I just received 2013 lt and want to know the best solution for setting up a HP Designjet 750c Plus to begin plotting. Apparently there is no support from HP for Windows 7 drivers. I'm no expert but what I've read it seems that I can use the HDI driver. Go slow since this i new to me.
View 2 RepliesI'm just looking to find the appropriate driver for a HP Designjet 750C for 64-bit windows 7
View 9 Replies View RelatedAlthough automatic rotating is on, the HP plotter DesignJet 500 plus uses the paper wasting method.
In the layout preview of Civil 3D 2012 the result looks good, but I need one meter of the paper roll for this plot.
I just downloaded and installed Infrastructure Design Suite Premium which includes AutoCAD 2013. For some reason the PDF drivers are not working, and I have already gone through the add a plotter wizard to no avail. One thing to note is I still have AutoCAD LT 2010 on my machine, and all the print drivers work fine for it. Perhaps there is some kind of conflict between the two CAD programs on one machine?
View 9 Replies View RelatedWe are planning on upgrading our CAD workstations. At the moment we are having problems (crashing) running Autocad 2014 and Plant 3D in 2014 version. Unfortunately our graphic cards (Quadro 4000) are not listed in the list with certified drivers, so getting any support on this subject is not possible. So currently we are still running AC2013 and it works fine.
For our new workstations we want to be sure all our hardware will be fully compatible (for that reason we only buy 1 first). If I look into the certified drivers list; [URL]....... I can mostly see older cards. When will newer cards/drivers be tested? We would like to re-use our quadro4000 or buy quadro K4000 or K2000. (Actually we were never impressed by the quadro4000, the quadro2000 would probably have been almost just as good at a much lower price.)
I've just installed Autocad 2013 and everything seems fine apart from that I cannot select my plotter, when i select it, it just goes back to "none". I've had a play around but nothing seems to work.
View 5 Replies View RelatedSince we've migrated to Windows 8 64b we have problems wih plotting some layouts. If I select my plotter it automatically goes to none after selecting and sometimes I get the following error message:
Most of the times I can use the plotter in the other layouts / drawings, but sometimes I have to restart AutoCAD or reboot the computer before the plotter works again. In some layouts we keep getting this problem even after reboot. I've tried reinstalling the plotter (with different drivers), tried different computers, purge and recover the drawings but no luck. The Plotter is a HP Designjet 800.
When I try to add a plotter, I get a message, "No DRC files were found in Autocad 2013 - English drivers directory."
The DRC files are in the DRVen-US directory, and is in my drivers search path. I have even changed the order of the search path to place that directory first, but no joy.
How do I get my CTB file into my plotter manager? It keeps asking for a PC3 or PC2 type file. The plotter style manager creates only a CTB. The old autocad version HAD a "plot style" pic window. this one does not. I want to create a "plotter" that writes PDF's using my CTB file info.
View 6 Replies View RelatedDWG To PDF from the list Plotter has been removed, How to turn?
View 2 Replies View RelatedHow do I get the built-in PDF plotter quality up to my adobe pdf plotter. I want to do use publisher and make mulitple page pdf's and as I understand it I have to use the built-in plotter to do it. As of right now I have to sperate pages with adobe and then combie them to make a single pdf.
(how the built-in PDF plotter looks)
(How I want to have the built-in plotter look.) Without changing settings in my pdf viewer, I need to be able to send these out to customers.
I'm useing AutoCAD LT 2010
I've recently (this morning) come into the issue of the old plot printers being saved in CAD files. I've found a number of tutorials online about adding new pages, and setting the default plotter to "none" via DWGTruView, but these are just shy of what I'm looking for.
Is there any way to tell AutoCad 2013 that if the current/default plotter is "None" to set it to a certain printer? I have about a thousand CAD files that need this change made on them, so obviously a more automated approach would be greatly appriciated. Currently the entire set of them has has their Plotters set to "None", and a custom Page Setup configured.
I am using AutoCAD LT 2013 and at the moment i am just using the dwg to pdf.pc3 included in AutoCAD.
All of the text in my drawings is the same font (ISOCPAUS). Up until about a week ago, i could plot bold & italic text using the dwg to pdf plotter. Now, I cannot and i don't know what has changed to make this happen. Underlined and overlined text still plots fine to pdf. Everything appears correct in model space, paper space layouts, in previews and if i plot to any of the printers in the office, but once i plot to pdf, the bold and italic is gone.
I have an HP DesignJet T1200. We are using AutoCad Civil 3D to plot large files that were exported from PLS CAD. These files contain multiple ECW's that average 5-10 megs each. Is there a customization we need to set to get the plotting time down.
Currently it takes 8-10 min for AutoCad to process the plot and once it is sent it takes another 8-10 min for the plotter to start plotting.This is telling me that there is something wrong with our setup. (see below)
workstations = DELL T3500 with Windows XP Pro; Intell Xeon 320GHz; Nvidia Quadro 4000/2g onboard RAM; 4g system RAM
Plotter = HP DesignJet T2100 on network
We usually have projects that contain 150-200 drawings that we need to work on and plot per project. This plotting time is killing our productivity!
I have just recently started experiencing printing problems to my HP Designjet T1100 with 2007 LT. This issue started about a 2 weeks ago. When trying to print out a large scale drawing it terminates about 1/4 of the way through the print. There are no errors on the printer or in the print manager.
To date I have uninstalled and reinstalled 2007 LT; updated the printer firmware; updated the printer software driver.
I am trying to plot a layout sheet 24'' W x 18" H. The frame on my sheet is 22''W x 16''L (inside the dash lines limits we see on the layout). I believe I prepare the print correctly:
- Select the printer (HP DESIGN JET PS)
- I use the window fonction to select the printable area ( left upper corner and then the opposite corner).
- Select Paper size Arch C (landscape)
- Paper orientation: Lansdcape
The preview shows that the upper and bottom lines of my frame will not print, and they do not, even if I try (see the attachement below).
Is this a driver problem?
I have a problem with print from Autodesk Mechanical on a HP Designjet 500 24.
The system is a Windows 7 Professional 64bit.
When I select the printer, the printer returns to "none".
I have tried several drivers, the HP Designjet 500 plus 24 or HP DesignJet 500 24+HPGL2 card.
I can select the HP DesignJet 500 24+HPGL2 card, but since that driver is incorrect for my printer, it doesn't print.
I have found this same problem for a HP Designjet T610.
Here is says to use a driver version from 10 feb 2010 or later. But there isn't any driver around or after this date for the HP Designjet 500.
Other program's can print just fine through the original HP Designjet 500 24 driver.
Client machines are windows7 64bit sp1.Having issues with one plotter at this point-- HP DesignJet T1200 HD MFP.
.This plotter worked fine with AutoCAD 2013 Autodesk software uses windows printer objects for printing not pc3s.
Plotter driver is the newest hpgl2 off hp's website for that plotter.
So far crashes when attempting to plot from autocad and revit. Gets the attached message.
Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...
View 3 Replies View RelatedQuick question on driver updates. Do I still need to update the "Graphics Databases" XML files when I update the graphics drivers on an Inventor and/or AutoCAD 2013 or 2014 workstation? If so, where can I find the latest versions of the XML files?
It used to be easy to get the databases, they where provided with the drivers on the Autodesk Certified Hardware website. Now, I can't find them anywhere.
the top image is printed from Adobe Photoshop CS 5.1 57" wide and 137" tall to an HP DesignJet Z6200PS 60" color inkjet plotter. The print preview shows that the image looks good and should come out correctly (as the lower image did when printed to a DesignJet Z6200PS as a .PDF file from Adobe Acrobat Reader).
Why is the image printing correctly as a .PDF from Acrobat Reader but not as a JPEG from Photoshop CS 5.1 (same source image)?
how to get line weights defined through Inventor? After printing or output to PDF I can barely read the dimensions. Is this with the drawing setup? or with the printers?
View 1 Replies View RelatedWe have been running Windows XP-Pro (32 Bit) withAutocad Mechanical 2011 using a Calcomp Drawing Board-III and the TWSER2kXp.exe driver, everything is running fine. We want to switch over to Window-7 running 64 Bit and I want to know if our older driver will work as before and if not what driver do I need to use to define the tablet areas of the menu and be able to use our 16 button pucks.
View 4 Replies View RelatedBy default, the PDF print drivers we use (Bluebeam, PDF 995) set True Type text handling to be "as graphics" rather than "as text" (see below), which makes for some ugly text. I know I can make this change and save as a .PC3 file, but all our page setups for sheets & templates in the office all reference these default drivers, so it would be preferable to change the way the default driver works if possible. Is the default plotter configuration editable?
View 3 Replies View RelatedI just bought a HP Designjet Z3100. And I can’t get the colors right. Everything looks great on the screen but then I print I get this ugly strong light green color. I have really tried different settings without success I have also tried X4 and X5 with the same result.
Everything is ok if I export the file to PDF and then print, but then I print from the cdr file its get very ugly.
I have the same problem with other printers but then I change the printer’s own settings to Saturation in the color settings.
I have uploaded some files to: [URL] ...
CDR file = This is one example of the files I can’t print.
PDF output = The same file as the CDR that looks good then I print it.
ugly green = This is how the print looks like (I get these colors then I use my Nitro PDF printer)
I bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies View RelatedI am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I have a template with layouts of different sizes that had been working fine with a previous Xerox 6204. My D size and E size automatically oriented with the 36" side parallel to the roll feed. I have since moved to a job that got a Designjet T2300. On this machine the D size orients the 24" side parallel. This wastes 1' of paper on the left and uses 1' extra as it runs the 36" side perpendicular. I have been unable to rectify the problem. I have tried printing in portrait, that actually cut off some of the image. I have tried all types of rotation within the driver and layouts. Tech support had me going into the machine settings and set rotation to 90. Nothing. There is a warning that "HP utilities" is not installed. Could this be a remedy? When the tech came to set up the printer he installed the necessary drivers but mad no mention of this utility.
AC2012, HP desighjet T2300
having trouble with rendering with iray on 3ds max 2013. All goes well for the first 2 hours or so and then the drivers crash with error code 4101 ( Display driver nvlddmkm stopped responding and has successfully recovered.) This then kills the render. ive tried updating my mobo bios asus p9x79 to latest verion from 2104 to 3305. this had no effect. im using a gtx 670 ftw 4gb with 3104.07 drivers and 80.04.4b.00.70 firmware is installed. 3ds max is updated to update 6 This is on a clean install of windows drivers and apps. this is killing me ive got stuff that needs to get done and i just cant do it at the moment.
asus p9x79 mobo
Coursair vengance 1600mhz 16gb
gtx 670 ftw 4gb
coursair A860 psu.
windows 7 64bit
which are the best nvidia drivers version for Photoshop cs6 64 bit , windows 7 64bit. Did you notice a better performance for gpu features.
View 2 Replies View RelatedAre there drivers to download for a typical touch screen monitor to enable it to have drawing capilities (probably wacom or something similar) for windows 7 (such as pressure sensativity and be able to rest drawing hand on monitor without reading it)
View 1 Replies View Related