AutoCAD Inventor :: Revolve Sketch On Non-connecting Axis
Jan 12, 2012
i a'm using Inventor routed 2011 and am having a issue with a revolve. I created an axis with a sketch in the part. Than i created a plane that does not pass through that axis. i sketch on that plane than try to revolve using the axis. it gives me an error. what i have is a arm3+"w x 28"l that is pivoting in the in the center and about 9" from the end it tapers out .5". The bottom is the cutting edge that i need to revolve onto a weldment for matching to keep a tight seal.
View 8 Replies
ADVERTISEMENT
Aug 25, 2010
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
View 9 Replies
View Related
Jan 8, 2013
As a background....I am coming off of 10+ years using Catia (that's the software the company used) and have moved to a company that uses Inventor instead. I have used inventor for the past year.
In the past (Catia) it seemed pretty intuitive to create the vertical and horizontal during the creation of the sketch in such a way that would reflect the way you would want it defined as a view in a drawing. As well as controlling the preferred screen view (vertical +’ve to the top of the screen and horizontal +’ve to the right of the screen)
As per a previous post....I have tried the "Edit Coordinate System" but find it difficult to control the Vertical and Horizontal axis independent of each other.......
I understand that "functionally" there is no issue...but it becomes quite disorienting in a complex model when going to edit a sketch and the model spins around, showing the sketch in an orientation that doesn't relate to the models features, or "sketch related" features.
It becomes especially difficult/confusing when modifying/checking other peoples models as well.
I just wanted to support the need for this functionality. In the end it just enhances the flexibility of the software and maintain some amount of definable company standard work procedures for modelling.
Maybe it hasn't been included in the software because of proprietary reasons? I would hope there is a reason.....it seems like there are people out there who would utilize it.
View 2 Replies
View Related
Feb 2, 2012
How does Inventor decide how to orient the axis for a new sketch? Sometimes, when I create a sketch on a face of a feature, the sketch sometimes rotates to an odd angle (Untitled.png). I can create a sketch on a different, parallel surface and the sketch doesn't go to odd angles. Why does Inventor do this?
How do I edit the orientation? I've attached the part that I'm having the issue in. When I try to create a sketch on the face of the loft, the x/y does things I don't understand.
View 1 Replies
View Related
Jun 13, 2012
how to lock sketch features onto an axis or any other reference point. Also, how to bring in reference features (like in ProE)
I am trying to extrude a figure off of one that has already been sketched, and the wrong lines keep moving when I change the dimensions.
View 3 Replies
View Related
Oct 4, 2011
I have this assembly shown in the pic. below. I'm trying to create a point or axis in the blue corner points (to attaches something later on) but it just won't let me choose it for some reason. I know that it's possible to to do that (almost sure I already done this trivial thing in inventor.)
Any reason it's not letting me choose the sketch points/line to in order to create points or axis(s)?
Inventor 2012 Pro.
I7 workstation
View 8 Replies
View Related
Jul 12, 2013
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies
View Related
Dec 3, 2011
I am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane. I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis, Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior? To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
View 2 Replies
View Related
Nov 6, 2012
I am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies
View Related
Sep 14, 2013
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
View 6 Replies
View Related
Mar 25, 2013
i try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies
View Related
Mar 19, 2013
Why does the revolve cut not work.I need to cut this section off
Also how do i remove the extra solid in the throat
Inventor 2013
View 9 Replies
View Related
Jul 17, 2012
Is it possible to do revolve cut in sheetmetal feature? If yes, any procedure with examples.
View 4 Replies
View Related
May 16, 2012
I am attempting to revolve a sketch between two surfaces in Autodesk Inventor Professional 2012. The problem is that the extrusion is being created on the opposite side of the two surfaces that I want.
For example, I have two flanges on a cylinder. I would like the feature to be created to stretch on the lower side, the larger angle, where the sketch is. Instead, it is creating the feature on the upper side, the smaller angle.
I have adjusted everything I can within the revolve feature options, including unchecking "minimum solution" and switching the starting and terminating faces.
In the attached file I am attempting to revolve "Sketch 7" about the x-axis, between the two flanges closest to the "top." The sketch is centered on where I want the revolved feature to be created.
View 2 Replies
View Related
Nov 16, 2013
Inventor isn't letting me use the revolve tool. I got the work axis and the sketch. I attached my part here and I also attached the file that tells how the revolve should look like .
View 2 Replies
View Related
Nov 7, 2012
I am new to inventor. How to model an oloid in inventor?I can't get it to work using the revolve tool.
View 7 Replies
View Related
Dec 20, 2012
I am really struggling in trying to revolve around cylindrical body on a specified angle. I understand the degrees of rotation angle, but i am looking to revolve or extrude a certain shape for the length of the shaft. Like trying to make a coil or a set of threads.
I have tried to use sweep but sweep doesn't work with two sweep lines.
View 4 Replies
View Related
Sep 21, 2011
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Dec 3, 2013
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
View 2 Replies
View Related
Aug 1, 2011
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
View 9 Replies
View Related
Dec 14, 2012
want to change sketch 2013 into the sketch of 2010
View 1 Replies
View Related
May 30, 2013
When I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
View 8 Replies
View Related
Aug 22, 2012
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies
View Related
Mar 4, 2012
what is the difference between a sketch and a planar sketch?
View 2 Replies
View Related
Jan 18, 2012
I have two sets of identical spur gears. I want them to be lined and connected big-small-big-small gear. But how to connect this two sets together. I can create motion and axes constrains but it still lacks teath meshing. I found some tutorial how to create differential drive, it works with downloaded gears but not with one that I create (it says to set imates to visible which does nothing and alt-move mesh imates toghether which also do not work). I work with 2009 and 2011 versions.
View 1 Replies
View Related
Oct 11, 2013
I am working on my project at home and I am having some problems with the fillet tool.
Attached is a picture of my problem with what it is doing.
I am trying to fillet A to E and E to C (B to D and D to F also)
On the left hand side when I fillet, it connects C to E instead of A to C and I do not know why it is doing that or what I am doing wrong.
View 2 Replies
View Related
Nov 28, 2012
I am trying to create & connect a Sketchedsymbol to a balloon. I was able to create the sketched symbol but, i was not able to connect to balloon.
The code is as below
Public Sub AddBalloonAnnotation()
Dim oGetPoint As New clsGetPoint ' custom class object
Dim oClick As Point2d
Dim DrawDoc As DrawingDocument
Dim oActiveSheet As Sheet
[Code] .......
View 2 Replies
View Related
Oct 3, 2012
As i discovered, frame generator is a very handy tool to make a frame, and to connect beams to each other.
For a customer we need to build a large frame, The outer beams are connected directly to each other. The beams inside the outer frame need to have a gap because of mounting and welding.
What i am looking for is a kind of tool, where i can add a notch, and after the notch, shorten the beam with 1 mm at each side to make a gap, which is needed for welding.
Inventor gives an error if i add first a notch followed by a Lengthen/Shorten command. How to add a notch and a gap of 1 mm to a connecting beam?
View 2 Replies
View Related
Aug 16, 2012
I'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies
View Related
Feb 6, 2012
I'm using Inventor 2010 and I have a problem with connecting the sheet metal corners to each other when making round radius flanges. How to connect the corners to each other (even though this is probably not possible in reality). Even better would be if the flat pattern of the sheet metal part would also look proper.
Note that the short edges are 90 deg bent and longer edges are 75 and 105 deg bent. This also makes creating "corner fill" parts a bit tricky.
View 2 Replies
View Related
