I was working on my .idw and my autodesk inventor 2012 fatal errored on me. Well when I re-opened the program and drawing all my work was gone. Does inventor have a back up file like autocad. I know autocad had 2 back up files (.sv$ and .bak). Does inventor have anything like that?
View 2 RepliesIf I were to work on a file and proceed to close it and then re-open it with the intent of undoing or recovering information, is there anyway to do this?
It may be useful for me and others to know if there is a way round in case this does happen.
Recovering a gimp file that got corrupted. My computer crashed at the wrong moment of time. It only saved 1 layer and nothing else.
View 1 Replies View RelatedI am building a page for a web site. when i have created a button, with a rollover effect and then save it, i have trouble recovering the button. the button is saved with all different files containing the different slices. how do i go to the saved file and get it back to the original button that i created.
View 1 Replies View RelatedIllustrator crashed in the middle of working on a file. Looked around for a recovered file on the desktop. Nothing. Can't seem to find any option to set my Preferences for auto-save.
View 1 Replies View RelatedIn the attached file there are two custom iProperties that cannot be perminantly updated nor deleted. The iProperties are "size" and "purch_qty". These iProperties were created and set using a custom macro but they are of course accessable via the standard iProperties dialog. I can change the values for these particular iProperties but as soon as I save the file they revert back to their original values. Same goes for trying to delete them. All other iProperties, custom and otherwise, seem to behave normally.
The sketch in this file originated with a 2D DXF file for a vendor supplied aluminum extrusion quite a few years back. The original file has been copied (save-as...) to about 20 different files over the years. The iProperties in question were added years after most of the files were created, Each file is exibiting the same problem. These files are used in a LOT of assemblies. The thought of recreating all these files from scratch and updating the assemblies is not very inviting.
No other IPT files seem to be having this issue.
Inventor 2012 SP-1
Acad 2012 SP-1
Vault 2012 Update 1 Hotfix DL18480860
Windows 7 Pro 64-bit SP-1
Quad core Xeon 2.26GHz 12 GB
Quadro 4000, 7936 Mb, driver 8.17.12.6570 (265.70), Dual Monitors
SpacePilot Pro, driver 3.3.107.0
I was at work today and opened a Ps document that someone else had created. I don't know what I did (I'm a relatively new Ps user) and I don't even know how I ended up saving it. The document is floor plans overlaid on a site plan with logos, text. etc. (so, it's too complicated for my limited time and knowledge to be able to re-import the source document and re-format the entire thing). When I first opened the document, all the floor plans looked normal, but now, one no longer has a white background. The black outlines of the rooms are still there, but there's nothing underneath (I see the gray and white checkerboard background between the black outlines). I need to know how to make that area white again. It seems to me like maybe I deleted a layer... maybe... I don't know...? I can't just use the fill tool to fill white into the background space because (a) the entire shape is not closed, so applying a fill to one area fills the entire document and (b) I know that's not the right way to do it... I'm trying to get it back to the way it's supposed to be, not just make it look right because other people from work might still use the electronic file.
View 2 Replies View RelatedWhen I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
How do I change a project file back to a normal .mov file so that I can play it on my iPad or send it to a freind. I have taken out all the bits that I dont want and woukd like to be able to play it as a normal file and not in "Photoshop"
View 1 Replies View RelatedMy drawing just dissappeared while I was still working on it and when I try to recover the drawing file shows a blank page, I'm using an AutoCad 2013
View 3 Replies View RelatedSo I spent 4 days working on a profile last week. And this morning I opened it up and accidentally erased the alignment, saved and closed the drawing (I must have thought it was in another drawing, and I wasn't paying attention).
Now the profile is gone and I'm wondering if I can open up a drawing that was saved before I did this mix up. I checked my autosave path, but the path doesn't exist. So I don't know where it's be autosaving to.
I have in this moment a drawing displaying a layout with 2 Viewports. One of the them has only the View Cube even that the Navigation Bar under the User interface is checked out -greyout anyways as you can see in the Word Document-
In the other viewport, even that the it is active, I do not have neither the View Cube or the Navigation Bar. How is possible to recover these tools and display them in the active Viewport in the Layout that I am currently on.
I am attaching a Word Document that shows better the problem that I am having now.
I use auto cad 2010.In my computer .dwg file is deleted but .bak is in my computer but when i rename the .bak file to .dwg file but it not open in auto cad 2010.
View 5 Replies View RelatedNearly all our drawings are done in model space with a black screen and my "Drawing Window colors|2D model space" dialogue box shows that scheme.
I have just opened a file done by one of our (recently no longer employed by us) draghtsmen and it has a grey background and when I go to the dialogue box it shows as 3D parallel projection.
I have modified the colours of the 3D parallel projection to give me what I want but I would prefer to know how to get the file back to 2D model space. The fact this guy managed it on one file suggest that there may be others lurking. How did he do it in the first place. Most of his drawings are displaying how I want them to.
I can not run purge or recover on the attached drawing file or it will crash autocad. When I run audit it says no errors are found. I don't have access to older versions of ACAD to test this on and the file is dated back in 2008 but not sure which version of ACAD it was created in.
This is the only copy of the file. I've opened it and added some linework and saved it as a newer drawing only to have the same results. The attached file is the unaltered version. I have one other file that I'm having the same issue with as well.
Our server went done and our IT people are trying to recover lost cad files.
We have tried in AutoCAD the recover command with no success.
How we can recover these files or recommend a software to recover these files?
When I am browsing to open drawings for some reson the back button doesn't work with the ACA2011 file browser. The mouse button works fine with all other applications so am I correct to assume something is wrong with the ACA file browser?
View 2 Replies View RelatedIs there any command to send to back all images in a DWG file, like it is HATCHTOBACK for hatches?
View 3 Replies View RelatedMEP 2013
Can you export an OLE object from a DWG back to an Excel file/document?
Needed to purge items in a drawing to recover a drawing in order to repair corruption within it it. I purged and audited the drawing in question and then created a block or the drawing elements which I imported to a new drawing sheet. That's great, all is well but.....obviously (now) the only layers, dimscale,etc. items I normally use in my template sheet are gone and only the items remaining after the purge are the ones that were in my original drawing.
How can I, or can I replace my normal full layer list, dim settings, blocks, etc?
I seem to have lost my menu bar, and can't figure out how to get it back. I know how restore standard toolbars, but the menu bar is not in that option.
View 4 Replies View RelatedI back-up a 23 GB library to two external hard drives about once a week. I always wipe out the previous back up set and copy and paste fresh each time and let it run.
Ive also been thinking of adding an online backup (carbonite etc) as another failsafe.
How do automatic back-ups work in the realm of parametrically linked files such as Inventor. Im a little worried about that concept.
I am trying to create a cut in the back of this chair, I don't know how to make a cut with multiple angles. I attached the back part, all i need to do is figure out the cut in!
View 1 Replies View RelatedI accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
As I've said I am new to photoshop although the interface and commands are quite familiar once wroked with the video editing programs.I have satrted work on a logo which has 3layers.I have saved the project(as .psd)and when I have re opened the project all 3layers now appear as 1!!!thus I cannot edit them seperately.
Can anyone tell me if there is a way of getting the 3layers as before? If there isnt a way can anyone advice for next time how to save the project?
Is it possible to set up a project in inventor that when you save it locally it will also c to the 360 cloud location?Or must you set up a project with save paths directly to local 360 partition? Then syncing is done automatically from there?
View 1 Replies View RelatedI have changed my settings in all of my templates to metric. I create a new assembly, add the part (yes, it is set to metric), I now create my first new part in the assembly. When I start to sketch it changes back to inch. How do I set it so it stays metric? This is Autodesk Inventor Professional 2012.
View 6 Replies View RelatedI have a strange problem in Inventor 2013:The back button has gone missing in some ribbon menus.. This Is a bug or a setting thats been changed?
View 5 Replies View RelatedIn working with Autodesk Inventor I accidentally exited out the menu that displays all my different extrusions and sketches. what this menu is called and how I get it back?
View 2 Replies View RelatedI would like to animate the model so that it moves like a whip antenna.
I would like to show the spring flexing back and forth with everything above the spring moving side to side as spring moves.
I have tried several ways to do this but have not had any luck. I haven't done a lot of animation.
I have attached the assembly and parts.
It doesn't have to perfect it's for a presentation.
IV2012 Product Design Suite
Windows XP Professional 32 Bit
I've lost some Photoshop cs 8.0 files and have been told by a recovery company that they can't be saved. I've attached a screen shot of icons that appear to show what seems to remain of one of the files. You will see it has 3 different icons that correspond to it. One a 'thumbnail'; one a 'meta' and one an 'exec' file.
View 15 Replies View Related