how to lock sketch features onto an axis or any other reference point. Also, how to bring in reference features (like in ProE)
I am trying to extrude a figure off of one that has already been sketched, and the wrong lines keep moving when I change the dimensions.
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedI'm rigging a shoulder pad to a biped and I'd like it to only rotate on one axis. Google hasn't been that useful, and I hope I don't need scripting for this kind of minor thing. I'm rather new to 3Ds Max Design but I'm learning fast and liking it so far!
I've attached what I want to effectively accomplish. I'm looking for a way to lock the z-axis of the object with the upper arm's z-axis.
EDIT: Reduced picture size.
As a background....I am coming off of 10+ years using Catia (that's the software the company used) and have moved to a company that uses Inventor instead. I have used inventor for the past year.
In the past (Catia) it seemed pretty intuitive to create the vertical and horizontal during the creation of the sketch in such a way that would reflect the way you would want it defined as a view in a drawing. As well as controlling the preferred screen view (vertical +’ve to the top of the screen and horizontal +’ve to the right of the screen)
As per a previous post....I have tried the "Edit Coordinate System" but find it difficult to control the Vertical and Horizontal axis independent of each other.......
I understand that "functionally" there is no issue...but it becomes quite disorienting in a complex model when going to edit a sketch and the model spins around, showing the sketch in an orientation that doesn't relate to the models features, or "sketch related" features.
It becomes especially difficult/confusing when modifying/checking other peoples models as well.
I just wanted to support the need for this functionality. In the end it just enhances the flexibility of the software and maintain some amount of definable company standard work procedures for modelling.
Maybe it hasn't been included in the software because of proprietary reasons? I would hope there is a reason.....it seems like there are people out there who would utilize it.
How does Inventor decide how to orient the axis for a new sketch? Sometimes, when I create a sketch on a face of a feature, the sketch sometimes rotates to an odd angle (Untitled.png). I can create a sketch on a different, parallel surface and the sketch doesn't go to odd angles. Why does Inventor do this?
How do I edit the orientation? I've attached the part that I'm having the issue in. When I try to create a sketch on the face of the loft, the x/y does things I don't understand.
I have this assembly shown in the pic. below. I'm trying to create a point or axis in the blue corner points (to attaches something later on) but it just won't let me choose it for some reason. I know that it's possible to to do that (almost sure I already done this trivial thing in inventor.)
Any reason it's not letting me choose the sketch points/line to in order to create points or axis(s)?
Inventor 2012 Pro.
I7 workstation
i a'm using Inventor routed 2011 and am having a issue with a revolve. I created an axis with a sketch in the part. Than i created a plane that does not pass through that axis. i sketch on that plane than try to revolve using the axis. it gives me an error. what i have is a arm3+"w x 28"l that is pivoting in the in the center and about 9" from the end it tapers out .5". The bottom is the cutting edge that i need to revolve onto a weldment for matching to keep a tight seal.
View 8 Replies View RelatedI am having an issue with the "select sketch features" selection filter. Specifically, it does not seem to work within the edit-in-place environment. If I am sketching on a part that has been opened discretely, selection functions normally. However, if I am editing within an assembly and I attempt to work in a sketch, face selection takes priority over selecting dimensions or sketch features despite the sketch features filter being active. I have not always had this problem, and it began approximately a month ago. I can't think of anything I might have changed to cause this, but I'm wondering if there's an option somewhere that I accidentally toggled.
Inventor 2014 SP1
Windows 7
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies View RelatedI am creating a part that consists of a series of intermediate Lofts. The various Loft termination profiles are sketched on a series of stacked planes, most of which are parallel to one another. I have a Work Axis (oriented at an angle off of true vertical) that penetrates all of these sketch planes, essentially forming a "central axis" for my part. Most, but not all, of my sketch planes are normal (perpendicular) to that axis.
I want to use my "central axis" as a reference point in each of my sketches, i.e., the point where the axis intersects the sketch plane. I am having a minor difficulty.
When I project my central axis into a sketch whose plane is normal (perpendicular) to the axis, Inventor displays a reference point where the axis penetrates the plane and I can dimension my sketch geometry relative to that point. Conversely, no such point is displayed when I project the axis into a sketch plane that is NOT normal to the axis.
Is this correct behavior? To have a dimension able point on my "non-normal" sketch planes, must I create explicit Work Points to mark the intersection between my Axis and such planes, and then project those points into the related sketches?
I am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies View RelatedI just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
im using autocad 2008 but cant work out how to lock the x y or z axis, is there a simple way to do this?
previously i have used google sketchup and all you have to do in that program is press the arrow keys lol
I've created a mech robot and now I want to create a rig for it. But the problem is, that none of the joints are 'ball and socket joints'. So the joints can only rotate in one dimension, like a typical mechanical joint. My first solution was simply locking two out of three rotation axis for the bones and this works fine for FK animation. For IK animation however, it doesn't work. The locks are simply ignored.Is there any way to lock a rotation axis for an IK bone system?
View 5 Replies View Relatedi try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies View RelatedI've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedI'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies View RelatedIs there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedHow to lock between 2 parts in Inventor as it in Solid works logo like keylock? So it will move together.
View 8 Replies View Relatedwhen I am trying to enter information into any given pop-up window. As I am entering information into the text field, the window will lock out. It behaves as if the mouse has been clicked outside of the Inventor window. It appears to occur once per minute or so (with no activity on my part). The window just requires that I click on it with the mouse again.
View 2 Replies View RelatedI want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
I am creating a large assembly that will contain many level of details. When I complete a "section" of components, I create a LOD for just that section (all other components suppressed). However, all the components I add after that LOD has been created are added to that LOD. I would like all additional components to be automatically suppressed, unless I have that LOD active.
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate