3ds Max :: Insert Vertex Crashes 2013 Student Edition?
Mar 6, 2014
I'm currently working on a design in 3ds Max 2013 Student Edition. When I first found out about 3d modelling, the creativity peaked my interest greatly and since Mesh became available in Second Life and Inworldz, I have since been self teaching myself from Max tutorials.
2 years ago approximately, I downloaded the 3ds Max 2013 from the Autodesk site and upon installing it, the program crashed at 96% faithfully everytime. When I asked how to resolve this, I was told to download the trial version and put the code to authenticate the software, it then went from 30 day trial to student edition.
I have since been using 3ds Max 2013 updating the FBX converter to work with Second Life and Inworldz making low poly designs.
Now my current design has 3587 polys and 6,239 vertices, when I move close to my design and select edge, then insert vertex, 3ds Max says it encountered an error and gives me the option to save my scene or cancel to close Max. 100% of the time, if I say save scene, my scene is automatically corrupt and I have to go to a previous save.
No I am not entitled to install the PU's (Patch Updates) since its a student edition and I don't have the money to purchase 3ds Max 2013.
View 9 Replies
ADVERTISEMENT
Feb 27, 2009
My daughter is studying for her GCSE's and one element is Design Technology where she has photographic assignments.
anyone know if a letter of confirmation from her school confirming that she is a pupil there and is studying for GCSEs would be sufficient for Adobe's needs?
View 10 Replies
View Related
Aug 19, 2009
"You may purchase only one license of any Adobe Student Edition product. This license may be used only on your privately owned computer. Student Edition products may not be resold by the end user." Are the exact words on the Student version page.I was told that this means it can only be installed once.
How true is that?What if I get a new computer?My specific dilemma is that I am on an older computer right now but do not have the money to get a much needed new one till the end of the year.Class has started and I need to use PS cs4.Am I off my rocker?
View 3 Replies
View Related
Aug 21, 2008
I bought the PS CS3 Extended Student Edition and I have registered on the Adobe website to get my serial number which all went fine, but when I put the Disc in the drive, it does not appear on My Computer,Desk Top for me to open and upload photoshop to my computer! I have put the disc into another hard drive and attached it to my monitor but still nothing comes up! I have tried it on a completely different computer and it appears then, just not on mine! My computer seems to be working fine as I am able to upload other discs to it!
View 7 Replies
View Related
Jun 26, 2013
I need some 3D prototype, but there should not be nothing more. I mean any Autodesk logos like in drawings. How to print something from Inventor Student edition?
View 3 Replies
View Related
Sep 12, 2012
I have cs5 extended student and teacher edition - Windows - there is a top level 3D menu available to me. But when I follow instructions to create 3D text, the 3D options are unavailable to me.
View 5 Replies
View Related
Apr 29, 2012
I have repeatedly attempted to export a simple drawing as a PDF and it doesn't take. I get an error message that the plot failed because there is nothing to plot (paraphrased).
Does export as a PDF not work or not in the Student version or?
View 7 Replies
View Related
Mar 7, 2013
I sell limited edition prints of a run of between 350 and 500.
I am trying to get it set up so that my signature and the print number is included as part of the print. Here is an example:
You'll see at bottom left there is my signature and underneath is is the print number e.g. 110/350 (this is legible when printed at 18x12" size).
Inserting the signature and the "/350" is easy since it only needs to be done once per image.
The difficulty comes with inserting the actual print number e.g. "110"
At the moment I have 0 to 9 written out and scanned in as separate numbers. So to make "110" I use the "1" digit twice, plus the "0" digit. I.e. I haven't written out 1 to 500 and scanned them in all as separate numbers, I've just done the 10 digits and use those 10 digits to make all the different numbers I need.
Is there a way to create an action that will create say 350 JPEG copies of the original file, each one with its own unique print number inserted? (And ideally automatically saved with the print number as its file name!)
View 19 Replies
View Related
Oct 10, 2013
know if a file from a student version of autocad 2014 can be used to laser cut or will there be issues of some sort?
View 9 Replies
View Related
Oct 27, 2012
I have an issue with the student version of Maya 2013. This issue is reproducible in my environment when I try to align an edge to a snap point pressing the V key and move the edge with the move tool. May 2013 hang then and I have to close it ending the task in the task manager.Many times I deleted the Maya folder in my documents folder in order to start from the scratch, but it hangs again if I try the procedure i described above. Some times it take more time until Maya hang, some times after a few moves.I have installed Maya 2013 many times from the scratch, deleting before all the directories in the different locations (as described in an Autodesk paper).I have to run Maya 2013 while I need to export my files with an exporter which just work in the 32bit version of Maya.
In the Event log viewer from Windows 7 x64 there are two records during this hang:
Fault bucket 50, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: maya.exe
P2: 13.0.186.0
P3: 4f44e75c
P4: 6ca2
P5: 2048
P6:
P7:
P8:
P9:
P10:
Attached files:
C:UsersLecraAppDataLocalTempWER3959.tmp.appcompat.txt
C:UsersLecraAppDataLocalTempWER39C7.tmp.WERInternalMetadata.xml
These files may be available here:
C:UsersLecraAppDataLocalMicrosoftWindowsWERReportArchiveCritical_maya.exe_8736ecaa762b7ca1a2f14929fe98d82f9482e8_0877449f
Analysis symbol:
Rechecking for solution: 0
Report Id: 382b88ab-2041-11e2-82ba-3860770f5418
Report Status: 0
The second one:
The program maya.exe version 13.0.186.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 18a8
Start Time: 01cdb44cd78b5da1
Termination Time: 65
Application Path: D:PROGRAMSMaya2013inmaya.exe
Report Id:
Installed Maya on three different hard disks (one is a SSD)but no difference.Below my hardware:
HP HPE H8 Desktop Intel Core i7-2600 CPU 3.4GHz, 16GB RAM, 64bit Windows 7, NVIDIA GeForce GTX 550 Ti with 4MB RAM.
I know that my graphic card is not in the hardware compatibility list and I will replace them with an ATI V5900 which is on the list.
View 9 Replies
View Related
Oct 11, 2012
We have Inventor 2013 installed in our Cad Lab in our High School... when logged in as the administrative account that the program was installed under, content center opens and works fine, however when logged in as a student (any student, they have individual network accounts), when you click to access content center to insert something, nothing happens, no error messages, nothing. I have tried re-installing content center under a student account, giving the student account admin rites, changing paths to content center, giving the student full access to the entire C drive, nothing seems to work... Windows 7 SP1 32 bit environment.
View 4 Replies
View Related
Jun 20, 2013
I've just downloaded AutoCAD 2014 Student Version, and I can't seem to make my status bar on the bottom work. It's pretty annoying, as I couldn't manage to find the solution yet, did the access path to it changed compared to previous versions?
It's just blank grey (where OSNAP, DUCS, and other fun stuff's icons should be).
View 5 Replies
View Related
Mar 14, 2013
I have tried to convert some drawings from 2013 student edition to 2011 edition but the DWG TrueView will not allow me to convert student editions. How to use drawings from 2013 edition on 2011.
View 1 Replies
View Related
Sep 25, 2013
I have imported a dwg witch was created by Revit. The problem is that it creates polyline vertex for curves. But i want a arc, or at least not so many segments.
on the image; on the left is what i got, on the right is what i want.
View 3 Replies
View Related
Dec 4, 2012
In AutoCAD 2010 I could just click between the grips and it would automatically add the vertex. Now in 2013 I have to hover over the spot between the grips. Is there a way to change that so the default on the center grip is set to add a vertex instead of stretch?
View 5 Replies
View Related
Oct 4, 2013
I don't suppose there exists a lisp or method other than PEDIT that would automatically delete vertices that are unnecessary. I have a set of plans that seem to have been drawn...interestingly.
A lot of polylines have these seemingly arbitrary vertices that break up longer straight lines.
Ideally I'd like something that would compare Vertex A, B and C, if they all share an X or a Y, remove Vertex B (assuming that A, B and C are sequential vertices on one Polyline) - perhaps with a way of adding an adjustable tolerance.
View 5 Replies
View Related
Mar 5, 2013
I'm having problem with this tool in maya 2012 it doesn't connect or do the red mark between 2 vertices but in maya 2013 it does the red mark between them but doesn't connect
View 1 Replies
View Related
Mar 5, 2013
I'm having problem with this tool in maya 2012 it doesn't connect or do the red mark between 2 vertices but in maya 2013 it does the red mark between them but doesn't connect
View 1 Replies
View Related
Feb 3, 2012
I created a number of 3D blocks to be inserted into a 3D model of a building. I created the blocks in a separate drawing first; i defined them locally, then, when i had them the way i wanted them, I used "wblock" to save all of these blocks to a folder.
I then opened the 3D building model and tried to insert one of my new blocks. I repeatedly get the following:
"AutoCAD Application has stopped working"
with the following info from microsoft:
"Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: acad.exe
Application Version: 24.1.208.0
Application Timestamp: 4dbf9c16
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17651
Fault Module Timestamp: 4e21213c
Exception e053534f
Exception Offset: 000000000000cacd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033"
I have tried repairing my installation of autocad with no improvement.
i tried opening the drawing of the block itself, copying it, and pasting it via the "copybase" command into the other drawing with the same result.
Occasionally, autocad will ask me if i'd like to debug the program (and visual studio opens) -- it mentions a "StackOverflowException" within acad.exe, and also mentioned "windowsbase.dll".
I am using windows 7 pro x64 and autocad 2011.
CPU: intel i7
Graphics: NVidia GeForce GTS 250
8GB DDR3 ram
The autocad error-reporting dialog never gets launched as it is forced to close before this point.
View 3 Replies
View Related
Sep 16, 2011
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
View 1 Replies
View Related
Jun 7, 2013
Is there a way to create a vertex inbetween 2 vertex evenly? Just like the divide command in a spline?
View 2 Replies
View Related
Jan 10, 2014
How can i insert a JPG that will print?
I'm using the Insert > Reference > Attach command but the image in the JPG does not print.
View 3 Replies
View Related
Aug 22, 2013
Is it possible to insert a scale bar? I have searched all over but the only instruction I got was to click insert scale bar in the annotation pallette, but no such thing exists. Surely this should be easy enough?
View 9 Replies
View Related
Jan 21, 2013
This is in Acad 2013. This wasn't happening last week, and I don't know what changed. I have a small drawing file with a few point blocks with attributes and some lines I'm trying to insert into a main drawing. I've made sure that both files are set to "unitless" in the following variables:
INSUNITS = 0
INSUNITSDEFSOURCE = 0
INSUNITSDEFTARGET = 0
I've run SCALELISTEDIT on both files and reset them to "metric and imperial scales", and saved both files. The base points in both drawings are 0,0,0. Both files are in the WCS.
I've run audit on both files. I've run purge in the main drawing to make sure it doesn't already contain a definition of the small drawing. I've rebooted the PC and restarted acad.
When I insert the small drawing into the main drawing, the points come in at the correct coordinates. But the lines connecting them and the point block attributes are scaled up by 39.3700787400 and are far away.
View 2 Replies
View Related
Dec 11, 2013
Im wondering if there is a fast and atuomated way to insert a title block onto the layout tab throughout an existing project?
View 1 Replies
View Related
Apr 24, 2013
sometimes i like to insert image into a Dwg. In 2012 i use to drag and drop the image from the source folder to autocad screen then i had the insert instructions, scale, position etc.
But i can't drag and drop images anymore in 2013, i have to use _imageattach icon to open the open manager then select an image.
Is there a way to reactivate the drag and drop feature in 2013 ? Must be a Variable to autorise that.
View 4 Replies
View Related
Nov 15, 2013
It inserts the first block and then quits. I had to change the the file to a txt to get it to upload
View 6 Replies
View Related
Dec 3, 2012
I was inserting blocks. I was trying to insert more than one block at the same time. If I have to insert each block every single time, that's just so slow. There must be another way to make it easier to bring up more than one block at the same time.
I am using both Mac version and windows version of AutoCAD. In the mac version, when tried to open up block editor, for some reason, it says the BLOCKEDITOR = 0 (read only). I couldn't even get into block editor to make changes for my block.
View 3 Replies
View Related
Feb 20, 2013
I recently changed jobs and my employer did not purchase AutoCAD 2013 Civil 3D instead they only purchased AutoCAD 2013 (plain). I have to work with aerial and I recived all of our county areals which are on a state plain coordinate system. However when I bring the aerials into AutoCAD 2013 via the "ImageAttach" command the aerals come in at 0,0 and just pile up on each other and they are not to the correct scale. I could just move the aerials and try to rescale them and attach them at the corners but the areals are overlapped so this chore is not very acurate lining them up. I said all this to ask..........Is there a way to insert aerials (tif files) into AutoCAD 2013 (plain edition) so that they come in in the correct coordinate location and the correct scale? I know in AutoCAD Civil 3D you could go to the Map module and insert the aerials and they would come in in the right geodetic location. And incase you need to know, the directory I have the aerials stored in has the "tif" , "aux", and the "tfw" files.
View 5 Replies
View Related
Sep 9, 2013
I know I can create text and use "Insert Field" to have the filename automatically update in the title block. Is there a way to do the same thing with layout names when there are multiple layouts in one drawing file?
View 2 Replies
View Related
Jun 27, 2012
I'm having an issue with block selection menu not coming up- specifically when inserting a new block. When I click the icon, the menu flickers but then disappers. If I click anywhere on my screen, I get a error noise as if the menu is open and I have to press esc to be able to function CAD again. The same error happens when I want to print when I click "edit page setup" nothing shows up, yet I get the error noise as if it is up but nothing is there. All of this worked at one time, but when I was trying to create a new block, somehow I must have turned something off.
View 4 Replies
View Related
