AutoCad :: Turn Snap Off On A Set Of Layers
Apr 27, 2013I was wondering if it's possible to turn snap off on a set of layers whilst keeping it on for others?
View 2 Replies
ADVERTISEMENT
AutoCAD 2013 :: Turn Off Snap To Certain Layers?
Feb 7, 2013I often draw over topography lines and use them for reference but I don't want to snap to them. Is there any way to view an object and turn off snapping only for that specific object or layer? For instance, can you make frozen layers visible somehow so they can be viewed, but not snapped to? Or is there another way to accomplish this?
View 4 Replies View RelatedAutoCad :: Turn Snap Mode Off Globally (Snap Not Osnap)
Nov 8, 2011We recently had a draftsman that drew with snap on (he no longer works here), and now all the drawings he worked on have this setting turned on. I thought it would be as simple as opening up the drawings and either hitting F9 or clicking on the toggle to turn off snap. That doesn't seem to be the case. Snap mode seems to be tied to individual sheets, and every viewport. I have multiple sheets in a drawing and each sheet has multiple viewports. The last thing I want to do is open every drawing, click in every viewport on every sheet to turn off snap.
I have snapmode set to 0, but it will only turn it of in whatever sheet or viewport is active. I have to write a lisp routine that will go through every viewport on every sheet to set snapmode to 0?
CorelDRAW X6 :: 6.2 SNAP - Cannot Get Snap To Grid To Turn Off
Nov 30, 2012Snap commands in X6? I can not get the snap to grid to turn off. The button is off and the setting is set to off in options. Objects seem to snap all over not just to the grid. And the grid snap seems to be out of alignment-I cant seem to get objects to snap exactly to the grid.
The same files reopened in X5 are fine. This started with yesterdays install of 6.2. leaving X2 completely unusable.
AutoCAD Inventor :: Turn Off Midpoint Snap?
May 16, 2006IV11, IDW.Is there a way to Disable Midpoint snapping while Dimensioning?It seems to get in the way a lot.A lot of the Lines i have to dimension are small and it's Always trying to dimension to the Midpoints of them rather than end points.Not a bad concept.. just in my case it really gets in the way..So just wondering if there is a setting somewhere to turn it off?
View 9 Replies View RelatedAutoCAD 2013 :: Setting That Will Turn On Snap All Of The Time?
Sep 24, 2013Setting that will turn on snap all of the time instead of just when a command is active. You can't even tell that snap is on unless certain commands are active. The cursors doesn't snap on the BREAK command thus I can't use a two point break with any accuracy because the cursor doesn't snap until after the object is selected.
I need snap ALL THE TIME not just when certain commands are active.
AutoCad :: Turn On Snap All Of Time Instead Of Just When Command Is Active?
Sep 24, 2013I only thought I hated microsoft. Any settings that will turn on snap all of the time instead of just when a command is active.
View 9 Replies View RelatedIllustrator :: Turn Off Snap To Grid?
Jul 25, 2013Is there away to turn off "Snap to Grid"? You find it under View - Perspective Grid - Snap to Grid. I can turn it off by clicking on it to turn off but it won't stay turned off. I tired to go into my preferences to see if you can keep it off in your setting but I do not see it. A lot of discussion boards talk about in the Transform window "Align new objects to pixel grid" and that is turned off.
View 1 Replies View RelatedIllustrator :: Snap To Pixel Grid Won't Turn Off
Aug 2, 2013OS X 10.8.4, CS6 Illustrator
Working with web icons, and I can not get some things to line up with each other. Either to the left or to the right. I've shut off snap to pixel grid in transform palette.
Is there another, overall way to turn this off?
Illustrator :: How To Turn Off Snap To Pixel Grid
Apr 29, 2011I guess I created a file with Snap to Pixel Grid turned on.Can't figure out how to turn this off.Created a new file without Pixel Grid Snap enabled and pasted the art into it...still had trouble with aligning points correctly. how to turn off Snap To Pixel Grid?
View 10 Replies View RelatedAutoCAD .NET :: Can't Snap Locked Layers
May 12, 2012I need an overrule that can not snaps object in all locked layers. How to do that.
View 9 Replies View RelatedVideoStudio :: Turn Off Timeline Snap To Closest Clip Function?
Apr 4, 2013Is there any way to turn off the Timeline 'snap to closest clip' function. I want a small gap between some clips.
View 3 Replies View RelatedAutoCad 3D :: Button To Allow To Snap To Different Layers Whilst Drawing
Jan 16, 2012I am working on Autocad 2012, and am having a problem drawing on faces under another face, whilst working on 3d objects. I have the view set to 2d wireframe, and can select objects underneath whilst not drawing/modifying anything, however as soon as i try to draw it just selects the uppermost face to draw on.
Is there a button to allow me to snap to different layers whilst drawing?
GIMP :: Layers Turn Into Text Layers?
Jul 2, 2013my gimp 2.8.6 makes majority normal layers turn into text layers..
Even if i "discard text information" from layer..and then save it as .xcf it doesnt work! Same layers appear as text layers when i open that .xcf Its not a big deal but it really slows me down when im working with layers..
AutoCAD LT :: Turn All Layers Off?
Aug 30, 2007I know there is a command/button to turn all layers back on if most of them are off, and you want them back on. I use it all the time.
My question: is there a similar command to turn them all off? If not, why not? It makes just as much sense to me. Sometimes I want to turn all of them off, and then just turn one back on.
AutoCAD LT :: Turn Off XREF Layers?
Jul 17, 2012can you turn off XREF layers? i have a set of drawings and in certain layouts, i need to remove layers.
View 4 Replies View RelatedAutoCAD Architecture :: Turn Off All The Layers
Feb 13, 2011I am trying to design a house on AutoCAD Architecture 2011 and I have a bunch of layers that I'm not using but I can't delete. The problem is when I turn off all the layers I am using and I leave the ones I'm not using on their is noting on my screen??? why they are their and why I can't get rid of them. I'm trying to keep everything neat and they're messing me up!!
View 3 Replies View RelatedAutoCad :: How To Turn Off / On Some Layers In Different Layouts
Nov 10, 2011I have found this point today!
If I want to trunoff/on some layers in different layouts, the best way is to use "vp freeze" column in layers properties manager. This way I can manipulate layers' visibility without altering them in MS or other layouts.
Left to "vp freeze" column there is "new vp freeze". I don't know what is this one?
AutoCad :: How To Turn Off Layers In Viewports
Jul 17, 2012I have a one drawing in MS with 5 layers.
I have 2 viewports in one layer tab from that drawing with different scales.
I want to turnoff 2 layers in one of the VP but have them turned on on the other VP.
AutoCad :: Turn On And Shut Off Layers?
Jan 17, 2012What is this used for? From reading, it seems as though if you use this command it is a way to turn on and shut off layers?
View 2 Replies View RelatedAutoCad :: How To Turn Off Any / All Layers That Are Empty
Nov 14, 2013I've "Binged" and "Googled" this for days, and have searched this forum internally with no luck.
I work primarily in GIS of a totally different platform than Auto Desk's offerings so my terminology may be tainted.
(I'm running AutoCad 2005 btw)
How can I tell AC to turn off any/all layers that are empty (i.e. have no objects, no block associations, no rasters etc).
I don't want to purge these empty layers as I will eventually need them.
Scenario:
All layers are turned on and visible, after I have purged empty layers that won't be needed, there are still empty layers left I will need to use later, I wish to turn off only these layers.
(There may be 20 or so layers so I was hoping for a programmatic way of doing this.)
AutoCAD .NET :: Turn Off / On All Layers In Active Document
Jan 5, 2014I would like to turn off all the existing layers in active document. I have found in developer's guide how to turn off one layer with specified layer name but can not apply it on all layers with any layername.
I tried to get all the Object ID's in layer table and then for each object turn layer off but seems that it does not work.
<CommandMethod("FilterLayers")> _Public Sub FilterLayers()'' Get the current document and databaseDim acDoc As Document = Application.DocumentManager.MdiActiveDocumentDim acCurDb As Database = acDoc.Database'' Start a transactionUsing acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()'' Open the Layer table for readDim LayerTable As LayerTable = acTrans.GetObject(acCurDb.LayerTableId, OpenMode.ForRead)Dim LayerTableRecord As LayerTableRecord = acTrans.GetObject(LayerTable.ObjectId, OpenMode.ForWrite)For Each ObjectId In LayerTableLayerTableRecord.IsOff = TrueNext'' Save the changes and dispose of the transactionacTrans.Commit()End UsingEnd Sub
AutoCAD 2010 :: How To Turn Layers Off In Each Viewport
Apr 9, 2013From Model I made 3 view ports. How can I turn layers off in each viewport?
View 9 Replies View RelatedAutoCAD 2013 :: Turn Off All Layers At The Same Time?
Mar 25, 2013I have lots of layers and I need to turn off all of them not one by one.
View 9 Replies View RelatedAutoCad :: Turn Layers In Filters On / Off With Button?
Sep 14, 2009How to turn on/off the layers in a filter?
In our company we use standard layerfilters, so they should be the same name in every drawing (else its gonna be a good idea to do so).
If i know the command on how to turn off of on layers who are set in a filter i can make a macro to do it for me, but i dunno if there is an way to turn of those layers with an command.
AutoCAD 2013 :: Layers Turn Off When Changing Views?
Jan 2, 2013Every time I change views in 2013, new layers added to the drawing turn off. How do I stop this? The active layer also defalts to the active one I started with.
View 1 Replies View RelatedAutoCad :: How Layer Locked In Turn Not Affecting Other Layers
Apr 27, 2012I have a question regarding AutoCAD 2012 and when it comes to locking layers.
When working on the basement layer I would like to see that layer locked in turn not affecting my other layers, ie: my house/garage/second-floor.
AutoCAD 2013 :: Turn On / Off Layers In Current Viewport Only
Feb 27, 2013Turn on/off layers in the current viewport only, I’m wondering if there is a command that can be plugged on the “quick access toolbar” by which one can turn on/off layers in the current viewport only.
The available command to do so is “Freeze and thaw in current viewport” (attached) and it sounds it can’t be plugged in the “quick access toolbar”!
Is there a way to plug the command “Freeze and thaw in current viewport” in the “quick access toolbar” (attached)?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Multiple Xref Layers - How To Turn Off At Once
Sep 18, 2013I made an autocad file. with many xref files. there are layers. and the layers are all the same, only the name for the layer its the name of the xref link . but how can i turn it off at once.
View 9 Replies View RelatedAutoCad :: All Frozen Layers Turn On When Opening File?
Jul 19, 2011I don't have this problem on all my files, only a select few. When i save a file and reopen, all the viewports in which I have frozen layers are all reset. All layers are turned back on and I have to go through every viewport and refreeze layers. This problem has persisted long enough that I unfortunately know when I close a file I will have to reorganize the layers next time I open the file. Is this a setting issue or this a bug in the file?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Turn Off All Frozen Layers
Feb 13, 2013I have an old routine that freezes layers that are off. I would like it to also turn off layers that are frozen. It took a while but I think I figured out how the old routine works. I was having trouble determining how the routine would know if a layer was off or not. I found if the color was a negative number that meant the layer was off (cond ((< (dxf 62 l) 0) (command "f" (dxf 2 l)))). How do I tell if the layer is frozen?
I was also wondering what the character was after the DXF code ie. (dxf 62 l). Is is a lowercase L or an upper case i and what function does it have?
Below is the old routine that freezes layers that are off.
(defun c:fo (/ l dxf code list)
(defun dxf (code list)
(cdr (assoc code list))
);defun
(setq l (tblnext "layer" T))
[code].........