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies
View Related
Oct 14, 2012
Working in raw, I have made changes to exposurre etc. when I save to jpeg they go lighter. I have looked in the colour settings which are set the same as the camera at sRGB but not sure if I a missing something.
I have recently upgraded from CS4 to CS6, wasn't a problem in CS4, I have looked at the settings in both to try to get them the same but nothing is working.
View 1 Replies
View Related
Sep 9, 2013
Here in the office we have CS4, CS5, and CS6. CS4 and CS6 work fine but in CS5, If we set an image resolution then crop the image it will not keep the resolution we set.
We have tried the resample image on and off. We have tried it with and without a background and nothing seems to work. Is there is special setting in CS5? As I said no issues with 4 & 6.
View 3 Replies
View Related
May 13, 2012
I use rectangle marquee to do this. Only thing, --unlike the crop tool--if has no handles if you don't drag perfectly on the first crack.
Is there a way (crop tool?) -- to keep no uprez or downrez, but just crop and get handles?
View 8 Replies
View Related
Dec 3, 2006
i have a png picture with no ground 256 x 256
i tried to make dimensions 16x16 and keeping the bg transparent with ImageReady, and did save optimized as > then saved it png but the resolution was very bad, and the background was white not transparent.
any suggesstions?
View 3 Replies
View Related
Feb 16, 2005
This is an interesting question. As most of your probably know, Filebrowser is kind of an app with an app. You can open a RAW camera file and set all the parameters for conversion, then update the file without opening it by choosing the alt (PC) or option (Mac) key. This changes the convert box to update.
A friend of mine, also a photographer, applied color corrections to an entire wedding using Filebrowser and updating his RAW files. He then burned a DVD of the RAW files and sent it to his lab. They converted his files and posted a web gallery. He then noticed that the files were horrible! All the conversion settings were not retained with the RAW files.
I have always assumed that any updated conversion information was stored in the EXIF information of the RAW file. Now I'm beginning to wonder if it's stored in the Filebrowser cache or meta information. If this is the case, then which files need to be kept with the RAW files when you transfer them to another computer? Can this be accomplished?
View 4 Replies
View Related
