is it possible to ray-trace and output to file instead of render in Inventor Studio? I ask because realistic visualisation with ray tracing active gives me better results than render. It might be I am using the wrong settings, but I don't know.
View 8 Replieshow to use Live Trace in Illustrator but now instead of the Tracing Options window having a button that says "Trace" it's now showing a button that says "Set to Default." I'm sure something isn't selected right or something similar, but I can't figure it out. why "Trace" is no longer an option?
View 2 Replies View RelatedImage trace shifts artwork once the trace is finished. Have to nudge art back into place each time.
View 6 Replies View RelatedI'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?how to make the equivelant of Comic Art in Image Trace's new settings?This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
Left: CS5 - Comic Art setting.
Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.
I just started using CS6, jumping from CS3. A major tool I use is Live Trace, and I have custom settings for that. I cannot find a way to make Image Trace behave the way Live Trace did for black and white line drawings. The results I get in CS6 are far inferior to those I got in CS3 in terms of retaining the look of the original raster image. Otherwise, I will have to leave CS3 installed just to do my Live Trace.
Here is a sample of what I mean. You can see the quality degredation in CS6 compared to CS3. (And it's much more obvious when it's full size and full resolution.)
My settings used in Live Trace (CS3) were:
The settings I tried in CS6 that gave the above result were:
I have recently buy one software ( embroidery) , with the corel draw x5 essential.
- but I can not find the trace function to convert bitmap to vector , like power trace.
I am playing with traces in dynamic simulation and in the output grapher i get values for position like:
P
P(x)
P(y)
P(z)
and in the graph i get some values of the position but i am unsure on where the datum is at this point. I would of thought that the datum would be where the trace is attached? Where the datum is based and is it possible to set a relative datum to when the trace is set?
I am using Invertor Dynamic Simulation and I need to know the 2D contact position data to be displayed in the output grapher (i.e. the x,y,z coordinates). Only the forces are computed in the output grapher. I’ve tried using the “trace” feature but this will not allow me trace the 2D contact point. It would even benefit me to know the angle of the normal force relative to the absolute frame.
View 2 Replies View RelatedAny program that allows you to trace a parameter or dimension throughout the entire data set, showing what files it's used in and maybe even gives a family tree of embeds?
Same for tracing ipt and iam files in the entire data set.
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies View RelatedIs it possible to set up a render farm for 3DS MAX if you have the Autodesk Product Design Suite?
View 9 Replies View RelatedI opened a .JT files without issues, it shows the model as it suppose to do and also without errors. When I try render it, it disappears. The same happens when exporting to STEP.
And it is also not possible to make a section view. I have the feeling that is has to do with the fact that JT files are use for visualization. Something with nodes? Is there a way to convert the JT file that it acts as a normal Inventor file?
I have a simplistic model (4 parts, 10 or so screws) that I am trying to render an animation through using Studio with the lowest possible output settings, my concern is that the render time is extraordinary long even for the most basic of assembly, why is this ? I have also tried the animate when in an IPN file which does improve render time but the quality is not very good.
I will now try using keyframe animation in Showcase to see if I can get an animation with good quality completed within the hour !
Currently when ever I render an image using Inventor 2013 the reflection shows a parking lot. It doesnt seem like it matters what type of material I choose or the color that I choose. I have found some older fixes that date back to 2008 but nothing for 2013.This link is the only thing that I can find and as I said it is for 2008.
[URL]
We went in to the registry and tried following the steps but some of the working is different and didnt want to mess things up.
I'm looking to use Inventor Studio to render a model, using an image sphere (e.g. Stuttgart Courtyard) as the background.
I cannot find the installed location for these images, so even if it is the active view, Inventor will not allow me to render it, and I cannot manually select the file as my image sphere.
Also, are additional such image spheres available for download?
Inventor 2013
Win 7 Pro SP1 (x64)
I can see this brick pattern bump map in my working viewport but when I render an image, it doesn't show up.
View 1 Replies View RelatedThe parts in my assembly all use the same appearance. When I come to to do a render of my model however it is rendering one of these shiny (I think thats what it called).
See attached images
Image1 shows how I want it to look (this is the opposite end of my assembly)
Image2 shows the problem
Image3 shows a different appearance give to the problem part
The problem part is derived from the other end of the assembly (the part show in image1). All the parts at this end of the assembly are created the same way. They all render fine its just this one. I have tried recreating the part but still end up with the same result.
is it possible to render an animation in realistic view with Raytracing switched on?
In the view i have a realistic view, but when i do "render animation" the pictures are rendered without Raytrace.
I have got troubles with textures in the new Inventor 2013. When I try to programmatically change a texture in a render style of a part (no matter, whether I use an existing render style or create a new one), when I set the texture file name, Inventor throws an exception "Bad argument". In Inventor 2012, it worked. How textures should be set in the new Inventor?
Sample
PartDocument partDoc = ... some initialization
RenderStyle newRenderStyle = partDoc.RenderStyles.Add("newRenderStyle");
newRenderStyle.TextureFilename = newTexFilename; //this throws an exception bad format, even if the texture is in the Inventor textures directory
partDoc.ActiveRenderStyle = newRenderStyle;
I am trying to render animations and I am still getting the "Undo file size exceeded" message in the middle of my animation. I have tried every option I could find to get it to stop but it keeps happening. Some of the animations take over an hour and I don't want to sit in front of the computer waiting to click ok to increase the file size.
I've maxed out the size in the settings at 4096K but it still gives me the message at 2048 and 3072.
How do I change the a part material render style within an assembly?
I have tried this below. It changes the name but doesn't update the render style.
Sub Material()Dim oassy As AssemblyDocumentSet oassy = ThisApplication.ActiveDocumentDim ocompdef As AssemblyComponentDefinitionSet ocompdef = oassy.ComponentDefinitionDim ooccurr As ComponentOccurrencesSet ooccurr = ocompdef.OccurrencesDim opartdef As ComponentDefinitionSet opartdef = ooccurr.Item(11).Definitionopartdef.Material.RenderStyle.Name = "Red"End Sub
I have an interesting question here - How should I try to shaded render this syringe so that a plunger can be seen underneath the translucent body? I need to have the gradiations and labels of the millileters be plainly black.
OR
is there a way to keep those gradations black while rendering an illustration and have the plunger visible beneath the body?
The gradiations are cut into the body of the syringe in this model, and the surfaces of the gradiations are changed to black.
Have been adjusting the color styles - but perhaps I'm missing something. Making the material translucent just fades the gradiations on the syringe, I'd like.
I cannot find any way to switch off the auto-hide for the Render Image menu in Inventor Studio 2013. I know how to do it for other menus, and Bobvdd posted a registry hack a couple years ago for 2011. I cannot find anything for this dialog, and I would really like it to stop.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
I keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies View RelatedThe same scene, same settings, produce 2 very different outputs in max 2011 and 2012, render to texture for normals is currently useless in max 2012.
The blue one is a correct tangent normal map created from a sphere in max 2011, the colored one is the the one created inside max 2012 from the same objects and settings, and the last is another sample of normals generated in max 2012.
Each time I want to have batch render with 4 camera views. I thought it would provide me with elements along with it. But it just brings me only one file as I set .png.
I know it works with State Set by changing camera view. But Batch render should work too.
I can´t believe it. Save 50% Rendertime. Fix the Render Elements Bug with Render Optimizer V3! deactivate "contrast all Buffers" with RO V3, and you have the same speed as Vray Renderelements.2014 can comming! URL....
View 3 Replies View RelatedOkey, so I want to render a normal map directly from render production. Pretty much like the Viewport Filter "Normal map" in Mudbox. Can this be done? And I also want to make clear that I do not want to use "render to texture". I dont want to do any projection against an other mesh, I want to do it directly to the camera.
View 2 Replies View RelatedYesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
and I can fin nothing about this error anywhere on line.
Is it possible to render an object to fit exactly into the render window. i.e If I have a plane object segmented into 512 * 512 segments and I randomly colour each polygon. If I render at 512*512 pixels, I would like to fit the plane exactly so that the rendered image shows 1 pixel per polygon.
Whilst you can select region to render its not that exact and is based on the visual window. can it be utilized with render blowup.
Basically I want to render a square object exactly ( no borders) at a large resolution, hence the need for render blowup so that I can render into smaller tiles.
Is there a way to import image files and then trace them so you have a .dwg file? I am using autocad LT 2012.
View 2 Replies View Related