Using Autodesk Map 3D 2009,
I've inserted several TIF images into my model space, toggled the frames of the TIF's then attempted to print them out in paper space. When I view or print/plot the images are missing. I've downloaded the raster inabler to no avail.
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
Our local agency has come up with a requirement that CAD-generated drawings be submitted to them as 200 dpi TIF files, of between 300kb and 900kb. They do not accept dwg, dwf, or even pdf.
When we create a new plotter in AutoCAD, using any of the raster file formats, setup for the format only allows 100dpi. You can create larger numbers of pixels, 1024x768 vs 1600x1200, for example, but that is not translating into higher resolution.
We have tried the route of printing to pdf, then converting to TIF, but the file sizes are coming out far too large.
If we are unable to find a solution, I guess we can always print to hardcopy and then scan to tif. In 1996 I would have been happy to do that, but not now.
Our specific version of AutoCAD is AutoCAD Civil 3D 2013, but I am sure this is more a generic AutoCAD issue.
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
I'm trying to import a .tif image into autocad 2013 this image I clipped in ArcMap 10.1 and reprojected. The size of the image that I can't import is 36.6 mb, but I can import a MrSIDs image size is 611 mb into AutoCAD this is the error message that I get when I try an import the smaller image. "this file is an unknown format or invalid for images"
View 5 Replies View RelatedMy Raster images TIFF are not printing although they show up in the print preview. They are attached as exernal referneces, loaded and the layers are set to plot. I would like them to plot. Autocad Map 2011
View 3 Replies View RelatedI'm having problems with tiff images. I can load them as an xref but then at times that the image will not load. it seems to have lost the file path. Also when I send dwg to other draftsman outside-- the tiff image will not load what is the trick to have the tiff image move with dwg no matter what drive its on or where its going.
View 1 Replies View RelatedI have problem printing tiff images with a picture in Windows 7, 64 bit only on a laser printers. The processing of even the simplest of drawings to the printer takes too long, more than half an hour after that or stop with the press or to print only part of the drawing.
This problem does not appear when we print only the tiff images on a laser printer or print the entire drawing to a plotter. Also print these drawings with the tiff images without any problems under the previous operating system (XP). Note that we use the latest drivers for all printers.
I am trying to create a Chuck Close style image for a Fine Arts class. I created the base image by resizing my image to 4 px sq and 12" by 12". The image looks great when saved, meaning the pixels are sharply defined from one another. However, when I go to print, a dithering of a sort is added to the image and one pixel fades into another. I need precise sizes because I am actually gluing smaller images to the base as pixels. I would use the mosaic function, but the sizing never turns out right.
View 6 Replies View RelatedI am trying to bring in a couple of Tiff Images into autocad civil 3D. The issue is when I preview the image its in color, however when I insert it into Autocad it is black and white. Is there a way to change the image in Autocad to show up in color?
View 2 Replies View RelatedQuestion: I have a file in Tiff format (large file 145 MB) that I'm not able to print out of CS6. I've tried to save as JPEG, but have been unsuccessful because it is not an 8bit file.
View 3 Replies View RelatedI set up films for screenprinting for remote clents, so work at 35, 45 and 55 lpi a lot. The best way, of course, is to save a pdf with postcript halftones and angles set correctly and have the client print to film through their RIP. Most of my clients don't have RIPs and never will. So I end up working with the bitmap/halftone settings in Phtoshop a lot. It takes a long time. If I could print photoshop or Illustrator seps to hi rez .tiffs (I know they have to be 1200 ppi, but we can work with that) through a RIP via a virtual printer or some other thing, it would save me a lot of time.
View 1 Replies View RelatedGIMP 2.6.11 WinXP
I've been opening my RAW images in Irfanview, converting them to .tif images, and then opening the .tif images in GIMP for processing, but I've been getting a pop-up window (see screenshot) that says:
"Calling error for procedure 'gimp-image-set-resolution': Image resolution is out of bounds, using the default resolution instead."
What does that message mean?
I cannot save images in jpg or tiff. I am using a Mac.
View 10 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedHave developed a problem trying to load some TIF images into Photoshop. I have a large number of images archived over a decade or more. At this point it may some of the older files that exhibit the problem.
Now all these files were edited and stored using the Photoshop versions during the complete time period. The files are always saved with no compression. Have tried to load from Photoshop and clicking on the file in a file list. Photoshop just hangs and I get the message Program not responding. I can take these same files and load them into the ROXIO photo editor with no problem. Stranger yet is if I simply load the file into the ROXIO editor then "save as" back into the same folder (overwrite) the file can then be brought into Photoshop with no problem!
I need a free software to convert Batch images from Tiff To Gif?
View 3 Replies View RelatedI'm trying to work with TIFF images got from Image Pro Plus butGIMP 2.8 doesn't open them, I found that's a problem related to Image ProPlus because misses some tags. Also, I tried with ImageMagick using:
convert "prueba 1.tif" "prueba 1.png"
convert "prueba 1.tif" "prueba 2.tif"
The first works fine, just with some warnings, PNG image was createdsuccesfully.
The second doesn't work and in any case if I do:
convert "prueba 1.tif" -identify
got:
convert: incorrect count for field "DateTime" (27, expecting 20); tagtrimmed. `prueba 1.tif'.
convert: prueba 1.tif: unknown field with tag 40001 (0x9c41) encountered.`TIFFReadDirectory'.
convert: prueba 1.tif: unknown field with tag 50288 (0xc470) encountered.`TIFFReadDirectory'.
convert: prueba 1.tif: unknown field with tag 50291 (0xc473) encountered.`TIFFReadDirectory'.
Original image got from Image Pro Plus: [URL]
I like to repair books with missing pages. Often I can get digital images in tiff or PDF format, but they are often 'dirty', like the one attached. This one seems a good example of the sort of thing I would need to work on.
I need to reconstruct the image, which I think would mean:
i) getting an image that is complete and rectangular with a bleed out of in the same colour.
ii) remove blemishes like library marks, names etc.
iii) reconstruct the decayed text as sensitively as possible.
I was trying to open an image that had already been processed by me in CS6 on this laptop.
When i select the image that i want to open CS6 launches but then i recieve an error message saying that CS6 is unable to open the image. Frustatlingly this does not happen with every image.
One person has said to reinstall the software but i downloaded it from the Adobe site and don't wnt to end up paying twice.
System info
Processor Intel(R)Core(TM)i3-2350M @2.30Hz 2.30GHz
Installed memory Ram 8.00 (7.89 usable)
System type 64 bit
Plug ins
Alien Skin - Exposure 4
Anthropics -Portrait Proffesional
Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.
View 6 Replies View RelatedJust upgraded from LR4 to LR5.3.Just got new laptop (Windows 8.1 64-bit OS)TIFF images exported from LR5 are causing (many) warnings when stitching panoramas using Hugin.Hugin works fine (no warnings) with TIFF images exported from LR4 on prior laptop (Win Vista)Hugin warning message: TIFFReadDirectory Warning: unknown field with tag 59932 (0xea1c) encountered.Images are being exported from Nikon D800 NEF RAW filesPanorama stitching still works, but I am getting about 50-100 warning dialog boxes.
Is there a LR5 setting which allows me to prevent LR5 from including tag 59932 in TIFF images?
-or-
Is this a known issue with a fix in the works?
how can i view all of a 200mb tiff file of scanned images in Ps? "windows photo viewer" opens all 5 pages of the tiff file. Ps appears to only open the first page of images. how can i view all 5 pages of images in Ps.
View 3 Replies View RelatedIs there a way to do batch process of converting .jpg or .tif images from RGB to CMYK?
View 2 Replies View RelatedI have PSE 7 and it does not support the "Transform" functions for 16-bit TIFF images, nor does it support Filter->Correct Camera Distortion. Are 16-bit TIFFs fully supported in PSE 10?
View 3 Replies View RelatedI am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
When I save my renders in 8-bit tiff formats, the images are slightly blurred. They do not look as crisp as in the render window.
View 1 Replies View RelatedI am working with pure monochrome tiff images. The images are of handwritten letters captured from microfilm. The handwriting is faint in places, but the image density is pretty high (3400 x 4400 px). I thought that there might be a way to "fill in" the white space between the scattered pixels forming the faint areas--but I can't figure out how to do it.
Gimp (Ubuntu 12.04LTS) seemed to be the natural place to turn, but I am not a photo-editor.
Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies View RelatedI am having trouble with .emf files. My boss has created schematics in Microsoft Visio and converted them to .emf images so that I can insert them into AutoCAD and create various drawings. However I have tried a couple of different ways of importing the images into CAD (copy paste, drag'n'drop etc..) and they all seem to work fine but when I print the drawing or close it and re-open it, the schematic .emf image disappears completely.
View 2 Replies View Related