with Photoshop CS4 installed, printing text to my laser printer results in 'screened' text and lightly screened background. I have the print dialog box set to 'output', but now find the 'screen' button is grayed out as is the 'transfer' button. I need to know how to make the 'screen' button active to eliminate the screen affect I am getting.
View 8 RepliesEver since PS CS3 I've noticed that when I print a 300 dpi grayscale image to my laser printer directly from Photoshop, it comes out as if a 72dpi benday screen had been applied. Never happened in earlier versions. I used to get excellent black-and-white print quality through Photoshop, just using the default settings.
I have 300 or 600 dpi grayscale images, usually with a lot of clean black lines. But whether I set to "printer manages colors" or "Photoshop manages colors", and no matter what profile I select, I get the same halftone (awful) result on my HP Deskjet 3330. The printer's settings are fine. If I print the same image from any other application, such as Quark or MS Word, the print quality is fine.
I have problem printing tiff images with a picture in Windows 7, 64 bit only on a laser printers. The processing of even the simplest of drawings to the printer takes too long, more than half an hour after that or stop with the press or to print only part of the drawing.
This problem does not appear when we print only the tiff images on a laser printer or print the entire drawing to a plotter. Also print these drawings with the tiff images without any problems under the previous operating system (XP). Note that we use the latest drivers for all printers.
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
I am looking to purchase my 1st color laser printer. Iam a graphic designer that does print and web projects. I would like to find one that is great but not too pricey.
View 12 Replies View RelatedWe are printing out some psd files that were sent to us on a laser printer . There are little dots of ink all over the page.. It seems that what photoshop outputs the printer doesn't think its pure white and is trying to print some color.. even when we change the background to transparent it still prints these dots of ink all over the page.. Indesign does not have this issue..
We have been trying to narrow this down for a while now.. Its as simple as creating a new psd..typing in text and hitting print..Bam little dots of ink all over the page.. Its like the printer thinks it should print some color even though the colors in ps are white or transparent..
Hard to explain..did that make sense?
I have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
In older versions of Illustrator (8 & 10) I can change the lpi to a 20 or 30 with a GCC Elite XL printer and have no problem printing BIG dots on vellum paper for screen printing on T-shirts.
I'm running newer version (CS2) now, and I can set the halftone to 20 lpi, but when I print it to my HP 5si mx printer, it comes out looking as smooth as a paper printed dot can look! Not what I want!! I've tried changing all kind of settings, both on the printer menu, and in the print dialog box. But my HP seems to default to an 'enhanced' halftone dot!!! My GCC is getting really old, only has drivers for 8 & 10, and I need a back up in case it dies someday and I can't print those big dots anymore!
I can't update to newer (600 or 1200dpi) printers because I need to print at 300dpi so my dots come out looking big and bold. I know, I know, it's not what most people want these days, but it's what I n
I have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
I was working on an order form design the other day and my boss said we need to fill in some of the empty space, so I suggested we use a dot pattern-esque type watermark of the organization's logo that the order form was for.
For some reason when I sleceted the logo I couldnt access the change brightness contrast option in effects. So I simply made a light gray rectangle, placed it over the logo, clicked on the rectangle with the transparency tool, changed it to uniform, and changed the mode to mulitply or add or something like that. It looked great on screen, but when i sent it to the laser printer with some post script LPI or dot pattern options for the lighter grays, nothing printed out at all from underneath the rectangle.
I tried it through our copying machine, and it worked, but the copying machine has no built in halftone effects for grayscale.
I have one user that when trying to print to a color laser jet printer it only comes out in color. I even set the Plot style to monochrome.stb, (which is a network file that others use without issue) have Plot with plot styles checked, and even tried checking the black and white only in the printer properties. This is Autocad 2012.
Is there something I am missing to have the print out come out in black and white? Te print preview shows it in color.
Forgot to mention, if another user opens the drawing, it prints in black and white ok.
I can not find a way to print out a poster 1000 mm x 1500 mm.There is no such function in Xara X9.
how to print out a poster on a color laser printer A4 size?
What I mean is to use a Tiles or something that professional programs have.
When i take bw laser print from corel draw, the output is not pure black. I tried using the the 'Preserve Pure Black' setting in corel draw. But it turns out to have some adverse effect while converting image from one format to the other (like rgb to cmyk) bitmaps, the black shade on the image looked washed out in multicolor offset print.
what should i do now to get pure black output from bw laser printer without using the preserve pure black setting.
printer : hp 1020
operating system : windows 7
corel draw version : x5
Is there a best setting for the mode, color settings, and color profiles when printing a grayscale vector illustration to a monochrome laser printer? I am making vector maps, and right now they are mostly black line and black text with only the K values in CMYK. There are some gray tones—for example water areas are 10% K, with no C, M or Y. Would it make any difference if I used RGB mode values at 100% (255,255,255), or a rich black in CMYK (such as 40C, 30M, 30Y, 100K)? I printed in K only at 1200dpi to a Generic Gray Gamma 2.2 profile, and it doesn't look too bad. There aren't many of the lines that are really jagged. I just wondered if there are better settings.
I'm using Mac OS 10.6, Illustrator CS6, and a Brother HL-5470DW monochrome laser printer.
any instructions or settings in Corel Draw when printing to a CO2 laser?
View 5 Replies View RelatedThe attached file shows the front castle of a ship with two ranges of windows on its white wall. I am trying to print this image with a laser printer on a transparent film while keeping the original white of the wall, letting only the windows inside their black frame transparent (the first two window frames of the upper row on starboard have been filled with a greyish tone merely as an experiment) - as if that transparent were projected on a dark surface rather than on a white one.
since the addition of all colours (i.e. 255) is equal to white and therefore to transparency (or to the absence of colours), and since transparency will show as, well, transparency when printed on a transparent film, how can white - in this case the white background of the wall - still be added to the transparent film while keeping only the windows inside their frame transparent?
All my attempts with a variety of painting tools (including those of Mypaint) and profiles failed. Should this be done with two different layers instead?
I need to send 2D drawings for laser cutting. Opti is the laser software..My issue is that the laser cuts to each grip and gives the cut metal a serrated looking edge.
Removing/simpliying the lines into fewer (microscopic!) segements or being able to adjusts the number of grips.
I need to create a BMP for printing on a Fox Jet Printer. The BMP needs to be 64 dpi vertically and 150 dpi horizontally.
View 2 Replies View RelatedAll of a sudden, my Epson R2400 stopped printing photoshop CS5 files. It prints files from other programs (apperture, mail, web) just fine. The cartridge goes back and forth and the paper advances, but no ink is applied.
View 3 Replies View RelatedI recently replaced my hard drive and upgraded to Mountain Lion. Now Photoshop crashes every time I try to print to my HP Photosmart Premium printer.
View 1 Replies View RelatedI just bought a new 4000 printer and the prints come out a little darker and with a little more magenta than what appears on my monitor.
The monitor has been calibrated using the spider software several times and each time it comes out the the same and I think that part of the process is good.
I have set my color workspace in Photoshop to US press defelts (Adobe 1998) and all seems well there.
The images have been scanned to 8000dpi using a High quality scanner from an outside source.
I open the image and convert to working space RGB, and do my correction to the image which includes more color saturation.
I go to print the image using Adobe1998 as source and the printer paper ICC as the output. I go to advanced options and make sure color correction are turned OFF and print.
The images on my printer always come out darker and with more magenta that what I see on the screen no matter what Icc profile I use for every kind of paper.
The softproof does not look that way.
When I print using same as source as the output with color correction sliders set to 0 the print will be much closer but still not quite like whats on the screen.
When I do it the correct way(the first way I discribed) why is my print comming out too dark and too much magenta?
I have asked Epson and gotten no response so I though I would try somewhere else. I have an Epson RX595 printer that can print to DVD's and CD's my question is ...
Is there a way to print a DVD/CD directly from Adobe Photoshop.? Is there a template that I can download and open in photoshop and it will be configures properly to print to this printer?
I amprinting on an Epson Stylus Pro 4800 using Photoshop CS3. Although the printer will accommodate lengths up to 55 inches, when I try to print something longer than 30 inches, Photoshop crashes. Epson adives the purchase of RIP software. Is there a way in Photoshop to get around the length limitation?
View 1 Replies View RelatedI am using Windows 7 and recently installed Photoshop Elements 10. If the Dell 3000cn is set as my default printer, as soon as I click on print, I receive the mssage I need to install a printer.
I have verified that I have the latest Dell driver. If another printer is the default, I can print one image to the Dell printer. If I try to print a second image or change certain prnter settings, such as setting a custom size, PS Elements just show the waitng icon and never moves on so it has stoped working and I receive the following dialog box from Windows.
When printing from Photoshop CS3(Version 10.0.1) to a brand new Zebra ZXP Series 3 card printer in Windows 7 32 bit I am getting this: errors:
I went from an XP machine to Windows 7(with a video card plenty of memory) and still the same errors. I updated the Zebra printer drivers and firmware. I can test print from the PC just fine. I even tried CS4 with the same result. The user purchased a license for CS3 so I am troubleshooting with CS3 at this moment. My user is way behind in printing id badges for his Fireman and needs this resolved ASAP. I may have to go with Zebra's Card Studio Software if there is no resolution for this Photoshop issue.
I am trying to print from Photoshop CS6 to an Epson PictureMate color printer and an Epson PictureMate 225 printer. In both cases I want to let Photoshop manage color. I am finding no color profile for Epson in the list of profiles provided by Photoshop. The best I can do is choose “display” as my profile. Still my color prints do not match what I see on my screen in Photoshop. They are flat and washed out. How can I obtain print profiles for my Epson Printers to be used with Photoshop 6?
View 2 Replies View RelatedI am not able to print images in Photoshop cs6 accurately using my Epson r1900 printer. This seems to have become an issue only since installing cs6. The images look dark and murky. I am using osx 10.7
View 1 Replies View RelatedSo in CS5 we were able to print to the custom sizes we created in the print screen for our HP Z3200, but for some reason we haven't been able to use the custom sizes in CS6, you click on a custom size and when you say ok from the printer settings and it goes back into Photoshop print settings it binks back to 8.5x11. You can use the standard sizes that came with the HP print software, but not any custom sizes you create. Is there a setting somewhere in Photoshop that I need to change?
View 4 Replies View RelatedMacosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again. Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11. Start it up again. Guess what first print is a mess again. all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11. Same thing.. first print a mess all others ok.
no problems with PSE10 or PSE9.
We have a number of printers in our office, an A3, an A1 plotter and an A4 printer.
After printing off the same drawing to the A3 and the A4 yesterday, I realised the A4 printer is printing around 95% of the size it should be printing.
I don't even know where to start fixing this problem; the user manual for the HP Officejet Pro 8000 Enterprise [I know!] doesn't even reference scale at all. It could be an issue with CAD linking to the printer my computer linking to the printer the printer My colleagues are having the same issue, so it's not just my computer or settings.
I want to print an A3 drawing on an A4 printer. I saved the drawing as .DWF and opened the "Autodesk Design Review 2012" to perform the "tiling" print. When in printing properties, I can't seam to understand why the drawing is split in 6 pages, when in reality one A3 sheet is 2x A4 sheets. You can see in the example, that so much space is wasted, is there a way to center the drawing, and am I doing everything right here?
View 4 Replies View Related