I just downloaded and installed Infrastructure Design Suite Premium which includes AutoCAD 2013. For some reason the PDF drivers are not working, and I have already gone through the add a plotter wizard to no avail. One thing to note is I still have AutoCAD LT 2010 on my machine, and all the print drivers work fine for it. Perhaps there is some kind of conflict between the two CAD programs on one machine?
View 9 RepliesBy default, the PDF print drivers we use (Bluebeam, PDF 995) set True Type text handling to be "as graphics" rather than "as text" (see below), which makes for some ugly text. I know I can make this change and save as a .PC3 file, but all our page setups for sheets & templates in the office all reference these default drivers, so it would be preferable to change the way the default driver works if possible. Is the default plotter configuration editable?
View 3 Replies View RelatedI just received 2013 lt and want to know the best solution for setting up a HP Designjet 750c Plus to begin plotting. Apparently there is no support from HP for Windows 7 drivers. I'm no expert but what I've read it seems that I can use the HDI driver. Go slow since this i new to me.
View 2 Replies View RelatedWe are planning on upgrading our CAD workstations. At the moment we are having problems (crashing) running Autocad 2014 and Plant 3D in 2014 version. Unfortunately our graphic cards (Quadro 4000) are not listed in the list with certified drivers, so getting any support on this subject is not possible. So currently we are still running AC2013 and it works fine.
For our new workstations we want to be sure all our hardware will be fully compatible (for that reason we only buy 1 first). If I look into the certified drivers list; [URL]....... I can mostly see older cards. When will newer cards/drivers be tested? We would like to re-use our quadro4000 or buy quadro K4000 or K2000. (Actually we were never impressed by the quadro4000, the quadro2000 would probably have been almost just as good at a much lower price.)
In the Add-A-Plotter-Wizard I see 'select driver' but it is greyed-out. I thought I may need administrative rights to change it so I got IT to try it and it was stilled greyed-out.
How do you change plot drivers?
Okay. So our designer is using autocad 2013. He is using a pc and he is sending me the files (i'm on a mac) and the thinest lines do not show or print. But, they print/show on a pc! I need to be able to print these. I've searched the web and found nothing.
View 3 Replies View RelatedAutocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
I could not print, save, make any changes to one particular drawing which was created ion Autocad 2013. Whenever I tried to work on the file attached error message pops up and Autocad program gets closed.
View 7 Replies View RelatedQuick question on driver updates. Do I still need to update the "Graphics Databases" XML files when I update the graphics drivers on an Inventor and/or AutoCAD 2013 or 2014 workstation? If so, where can I find the latest versions of the XML files?
It used to be easy to get the databases, they where provided with the drivers on the Autodesk Certified Hardware website. Now, I can't find them anywhere.
how to get line weights defined through Inventor? After printing or output to PDF I can barely read the dimensions. Is this with the drawing setup? or with the printers?
View 1 Replies View RelatedWe have been running Windows XP-Pro (32 Bit) withAutocad Mechanical 2011 using a Calcomp Drawing Board-III and the TWSER2kXp.exe driver, everything is running fine. We want to switch over to Window-7 running 64 Bit and I want to know if our older driver will work as before and if not what driver do I need to use to define the tablet areas of the menu and be able to use our 16 button pucks.
View 4 Replies View RelatedI bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies View RelatedHow can i insert a JPG that will print?
I'm using the Insert > Reference > Attach command but the image in the JPG does not print.
having trouble with rendering with iray on 3ds max 2013. All goes well for the first 2 hours or so and then the drivers crash with error code 4101 ( Display driver nvlddmkm stopped responding and has successfully recovered.) This then kills the render. ive tried updating my mobo bios asus p9x79 to latest verion from 2104 to 3305. this had no effect. im using a gtx 670 ftw 4gb with 3104.07 drivers and 80.04.4b.00.70 firmware is installed. 3ds max is updated to update 6 This is on a clean install of windows drivers and apps. this is killing me ive got stuff that needs to get done and i just cant do it at the moment.
asus p9x79 mobo
Coursair vengance 1600mhz 16gb
gtx 670 ftw 4gb
coursair A860 psu.
windows 7 64bit
How can i adjust the area I want to print? I mean the dashed line. What i need to do is print out a map and i want it to cover the entire paper, without any bords around it.
View 5 Replies View RelatedI have autocad 2013 student version installed on a MacBook Pro with OSX mountain lion, worked properly, but now I can not print anything in paper, pdf, or preview. I just try re-installing the software, creating new layout, select the printer from "Edit page setup" menu, without any results.
View 2 Replies View RelatedIs there a way to have only part of the text in a multileader highlighted for printing out?
View 1 Replies View RelatedWe are in the process of upgrading from AutoCAD 2010 to 2013. The print screen key on the keyboard will not work in the 2013 version (using Snagit to capture the screen image). Changing the hot key (in Snagit) works but I'm trying to keep the same workflow for my 300 plus Users.
View 2 Replies View RelatedI'm trying to print a 2D drawing but I would like to add the 3D solid for viewing reference. I can't seem to "flip/rotate" my 3D solid to obtain an isometric view while looking at my 2D drawing from the top view.
how I can get both items to print on a single plot?
I work for a home builder and I receive the drawings in autocad format. Each house drawing comes in autocad but each floor plan and elevation is represented by a "layer state".
Each of these drawings has 7 to 9 pages and when I want to print each of those pages, I have to do it "one by one" as I have to switch between layer states.
So, each file has a layer state for: basement plan, main floor, second floor, etc. I want to find a way that I can print (convert to pdf), all these drawings, rather than going by each "layer state"
I received a layout of a building from a architect. When I try to print it out it is extreemly light. This happens no mater what printer or ploter I use. I have changed line weight with no success.
It seems to always happen when I get a building drawing from an arhitect.
Even the new items I have drawn like conveyors , tables stc. come out nearly invisable.
which are the best nvidia drivers version for Photoshop cs6 64 bit , windows 7 64bit. Did you notice a better performance for gpu features.
View 2 Replies View RelatedAre there drivers to download for a typical touch screen monitor to enable it to have drawing capilities (probably wacom or something similar) for windows 7 (such as pressure sensativity and be able to rest drawing hand on monitor without reading it)
View 1 Replies View RelatedAre CUDA drivers ( NVIDIA GeForce GT 650M (CUDA) ) support 3D for PS CC?
View 6 Replies View Relatedi have 1 camcorder in firewire 1394 MiniDV to record in my computer. The drivers is ok, the camcorder function well on other pc with corel x4 or pinnacle, but on the pc with x5 ultimate, when i want to make capture i have message error "not connecting or no drivers..."
View 14 Replies View RelatedI have just installed Video Studio 5 and using my Canon XH/A1 HDD camera I get the following message " can not change to capture mode --check video capture driver is working properly" .Does this mean there is not a driver for my camera and secondly how do you 'check your driver is working properly'.
View 2 Replies View RelatedI am starting to have system instability....BSOD 0x00000024 / 0x0000001E, warm boots before the login screen, and weird behavior like the NTFS file system not working ( causing corrupt saves ), superfetch shutting down, Photoshop minimizing - maximising then windows shutting down........Odd
A virus is not out of the question but before I reformat etc I was wondering if the Beta Wacom drivers has caused any issues on other systems. Looking at the reliability records the graph is pointing downward exactly at and after the date I installed the drivers.
Just troubleshooting....
OS Vista Ultimate x64 SP1
CPU intel q9650 3ghz
Motherboard Asus p5q deluxe
Memory 16gb (4x4gb) OCZ PC6400 C5
Graphics Card Nvidia 8800GTS 640mb
Sound Card on board
Monitor(s) Displays Eizo CG301w, Dell 2407
Screen Resolution 2560 x 1600 + 1920 x1200
Keyboard apple slim aluminum jobbie
Mouse intellimouse
PSU ocz 600w
Case coolermaster stacker
Cooling many fans
Hard Drives Raptor 74gb, Raptor 150gb, 500gb x2, 320gb.
Other Info Wacom A3 tablet, Epson 3800
New drivers (version 4.93-3) dated Oct 07, 2005 are available for the following Wacom tablets: Intuos3, Intuos2, Intuos1, Graphire2, Graphire, CintiqPartner, Cintiq 21UX, 18SX, 15X and PL 500 on Windows 2000, XP or XP x64, MacOS X 10.2.8 and later.
View 6 Replies View RelatedHow do I update nvidia drivers? Vista Home Premium 64 I have 9800 GT. I've down-loaded latest drivers but I'm not sure how to install. Do I need to delete present driver BEFORE installing? And, if so, how? OR, do I go to DEVICE MANAGER> DISPLAY ADAPTERS> UPDATE DRIVER?I'd like to be able to roll back, if necessary. I know this is a common thing for most, but I hate making any changes to my system.
View 2 Replies View RelatedI need to convert a Cad file into a PDF file. Unfortunately, the PDF file won't print. The first time I had this problem was I converted it with the layers on the PDF file. What I did last time was this:
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Fon Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's not printing the way as it should. I don't know what other option I have in order the print corretly.
Having issues using the accoreconsole.exe, to batch plot drawing to pdf?
none of our embedded images/logos get plotted. im guessing it doesn't support images yet.
i was excited about this addition (it would save me hours a week), but not anymore back to the publisher we go