I know there is a command/button to turn all layers back on if most of them are off, and you want them back on. I use it all the time.
My question: is there a similar command to turn them all off? If not, why not? It makes just as much sense to me. Sometimes I want to turn all of them off, and then just turn one back on.
my gimp 2.8.6 makes majority normal layers turn into text layers..
Even if i "discard text information" from layer..and then save it as .xcf it doesnt work! Same layers appear as text layers when i open that .xcf Its not a big deal but it really slows me down when im working with layers..
can you turn off XREF layers? i have a set of drawings and in certain layouts, i need to remove layers.
View 4 Replies View RelatedI am trying to design a house on AutoCAD Architecture 2011 and I have a bunch of layers that I'm not using but I can't delete. The problem is when I turn off all the layers I am using and I leave the ones I'm not using on their is noting on my screen??? why they are their and why I can't get rid of them. I'm trying to keep everything neat and they're messing me up!!
View 3 Replies View RelatedI have found this point today!
If I want to trunoff/on some layers in different layouts, the best way is to use "vp freeze" column in layers properties manager. This way I can manipulate layers' visibility without altering them in MS or other layouts.
Left to "vp freeze" column there is "new vp freeze". I don't know what is this one?
I was wondering if it's possible to turn snap off on a set of layers whilst keeping it on for others?
View 2 Replies View RelatedI have a one drawing in MS with 5 layers.
I have 2 viewports in one layer tab from that drawing with different scales.
I want to turnoff 2 layers in one of the VP but have them turned on on the other VP.
What is this used for? From reading, it seems as though if you use this command it is a way to turn on and shut off layers?
View 2 Replies View RelatedI've "Binged" and "Googled" this for days, and have searched this forum internally with no luck.
I work primarily in GIS of a totally different platform than Auto Desk's offerings so my terminology may be tainted.
(I'm running AutoCad 2005 btw)
How can I tell AC to turn off any/all layers that are empty (i.e. have no objects, no block associations, no rasters etc).
I don't want to purge these empty layers as I will eventually need them.
Scenario:
All layers are turned on and visible, after I have purged empty layers that won't be needed, there are still empty layers left I will need to use later, I wish to turn off only these layers.
(There may be 20 or so layers so I was hoping for a programmatic way of doing this.)
I often draw over topography lines and use them for reference but I don't want to snap to them. Is there any way to view an object and turn off snapping only for that specific object or layer? For instance, can you make frozen layers visible somehow so they can be viewed, but not snapped to? Or is there another way to accomplish this?
View 4 Replies View RelatedI would like to turn off all the existing layers in active document. I have found in developer's guide how to turn off one layer with specified layer name but can not apply it on all layers with any layername.
I tried to get all the Object ID's in layer table and then for each object turn layer off but seems that it does not work.
<CommandMethod("FilterLayers")> _Public Sub FilterLayers()'' Get the current document and databaseDim acDoc As Document = Application.DocumentManager.MdiActiveDocumentDim acCurDb As Database = acDoc.Database'' Start a transactionUsing acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()'' Open the Layer table for readDim LayerTable As LayerTable = acTrans.GetObject(acCurDb.LayerTableId, OpenMode.ForRead)Dim LayerTableRecord As LayerTableRecord = acTrans.GetObject(LayerTable.ObjectId, OpenMode.ForWrite)For Each ObjectId In LayerTableLayerTableRecord.IsOff = TrueNext'' Save the changes and dispose of the transactionacTrans.Commit()End UsingEnd Sub
From Model I made 3 view ports. How can I turn layers off in each viewport?
View 9 Replies View RelatedI have lots of layers and I need to turn off all of them not one by one.
View 9 Replies View RelatedHow to turn on/off the layers in a filter?
In our company we use standard layerfilters, so they should be the same name in every drawing (else its gonna be a good idea to do so).
If i know the command on how to turn off of on layers who are set in a filter i can make a macro to do it for me, but i dunno if there is an way to turn of those layers with an command.
Every time I change views in 2013, new layers added to the drawing turn off. How do I stop this? The active layer also defalts to the active one I started with.
View 1 Replies View RelatedI have a question regarding AutoCAD 2012 and when it comes to locking layers.
When working on the basement layer I would like to see that layer locked in turn not affecting my other layers, ie: my house/garage/second-floor.
Turn on/off layers in the current viewport only, I’m wondering if there is a command that can be plugged on the “quick access toolbar” by which one can turn on/off layers in the current viewport only.
The available command to do so is “Freeze and thaw in current viewport” (attached) and it sounds it can’t be plugged in the “quick access toolbar”!
Is there a way to plug the command “Freeze and thaw in current viewport” in the “quick access toolbar” (attached)?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I made an autocad file. with many xref files. there are layers. and the layers are all the same, only the name for the layer its the name of the xref link . but how can i turn it off at once.
View 9 Replies View RelatedI don't have this problem on all my files, only a select few. When i save a file and reopen, all the viewports in which I have frozen layers are all reset. All layers are turned back on and I have to go through every viewport and refreeze layers. This problem has persisted long enough that I unfortunately know when I close a file I will have to reorganize the layers next time I open the file. Is this a setting issue or this a bug in the file?
View 3 Replies View RelatedI have an old routine that freezes layers that are off. I would like it to also turn off layers that are frozen. It took a while but I think I figured out how the old routine works. I was having trouble determining how the routine would know if a layer was off or not. I found if the color was a negative number that meant the layer was off (cond ((< (dxf 62 l) 0) (command "f" (dxf 2 l)))). How do I tell if the layer is frozen?
I was also wondering what the character was after the DXF code ie. (dxf 62 l). Is is a lowercase L or an upper case i and what function does it have?
Below is the old routine that freezes layers that are off.
(defun c:fo (/ l dxf code list)
(defun dxf (code list)
(cdr (assoc code list))
);defun
(setq l (tblnext "layer" T))
[code].........
I have 2 quick questions:
1- How do I turn OFF the display of Layers in Layout viewports, but they remain ON in the Model?
2- How do I rotate a group of objects to match my orthogonal UCS?
In model space if i go to layers manager and turn off a layer why does it still show up in model space. Civil 3d 2013
View 4 Replies View RelatedI'm using Gimp 2.8 with Windows 7 on two monitors. I am unable to find the layers window, or a place in the menus to turn it on or off.
View 3 Replies View RelatedI wanted to ask if by chance any of the scripting gurus here happen to have written an AI script that will take a number of selected sublayers/sub-sublayers and move them so they become top-level layers?
I am really needing this very badly, given that After Effects can only handle AI layers as separate entities. So I find myself moving tens, even hundreds of nested sublayers to the top level all the time.
Is it possible this script exists already?
How do i Turn Multiple Text Layers into 1 Layer Style?
View 1 Replies View RelatedI've only just started having a problem with Photoshop. I'm running it on Mac OSX
My images will randomly take a chunk out of all layers, and the background will turn black where it was originally white. In one case all the layers on my canvas were distorted by a checker pattern of bright colours. All the images I am currently working on are in RGB mode which were hand drawn black and white images that were scanned.
I'm not sure what is going on but closing the image without saving and the closing photoshop and even restarting my computer doesn't seem to fix the problem.
20110421veiwports turning off.jpg AutoCAD isnt being nice to me lately another hassle i have is the viewports randomly turn off ( they dont show anything) and when i turn those ones on, others turn off.
i dont know how to change the topic to "solved" however a collegue told me to enter MAXACTVP at the command line the value was 16, i was told to set it to 64 ( i had 21 viewports ) and they all came on.
I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.
We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the “Machines” layer in the master and it hides the “Machines” layer in all the X-ref.
Side Note: If you were going to make the suggestion “use Xbind” I’ve tried it and it doesn’t work well because “Xbind” creates a new layer you have to assign to things instead of making the layers relate to one another.
I am just starting to learn C# and .NET and I am trying to write a simple program to gather all the layers from a drawing in a directory, save them to a list, and use that list to change those layers to the appropriate layers. The way I want it to iterate is open the first drawing, gather the layers, ask the user which layer they want to change the original layer to, and when they select the new layer, it associates that old layer with the new layer so that in the future it won't prompt the user, it will just change it to that layer. Then it changes the layers and goes to the next drawing.
I wrote something very simple in LISP, but I need to make it more advanced and try to add in more features. Specifically I would like to be able to do everything in the background, without actually opening the drawings so I can avoid any user prompts or dialogue boxes.
I am at a complete loss at where to start though. There are so many members in the different namespaces for Autocad. Right now I am looking through acdbmgd.dll and acmgd.dll to try and find something useful, but I have no idea where to even start.
My guess would be to first define a method that gathers the layers from the drawing and saves them to an array. For example i would have multiple arrays for the different layers to which I want to convert the old layers, string [] 0layer, string [] walllayer that contains all of the layers to be changed to layer 0 and wall layer. Then I would compare the layers in the drawing to those arrays, if they are not present in any of the arrays, the program would prompt the user and ask which layers they want to change the existing layer to and add it to the appropriate drawing. Then all of the layers in those arrays would be changed to the different new layers.
At the very least, I am going to start making the different arrays to be filled. That much I can do. I'm just having trouble actually getting the data from the drawings.