I am trying to bring in a couple of Tiff Images into autocad civil 3D. The issue is when I preview the image its in color, however when I insert it into Autocad it is black and white. Is there a way to change the image in Autocad to show up in color?
View 2 RepliesI want to convert a black and white tif image to colour. I opened it in Photoshop, changed the mode to RGB colour/8, saved it as psd, but when I use the Replace Colour dialogue box, I just get my colour showing as grey-scale. What’s the correct way to proceed?
View 8 Replies View RelatedI just finsihed setting up this new computer. I reloaded AC 2012 LT. I need to reset my settings. I do not rmember how to change that black background to white.
View 3 Replies View RelatedI have a color picture and I wanted to change it to black and white but I want to keep a necklase that im wearing the same color (green). How can I turn my picture into black and white without changing the color of my necklase?
View 2 Replies View RelatedCan anyone tell me how to change a photo to black and white but leave a handband in the photo in color? I just can't quite figure it out!
View 4 Replies View RelatedI have done a little work and created these images. The blur does not look completely right to me because I just used the free select tool and would copy the coin part of the picture out and paste it back on with a different layer and line it up as well as I could. I would really like to make it look a lot better with no blurred part of the coin in the back ground. I would also like to turn the background of the image B&W and leave the coin in color.
View 1 Replies View RelatedHow do I turn off this feature and reverse the images back to the way I shot them?
View 3 Replies View RelatedWhen importing images from a CF card, they are imported black/white, not color as exposed. Previous imports were normal color.
View 4 Replies View RelatedI am having trouble with my tif files coming in with a white background (ala pdf) vs the black with white "lines" I prefer. I think it is because I converted pdfs to tifs, then edited them in photoshop to remove linework, then saved. Perhaps a setting in the saved options is wrong?
Or a color option in photoshop? I thought I had it all set but only the 1st one worked as desired...can't figure out what changed. We insert the plan sheets as a layer that is grayed out with our linework dark so using the white background won't really work.
I scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies View RelatedI have a logo in the form of a png file. It is text with a drop shadow and has a transparent background. This works well on a sites light background but they want to be able to use it on black backgrounds also.
How to change this black logo to white and keep the subtle, faint opacity of the drop shadow? Also, keeping the transparent background?
I am a glass artist and I have some projects that revolve around being able to turn a photo into black and white. I notice that when it is in black and white it is actually in about 10 shades of gray as well. I need it to be only in black and white. It would also be nice to know how to turn a colored photo into maybe four or five different colors and still have it look somewhat normal.
Any help with this would be greatly appreciated. I am working on a project that has 10,000 glass pieces in it, but it revolves around knowing how to do these things.
I have a bddy that's seen me do some fun things with PS, and I'm always looking for a challenge so he asked me if I could turn him into a white guy to see what he'd look like. My first thought was to use the color replacement tool, i used all the default setting for it but hanged the color part to background swatch. I then used the background swatch from his skin tone, and for the front color I chose a peach colored tone, but the problem is al it does it slightly lighten up his skin tone. I tried alternative colors such as blue, and it hanged his skin tone to blue right away...
View 2 Replies View RelatedI'm currently deployed in a computer came in the mail broken so I'm unable to do this. How to take away the black background to make it white or transparent.
View 9 Replies View RelatedHow do I change a colour photo to black and white? I'm embarrassed to ask this but I've spent about an hour going through everything and even looked at the help page. I bet its so simple but I just cant work it out.
View 5 Replies View Relatedsee the same image is used in all color variations of this product. I would imagine they shot something with contrasting dual colors since it would be harder to mask the solid white or black but my question is how do they change the color from black to white or visa versa without loosing any shadow integrity in the process?
View 3 Replies View RelatedI have a problem with importing pictures from my Leica to LR3.
If the pic's are shot in black and white with the Leica preset, LR3 is changing them into colour images immediately after the import.The pic's are shot in RAW
I am just facing a challenge — I need to convert black T-shirt into whithe, but the fabric is textured. See the attached IMGs:
I tried several things, but the best result I got looks somehow close to this disaster:
Despite strong Curves Adjustment layer, there seems to be not a chance to get some contrast.
See how looks similar shirt from a slightly different material — just to get a brief idea:
Inversion will not work because of shadows, Shadows/Highlights does not work much. Converting from White to black is much more easier & almost perfect — because of this, there should be a reverse way…
I sell a template that has a transparent layer in sections, after saving as jpeg it is supposed to go white, but for some of my customers it recently started going black!I at first thought it had to do with not pasting the layers correctly, but its like this after export, so I don't think that should matter...I've attached a sample image so you can see what is happening. Where it is black, it was originally transparent around the circle image, and normally would save white.
View 2 Replies View Related1st attempt: Imagine that you have two colors, red and black, and you want to mix 10 drops of red with 3 drops of black. You get a specific color - a weird dark red. Now imagine I have a image with only that solid color and I want to replace those 3 drops of black with three drops of white. How can I do that?
2nd attempt: Normal A4 sheets are white, but I want to print a image (with no white or light colors) on a black sheet of paper. I don't need to use a black cartridge, because the black is already there in the paper sheet. How can I remove the "black tones" in order to get proper colors when printing?
All this to answer one bottom question, which is also my 3rd attempt on this:
3rd attempt: I have access to a modified printer that has white ink on the black ink cartridge; that way, If I write a few words in black and print them out on a black sheet of paper, I'll have a white text. This is very simple if I want only to print text; set font color to black and print, ending with a white text printout. But what if I have a photograph, for example, and I want to print it on a black sheet? If I have a white boat, for example, its' color has to be changed to black. If I want to print a light green, I have to have a dark green on my image. Is there any way to do this?
The instructions say <<< In the Background panel, select the Background Color option and click the color swatch to choose the color. >>> But I can't seem to find any way of changing the background colour from the default, white. ! (I want black.)
View 9 Replies View Relatedi've set up two ctb files one color and the other black and white . is it possible to assign drawings on the same sheet , two different ctb files so that one prints in color and the other black and white.
View 7 Replies View RelatedI am very new to photography and Lightroom 3.4 64 bit. I have a photo of an apple on the table. I want to get the photo black and white (did that already). Now I want the apple it self to remain its own red color. How do I do that?
Also, I have this apple and its reflection is on the knife that is cutting the apple. How can I get that in color too?
I scan newspaper articles then add them to a PDF collection. I want the newspaper tones of grey to disappear. What is the easiest way to change the greyscale to black and white?
View 1 Replies View RelatedI am trying to draw some red signs with white lettering, but my text is always black in paper space whether I set the text layer color to black or white. How do I make a white layer in paper space?
View 2 Replies View RelatedI have a color picture which I took, of a red berry bush. I want to remove all the color except for the red from the berries. I know how to lasso the berries, but I can't remove the color from the bush/background and leave the red berries.
Note: I did this once a couple years ago, and can't remember how I did it..I have some memories, but probably remember just enough to make me dangerous. I have done some searches but obviously the results are numeorus and I haven't found what I am looking for yet.
I know the solution involves selecting the berries and then inversing it and then setting all 3 colors to 0 for the background.
What I can do is
1) lasso the berries
2) inverse
what I can't figure out
1) it seems like there was 1 step about layering which enabled me to get started, but I don't remember this, it does seem like I am missing something very basic when I try to do this
3) Where is the color scale, the only thing I can find is the grayscale option which switches the entire project to black and white.
I'm trying to import a .tif image into autocad 2013 this image I clipped in ArcMap 10.1 and reprojected. The size of the image that I can't import is 36.6 mb, but I can import a MrSIDs image size is 611 mb into AutoCAD this is the error message that I get when I try an import the smaller image. "this file is an unknown format or invalid for images"
View 5 Replies View RelatedI am doing some engineering drawings in ACAD 2011. I use multiple colors on-screen to discern between certain items, then plot everything in black, like I'm sure almost everyone out there does. However, I would like to print only lines of a certain layer in differing colors. Is there a way to have that one layer print in a different color besides black, yet still use multiple colors on-screen?
View 6 Replies View RelatedI am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
I'm new to Map 3D and not to Civil 3D. I connected to a roads and streams shp file from a ArcGIS directory. Everything came in great and I even was able to get everything named all at once from the attibute directory. The problem is that the features seem to only plot in the colors that I see them as. If I change them all to black, then I see can't see them at all. I have been spening the past 3 hours trying to get them to jus plot black. We also have to stick with stb plot styles in our department.
View 3 Replies View RelatedIs it possible to change the background color in Block editor from white to black?
View 2 Replies View Related