AutoCad :: Printing TIFF Images On Laser Printer
Aug 9, 2012
I have problem printing tiff images with a picture in Windows 7, 64 bit only on a laser printers. The processing of even the simplest of drawings to the printer takes too long, more than half an hour after that or stop with the press or to print only part of the drawing.
This problem does not appear when we print only the tiff images on a laser printer or print the entire drawing to a plotter. Also print these drawings with the tiff images without any problems under the previous operating system (XP). Note that we use the latest drivers for all printers.
View 5 Replies
ADVERTISEMENT
Feb 13, 2009
Ever since PS CS3 I've noticed that when I print a 300 dpi grayscale image to my laser printer directly from Photoshop, it comes out as if a 72dpi benday screen had been applied. Never happened in earlier versions. I used to get excellent black-and-white print quality through Photoshop, just using the default settings.
I have 300 or 600 dpi grayscale images, usually with a lot of clean black lines. But whether I set to "printer manages colors" or "Photoshop manages colors", and no matter what profile I select, I get the same halftone (awful) result on my HP Deskjet 3330. The printer's settings are fine. If I print the same image from any other application, such as Quark or MS Word, the print quality is fine.
View 7 Replies
View Related
Oct 20, 2008
with Photoshop CS4 installed, printing text to my laser printer results in 'screened' text and lightly screened background. I have the print dialog box set to 'output', but now find the 'screen' button is grayed out as is the 'transfer' button. I need to know how to make the 'screen' button active to eliminate the screen affect I am getting.
View 8 Replies
View Related
May 16, 2012
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
View 3 Replies
View Related
Mar 16, 2011
My Raster images TIFF are not printing although they show up in the print preview. They are attached as exernal referneces, loaded and the layers are set to plot. I would like them to plot. Autocad Map 2011
View 3 Replies
View Related
Oct 8, 2012
I amprinting on an Epson Stylus Pro 4800 using Photoshop CS3. Although the printer will accommodate lengths up to 55 inches, when I try to print something longer than 30 inches, Photoshop crashes. Epson adives the purchase of RIP software. Is there a way in Photoshop to get around the length limitation?
View 1 Replies
View Related
Oct 10, 2012
I have one user that when trying to print to a color laser jet printer it only comes out in color. I even set the Plot style to monochrome.stb, (which is a network file that others use without issue) have Plot with plot styles checked, and even tried checking the black and white only in the printer properties. This is Autocad 2012.
Is there something I am missing to have the print out come out in black and white? Te print preview shows it in color.
Forgot to mention, if another user opens the drawing, it prints in black and white ok.
View 1 Replies
View Related
Feb 21, 2008
I am looking to purchase my 1st color laser printer. Iam a graphic designer that does print and web projects. I would like to find one that is great but not too pricey.
View 12 Replies
View Related
Feb 6, 2009
We are printing out some psd files that were sent to us on a laser printer . There are little dots of ink all over the page.. It seems that what photoshop outputs the printer doesn't think its pure white and is trying to print some color.. even when we change the background to transparent it still prints these dots of ink all over the page.. Indesign does not have this issue..
We have been trying to narrow this down for a while now.. Its as simple as creating a new psd..typing in text and hitting print..Bam little dots of ink all over the page.. Its like the printer thinks it should print some color even though the colors in ps are white or transparent..
Hard to explain..did that make sense?
View 4 Replies
View Related
Jun 17, 2009
In older versions of Illustrator (8 & 10) I can change the lpi to a 20 or 30 with a GCC Elite XL printer and have no problem printing BIG dots on vellum paper for screen printing on T-shirts.
I'm running newer version (CS2) now, and I can set the halftone to 20 lpi, but when I print it to my HP 5si mx printer, it comes out looking as smooth as a paper printed dot can look! Not what I want!! I've tried changing all kind of settings, both on the printer menu, and in the print dialog box. But my HP seems to default to an 'enhanced' halftone dot!!! My GCC is getting really old, only has drivers for 8 & 10, and I need a back up in case it dies someday and I can't print those big dots anymore!
I can't update to newer (600 or 1200dpi) printers because I need to print at 300dpi so my dots come out looking big and bold. I know, I know, it's not what most people want these days, but it's what I n
View 3 Replies
View Related
Oct 3, 2011
I was working on an order form design the other day and my boss said we need to fill in some of the empty space, so I suggested we use a dot pattern-esque type watermark of the organization's logo that the order form was for.
For some reason when I sleceted the logo I couldnt access the change brightness contrast option in effects. So I simply made a light gray rectangle, placed it over the logo, clicked on the rectangle with the transparency tool, changed it to uniform, and changed the mode to mulitply or add or something like that. It looked great on screen, but when i sent it to the laser printer with some post script LPI or dot pattern options for the lighter grays, nothing printed out at all from underneath the rectangle.
I tried it through our copying machine, and it worked, but the copying machine has no built in halftone effects for grayscale.
View 3 Replies
View Related
Aug 22, 2013
I can not find a way to print out a poster 1000 mm x 1500 mm.There is no such function in Xara X9.
how to print out a poster on a color laser printer A4 size?
What I mean is to use a Tiles or something that professional programs have.
View 6 Replies
View Related
Sep 6, 2013
When i take bw laser print from corel draw, the output is not pure black. I tried using the the 'Preserve Pure Black' setting in corel draw. But it turns out to have some adverse effect while converting image from one format to the other (like rgb to cmyk) bitmaps, the black shade on the image looked washed out in multicolor offset print.
what should i do now to get pure black output from bw laser printer without using the preserve pure black setting.
printer : hp 1020
operating system : windows 7
corel draw version : x5
View 6 Replies
View Related
Mar 27, 2013
Is there a best setting for the mode, color settings, and color profiles when printing a grayscale vector illustration to a monochrome laser printer? I am making vector maps, and right now they are mostly black line and black text with only the K values in CMYK. There are some gray tones—for example water areas are 10% K, with no C, M or Y. Would it make any difference if I used RGB mode values at 100% (255,255,255), or a rich black in CMYK (such as 40C, 30M, 30Y, 100K)? I printed in K only at 1200dpi to a Generic Gray Gamma 2.2 profile, and it doesn't look too bad. There aren't many of the lines that are really jagged. I just wondered if there are better settings.
I'm using Mac OS 10.6, Illustrator CS6, and a Brother HL-5470DW monochrome laser printer.
View 5 Replies
View Related
Jul 5, 2004
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
View 5 Replies
View Related
Feb 28, 2009
any instructions or settings in Corel Draw when printing to a CO2 laser?
View 5 Replies
View Related
Jul 3, 2012
I need to send 2D drawings for laser cutting. Opti is the laser software..My issue is that the laser cuts to each grip and gives the cut metal a serrated looking edge.
Removing/simpliying the lines into fewer (microscopic!) segements or being able to adjusts the number of grips.
View 6 Replies
View Related
Nov 11, 2012
The attached file shows the front castle of a ship with two ranges of windows on its white wall. I am trying to print this image with a laser printer on a transparent film while keeping the original white of the wall, letting only the windows inside their black frame transparent (the first two window frames of the upper row on starboard have been filled with a greyish tone merely as an experiment) - as if that transparent were projected on a dark surface rather than on a white one.
since the addition of all colours (i.e. 255) is equal to white and therefore to transparency (or to the absence of colours), and since transparency will show as, well, transparency when printed on a transparent film, how can white - in this case the white background of the wall - still be added to the transparent film while keeping only the windows inside their frame transparent?
All my attempts with a variety of painting tools (including those of Mypaint) and profiles failed. Should this be done with two different layers instead?
View 6 Replies
View Related
Jun 27, 2012
We have a number of printers in our office, an A3, an A1 plotter and an A4 printer.
After printing off the same drawing to the A3 and the A4 yesterday, I realised the A4 printer is printing around 95% of the size it should be printing.
I don't even know where to start fixing this problem; the user manual for the HP Officejet Pro 8000 Enterprise [I know!] doesn't even reference scale at all. It could be an issue with CAD linking to the printer my computer linking to the printer the printer My colleagues are having the same issue, so it's not just my computer or settings.
View 4 Replies
View Related
Jan 3, 2012
I want to print an A3 drawing on an A4 printer. I saved the drawing as .DWF and opened the "Autodesk Design Review 2012" to perform the "tiling" print. When in printing properties, I can't seam to understand why the drawing is split in 6 pages, when in reality one A3 sheet is 2x A4 sheets. You can see in the example, that so much space is wasted, is there a way to center the drawing, and am I doing everything right here?
View 4 Replies
View Related
Jun 13, 2013
I have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
View 0 Replies
View Related
Dec 18, 2013
When I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
View 1 Replies
View Related
Jul 8, 2013
I'm on a help desk where we have several users who run Win7, but can't publish any projects that have a TIFF overlay. Let me correct that. It prints, but that TIFF overlay is not included.
They print to a Xerox 6204 Wide Format printer, and every single Win7 user has this problem (32 and 64 bit). The one person that still runs XP doesn't have this problem. This sounds like a driver problem to me, but we've reinstalled the drivers and still no change.
View 1 Replies
View Related
Dec 9, 2011
I have a HP DesignJet 110 nr connected as a network printer. I have all the drivers updated including the network card. I have unistalled and reinstalled all the drivers and software. I have also replaced the ink cart. too. When I print in AutoCAD 2011 it acts like it is printing stuff, but it goes throught the whole process and nothing prints. I just started creating PDFs and sending them to the printer, but thought I would give it a new shot.
View 5 Replies
View Related
Aug 17, 2011
I have Windows 7 workstation 64 bit.
I am trying to configure a networked printer using a PS driver. I am not able to print floor plans full page. It is only printing 1/4 of the plans.
configuring the device? The device is a Canon IRC5185.
I do have an HP print locally and it works perfectly fine.
View 1 Replies
View Related
Oct 3, 2011
I tried printing a plan with my printer and for some reason it wont print in portrait mode, no matter how much i change the settings it does not change the page orientation, the preview also shows it to be in landscape mode
View 3 Replies
View Related
Jun 13, 2013
I have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
View 2 Replies
View Related
Sep 18, 2012
Is it possible, using Visual Basic.Net to set the "Printing Preferences" for the default printer?I need to change the paper size (A4, A3) and orientaion (Portrait or Landscape) before I send a file to the printer.
View 1 Replies
View Related
Mar 7, 2013
I need to create a BMP for printing on a Fox Jet Printer. The BMP needs to be 64 dpi vertically and 150 dpi horizontally.
View 2 Replies
View Related
Nov 21, 2012
All of a sudden, my Epson R2400 stopped printing photoshop CS5 files. It prints files from other programs (apperture, mail, web) just fine. The cartridge goes back and forth and the paper advances, but no ink is applied.
View 3 Replies
View Related
Sep 1, 2012
I recently replaced my hard drive and upgraded to Mountain Lion. Now Photoshop crashes every time I try to print to my HP Photosmart Premium printer.
View 1 Replies
View Related
