AutoCAD 2013 :: Insert A JPG That Will Print
Jan 10, 2014How can i insert a JPG that will print?
I'm using the Insert > Reference > Attach command but the image in the JPG does not print.
ADVERTISEMENT
AutoCAD 2013 :: Insert Scale Bar?
Aug 22, 2013Is it possible to insert a scale bar? I have searched all over but the only instruction I got was to click insert scale bar in the annotation pallette, but no such thing exists. Surely this should be easy enough?
View 9 Replies View RelatedAutoCAD 2013 :: Scaling After Insert
Jan 21, 2013This is in Acad 2013. This wasn't happening last week, and I don't know what changed. I have a small drawing file with a few point blocks with attributes and some lines I'm trying to insert into a main drawing. I've made sure that both files are set to "unitless" in the following variables:
INSUNITS = 0
INSUNITSDEFSOURCE = 0
INSUNITSDEFTARGET = 0
I've run SCALELISTEDIT on both files and reset them to "metric and imperial scales", and saved both files. The base points in both drawings are 0,0,0. Both files are in the WCS.
I've run audit on both files. I've run purge in the main drawing to make sure it doesn't already contain a definition of the small drawing. I've rebooted the PC and restarted acad.
When I insert the small drawing into the main drawing, the points come in at the correct coordinates. But the lines connecting them and the point block attributes are scaled up by 39.3700787400 and are far away.
AutoCAD 2013 :: 2013 Thin Lines Do Not Print On Mac?
Feb 15, 2013Okay. So our designer is using autocad 2013. He is using a pc and he is sending me the files (i'm on a mac) and the thinest lines do not show or print. But, they print/show on a pc! I need to be able to print these. I've searched the web and found nothing.
View 3 Replies View RelatedAutoCAD 2013 :: X64 And DWG TrueView 2013 X64 Crash When Print?
Aug 29, 2012Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
AutoCAD 2013 :: 2013 Print / Save / Changes Error
Feb 25, 2013I could not print, save, make any changes to one particular drawing which was created ion Autocad 2013. Whenever I tried to work on the file attached error message pops up and Autocad program gets closed.
View 7 Replies View RelatedAutoCAD 2013 :: Automated Title Block Insert?
Dec 11, 2013Im wondering if there is a fast and atuomated way to insert a title block onto the layout tab throughout an existing project?
View 1 Replies View RelatedAutoCAD 2013 :: Insert Image Drag And Drop
Apr 24, 2013sometimes i like to insert image into a Dwg. In 2012 i use to drag and drop the image from the source folder to autocad screen then i had the insert instructions, scale, position etc.
But i can't drag and drop images anymore in 2013, i have to use _imageattach icon to open the open manager then select an image.
Is there a way to reactivate the drag and drop feature in 2013 ? Must be a Variable to autorise that.
AutoCAD 2013 :: Insert Multiple Blocks Using Script?
Nov 15, 2013It inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies View RelatedAutoCAD 2013 :: How To Insert Multiple Blocks At Same Time
Dec 3, 2012I was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
AutoCAD 2013 :: How To Insert Aerials (TIFF Files)
Feb 20, 2013I recently changed jobs and my employer did not purchase AutoCAD 2013 Civil 3D instead they only purchased AutoCAD 2013 (plain). I have to work with aerial and I recived all of our county areals which are on a state plain coordinate system. However when I bring the aerials into AutoCAD 2013 via the "ImageAttach" command the aerals come in at 0,0 and just pile up on each other and they are not to the correct scale. I could just move the aerials and try to rescale them and attach them at the corners but the areals are overlapped so this chore is not very acurate lining them up. I said all this to ask..........Is there a way to insert aerials (tif files) into AutoCAD 2013 (plain edition) so that they come in in the correct coordinate location and the correct scale? I know in AutoCAD Civil 3D you could go to the Map module and insert the aerials and they would come in in the right geodetic location. And incase you need to know, the directory I have the aerials stored in has the "tif" , "aux", and the "tfw" files.
View 5 Replies View RelatedAutoCAD 2013 :: Insert Field From The Name On Paper Space Tab
Sep 9, 2013I know I can create text and use "Insert Field" to have the filename automatically update in the title block. Is there a way to do the same thing with layout names when there are multiple layouts in one drawing file?
View 2 Replies View RelatedAutoCAD 2013 :: Insert Block Menu Not Coming Up
Jun 27, 2012I'm having an issue with block selection menu not coming up- specifically when inserting a new block. When I click the icon, the menu flickers but then disappers. If I click anywhere on my screen, I get a error noise as if the menu is open and I have to press esc to be able to function CAD again. The same error happens when I want to print when I click "edit page setup" nothing shows up, yet I get the error noise as if it is up but nothing is there. All of this worked at one time, but when I was trying to create a new block, somehow I must have turned something off.
View 4 Replies View RelatedAutoCAD 2013 :: Insert A Block Using Selection Of Points
May 20, 2013I'd like to insert a block into a big selection of points. Any way or have I to look at customization routines.
View 3 Replies View RelatedAutoCAD 2013 :: Insert Tab - Content Panel Is Missing
Nov 9, 2012I am looking to reach the Autodesk Seek function from the ribbon menu, but cannot find the Content Panel on the Insert Tab. I did a little poking around in the .cuix, through the cui customization command, but cannot even find it. Is there a way to download this, or has the feature been removed for ACAD 2013?
View 6 Replies View RelatedAutoCAD 2013 :: Insert Word Document By OLE Object Function
Jul 10, 2013I want to insert a word document with several pages in autocad by the OLE OBJECT function. The problem is the insert only the first page. How to follow the other pages?
View 9 Replies View RelatedAutoCAD 2013 :: Insert Command Turn Off Dynamic Input
Feb 13, 2013Why AutoCAD 2013 turn off dynamic input when we use the insert command. It happens only when using dynamic blocks.
View 5 Replies View RelatedAutoCAD 2013 :: How To Insert DXF File To Drawing With Original Scale
Jun 19, 2012I am working with surveying points and what I used to do was insert the dxf file containing the points to my drawing and they would be inserted with their correct scale. However, now in AutoCAD 2013, when I insert them they are in a different scale and I must adjust them. Is there anyway to have their original scale carry over in 2013?
View 4 Replies View RelatedAutoCAD 2013 :: Block Editing - Redefining Insert Point
May 1, 2013In previous versions of AutoCad I would just double click on a block do my changes click the save changes button and then a save dialogue would come up with an option to change the insert point. Did this option go away in 2013 AutoCAD? I do not get this option anymore after I finish editing a block? This is very useful. Why would this go away?
View 6 Replies View RelatedAutoCAD 2013 :: Insert Sheet List Table Is Not Active?
Nov 6, 2013“insert sheet list table” is not active,
I couldn’t figure out in which cases the “insert sheet list table” (attached) gets not active.
This command is supposed to provide table of contents for the layouts specified in the set of sheets pane
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Editing Architectural Title Block - Cannot Insert Into Drawing
Mar 5, 2013I'm trying to edit an architectural Title Block. I've went into block editor and did attribute definitions. However, when I save it I can't insert it into a drawing. Is there anything I can do to prevent this from happening?
View 2 Replies View RelatedAutoCAD 2013 :: Insert And Scale Dynamic Block From Tool Palette
Apr 25, 2013I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies View RelatedAutoCAD 2013 :: Blocks Insert At Different Coordinates From Those Entered In Command Line
Jul 10, 2012I am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedAutoCAD 2013 :: Insert New Tool Icon On Image Context Ribbon?
Mar 26, 2013I'd like to insert an adjust image tool on image context ribbon.
Civil 3D (2013)
AutoCAD 2013 :: Insert Or Import Image That Automatically Recognizes Drawing Coordinates
Oct 28, 2013I want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View Related3ds Max :: Insert Vertex Crashes 2013 Student Edition?
Mar 6, 2014I'm currently working on a design in 3ds Max 2013 Student Edition. When I first found out about 3d modelling, the creativity peaked my interest greatly and since Mesh became available in Second Life and Inworldz, I have since been self teaching myself from Max tutorials.
2 years ago approximately, I downloaded the 3ds Max 2013 from the Autodesk site and upon installing it, the program crashed at 96% faithfully everytime. When I asked how to resolve this, I was told to download the trial version and put the code to authenticate the software, it then went from 30 day trial to student edition.
I have since been using 3ds Max 2013 updating the FBX converter to work with Second Life and Inworldz making low poly designs.
Now my current design has 3587 polys and 6,239 vertices, when I move close to my design and select edge, then insert vertex, 3ds Max says it encountered an error and gives me the option to save my scene or cancel to close Max. 100% of the time, if I say save scene, my scene is automatically corrupt and I have to go to a previous save.
No I am not entitled to install the PU's (Patch Updates) since its a student edition and I don't have the money to purchase 3ds Max 2013.
AutoCAD .NET :: Insert Block From External DWG File / Specify Insert Point By Click Mouse
Apr 2, 2013I write a program, this program needs to insert some standard illustrations. I made these standard illustrations into different blocks. And I store these blocks in a dwg file. Everytime I need to insert some illustrations, I just click the mouse on the current drawing, I want the illustration inserted. These means the following points:
(1) Import the blocks to the current drawing, if the blocks have already been imported, then do nothing.
(2) Specify the insert point by clicking the mouse, and I want the block's insert point to coincide with the mouse clicking point.
AutoCAD 2013 :: No PDF Print Drivers?
Jan 30, 2013I just downloaded and installed Infrastructure Design Suite Premium which includes AutoCAD 2013. For some reason the PDF drivers are not working, and I have already gone through the add a plotter wizard to no avail. One thing to note is I still have AutoCAD LT 2010 on my machine, and all the print drivers work fine for it. Perhaps there is some kind of conflict between the two CAD programs on one machine?
View 9 Replies View RelatedAutoCad :: Insert OS Tiles Into A Drawing Using Insert XRef Command
Aug 2, 2013I am trying to insert OS Tiles into a drawing using the insert x-ref command. I have managed to insert 192 tiles but still need to add 29 more tiles to complete. When I try to insert another x reference AutoCAD just goes into a continual loop. Have to force AutoCAD to crash after ten minutes.
I am using AutoCAD 2014 MAP and have just had a new system built (i5 processor, 8GB RAM).
AutoCAD 2013 :: Adjust The Area To Print?
Nov 23, 2012How can i adjust the area I want to print? I mean the dashed line. What i need to do is print out a map and i want it to cover the entire paper, without any bords around it.
View 5 Replies View RelatedAutoCAD 2013 :: Cannot Print In Paper / PDF Or Preview
Apr 23, 2013I have autocad 2013 student version installed on a MacBook Pro with OSX mountain lion, worked properly, but now I can not print anything in paper, pdf, or preview. I just try re-installing the software, creating new layout, select the printer from "Edit page setup" menu, without any results.
View 2 Replies View Related
