AutoCAD Inventor :: Why Revolve Cut Not Work
Mar 19, 2013Why does the revolve cut not work.I need to cut this section off
Also how do i remove the extra solid in the throat
Inventor 2013
ADVERTISEMENT
AutoCAD Inventor :: Sheetmetal - Revolve Cut
Jul 17, 2012Is it possible to do revolve cut in sheetmetal feature? If yes, any procedure with examples.
View 4 Replies View RelatedAutoCAD Inventor :: Revolve Between Surfaces
May 16, 2012I am attempting to revolve a sketch between two surfaces in Autodesk Inventor Professional 2012. The problem is that the extrusion is being created on the opposite side of the two surfaces that I want.
For example, I have two flanges on a cylinder. I would like the feature to be created to stretch on the lower side, the larger angle, where the sketch is. Instead, it is creating the feature on the upper side, the smaller angle.
I have adjusted everything I can within the revolve feature options, including unchecking "minimum solution" and switching the starting and terminating faces.
In the attached file I am attempting to revolve "Sketch 7" about the x-axis, between the two flanges closest to the "top." The sketch is centered on where I want the revolved feature to be created.
AutoCAD Inventor :: Unable To Use Revolve Tool
Nov 16, 2013Inventor isn't letting me use the revolve tool. I got the work axis and the sketch. I attached my part here and I also attached the file that tells how the revolve should look like .
View 2 Replies View RelatedAutoCAD Inventor :: Revolve Sketch On Non-connecting Axis
Jan 12, 2012i a'm using Inventor routed 2011 and am having a issue with a revolve. I created an axis with a sketch in the part. Than i created a plane that does not pass through that axis. i sketch on that plane than try to revolve using the axis. it gives me an error. what i have is a arm3+"w x 28"l that is pivoting in the in the center and about 9" from the end it tapers out .5". The bottom is the cutting edge that i need to revolve onto a weldment for matching to keep a tight seal.
View 8 Replies View RelatedAutoCAD Inventor :: How To Model Oloid Using Revolve Tool
Nov 7, 2012I am new to inventor. How to model an oloid in inventor?I can't get it to work using the revolve tool.
View 7 Replies View RelatedAutoCAD Inventor :: Extrude / Revolve On Given Angle Around Cylindrical Body
Dec 20, 2012I am really struggling in trying to revolve around cylindrical body on a specified angle. I understand the degrees of rotation angle, but i am looking to revolve or extrude a certain shape for the length of the shaft. Like trying to make a coil or a set of threads.
I have tried to use sweep but sweep doesn't work with two sweep lines.
AutoCAD Inventor :: How To Revolve A Shape Around The Shape Of Window (oval)
Feb 19, 2012i am trying to draw an aircraft and after drawing the windows, i got stuck. i am trying to revolve a shape around the shape of the window (oval) but it won't recognise that shape as an axis. i can't click it. is there a solution to this?
here is a screenshot for extra info!
AutoCAD Inventor :: Create Work Axis Where Work Plane Intersects Curved Surface?
Sep 9, 2013I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
AutoCad 3D :: Unable To Revolve 12 Selected Objects
Oct 27, 2011Im building a speaker, and i have the 2d drawing rady, i want to use the "revolve" command to finist it, but the porgram tells me this: Unable to revolve 12 selected objects.
View 3 Replies View RelatedAutoCad 3D :: Unable To Revolve Selected Item?
Dec 14, 2013revolving a 2d polyline into a 3d solid. Every time I apply the revolve command and select the 2d polyline and pick my axis points (start and end) it states that "unable to revolve selected object". I have no problem if I want to extrude the same object but have no response with the revolve command except that statement, "unable to revolve selected object"
View 9 Replies View RelatedAutoCAD 2010 :: Unable To Revolve Selected Object?
Oct 4, 2012i am drawing a chamfered-counterbored cylinder... i meet the problem: unable to revolve the selected object ! After i convert the object i drawng to closed Polyline path with the Pedit command, it cant be revolve !
View 1 Replies View RelatedIllustrator :: Using Gradients On 3D Revolve Shapes
Dec 30, 2013I am new to Illustrator and am trying to create a 3D dish that looks silver on one side and gold on the other. Is there a way I can do this? If I want to add further shapes to the top of this dish is it better to add these before applying the 3D effect? If so is it possible to apply the gradients to only part of the shape?
Alternatively would it be possible to use the gradient mesh in concave shape. The default mesh is convex. Is there an easy way to change this to concave?
Illustrator :: Scaling 3D Revolve Object
Aug 9, 2012I am working in 5.5 and have a 3D revolved globe object with a map art applied. It is currently in A2 art board size and I need to increase to A0. When I scale the object I get "The combination of artwork size and resolution exceeds the maximum that can be rasterized." I have tried adjusting the rasterize setting and the map art.
View 5 Replies View RelatedIllustrator :: Mapping Symbol As Art On 3D Revolve
Aug 19, 2012Basically I am trying to map a world map vector (symbol) onto a 3d revolve half circle in Illustrator. The problem I am having is that the quality of the map vector is significantly reduced when mapped on the 3d revolve. Is there any way I can have it keep it's "full" vector quality or is there something else I am missing.
3D Revolve Vector: [URL] ....
Actual Vector: [URL] ....
So why the loss in quality and how can I prevent this?
Illustrator :: 3D Revolve Is Smoothing Vectors
Mar 20, 2014Got a problem trying to wrap a vector illustration of a map around a sphere to create a globe for a logo (as per this tutorial: [URL] ....) except I don't want to make it look 3d with the shading options.
Basically when I do this, the map loses all it's detail almost as if Illustrator simplifies the map. I can't seem to work out at all how to make this while retaining the detail and export it as an eps.
Illustrator :: Rotate Object Made Using 3D Revolve?
Dec 19, 2013I have a group of 3D objects using the revolve command (object on the left). Now I want to put the object on it's side. i.e. rotate it by 90 degrees exactly as it is but the 3D revolve is distorting it to look like the object on the right. How do I prevent this?
View 9 Replies View RelatedIllustrator SDK :: How To Apply 3D Revolve Effect Using PlayActionEvent
Nov 16, 2011I am trying to apply 3D Revolve effect using PlayActionEvent. Since effects are not recordable, I added it using "Insert Menu Item..." and saved .aia file, which contained 3 params (itnm, lcnm and cmid). These params were enough to invoke 3D Revolve Options Dialog using SDK, but nothing more. Two questions:
Is it possible to suppress Options dialog? I used kDialogOff, but without effect. I suppose that dialog showed because I haven't specified any additional parameter (like x, y, z rotation, angle, surface, etc), which leads to second questionHow to find out list of params that are necessary for particular effect?
Generally, is it possible at all to apply Effects using PlayActionEvent?
Illustrator :: Mapping Artwork To 3D Revolve Object?
May 1, 2013I have created a 3d object to look like a coffee mate carton. I tried to post images on here but I keep getting an error.The art work that I want to put on my object consists of a number of elements which have been saved as a symbol. (image) However whenever I try to map it to my object nothing happens. I have used some of the system symbols and these work fine. I have also made a simple label of text only and this works fine. Is there a problem using more complex symbols in this way?
View 3 Replies View RelatedIllustrator :: How To Correct Perspective In Revolve Effect Options
Jul 21, 2012Here is cylinder made of rectangle using 3d Revolve effect.I want to change perspective of this cylinder like the red lines show, but it goes a bit to the left. I need exactly to the front. I think this is because perspective based on the center of rectangle (in the green circle) not on the center of cylinder. Is it possible to move the center of rectangle? If not, is any other decisions how to make what I want?
View 8 Replies View RelatedIllustrator :: CS5 Keeps Freezing / When Try To Render Artwork Using 3D Revolve Effect
Dec 9, 2012I am designing my band's album cover and it features pill capsules. I can create the object with ease, but when I click on "3D Revolve" and then hit "preview" it says "Rendering Artwork" and instantly freezes at halfway. how I want to get this done asap. I have tried the Alt+Ctrl+Shift trick that I have heard of, but that doesn't work either.
View 1 Replies View RelatedAutoCAD Inventor :: Default DXF Does Not Work?
Feb 9, 2012There is a bug in inventor 2012, where the default dxf version does not apply. It's not a huge issue, but it's quite annoying. Basically, when saving a dxf, I need to change the dxf version each time, regardless of what the default version is (which I've set to 2004). In order to import the files into my cam software (for CNC), it needs to be the Autocad 2004 DXF, so every time I need to save a dxf, I need to go to options and press finish.
View 1 Replies View RelatedAutoCAD Inventor :: Add-In Button Does Not Work And No Design Tab?
Jun 18, 2013I have came across a couple that require you to use the design tab but I do not have a design tab. I then try and use the add ins button to intall it but when i click on it, nothing happens.
View 9 Replies View RelatedAutoCAD Inventor :: Work Planes Angles
May 15, 2013In a part file is it possible to find the adaptive workplanes used to create extrusion1. And then find if the two workplanes are at an angle with respect to the origin planes.
Have been looking for a while but it seems hard to find information on workplanes
AutoCAD Inventor :: Design Accelerators Do Not Work
Dec 1, 2011I just installed Inventor Professional 2012 64-bit. The issue I'm having is that none of the buttons in the "Design" tab of an Assembly are working. None of the Design Accelerators ie Spur Gear etc. Pressing the buttons results in absolutely no reaction by the computer.
View 4 Replies View RelatedAutoCAD Inventor :: How To Delete A Work Surface
Aug 1, 2013How to delete a work surface. These work surfaces were imported from an iges file which contains thousands of work surfaces. They are not associated with a part feature which can be deleted. I've developed a routine to sort through these and identify unwanted work surfaces based on their positions. The best I've been able to come up with is to make them invisible, but I'd really like to delete them completely to clean up the file. I did try to loop through and delete any surface body objects associated with the work surface but that failed.
View 8 Replies View RelatedAutoCAD Inventor :: Work Plane Visibility
Mar 30, 2012when in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies View RelatedAutoCAD Inventor :: Cannot Project Any Work Planes
Sep 6, 2013Isn't this an important part of sketches? Why would I not be able to project a work plane.
Cannot project any w-planes whether default or created in inv2013.
AutoCAD Inventor :: Unable To Get 3D Grips To Work
Sep 10, 2008I am unable to get the 3d grips to work.They are turned on in the part settings,but they do not show up in the the menu when i RMB.
View 5 Replies View RelatedAutoCAD Inventor :: Unable To Set The Work Path
Jul 12, 2012I recall being able to set the work path in Inventor LT 2012. As you can see, I was able to set the work path previously, but not anymore.
View 1 Replies View RelatedAutoCAD Inventor :: How Vector Components Work
May 25, 2010I am trying to understand how fixed constraint works using Vector Components. It shows inches input, not ft/lbs. What I am seeing is if I put down 1 in in the Y insert and it shows the X and Z are unconstrained. What I am trying to is put on a fixed constraint to one direction which is Y. When I use 1 in for Y, it looks like it is using force of some kind. How this Vector Components work?
View 2 Replies View Related