AutoCAD Inventor :: F6 Home View Button Not Working?
Jan 29, 2013
I've checked everywhere else for a solution but none apply to me it seems. My keyboard shortcut for returning to the home isometric view (F6) is not working. F3, F4, & F5 all work fine. I've tried returning the cursor focus back to the model window and that doesn't work. I also made sure the shortcut is actually listed in the Customize menu, I even reset all to default in case something was changed.
View 9 Replies
ADVERTISEMENT
Feb 5, 2011
i can't find where to tell inventor to not switch back to the home view after finish a sketch edit. sometimes it is handy but often it is nice to see the part update after doing some sketch editing rather then the home view spinning the part away. i think we are capable of hitting F6 ourself if we wanted that view.
i have found that inventor 2011 will always do this when you are looking square onto the sketch and then finish the sketch . am i right to say that this is only a 2011 thing? i cannot recall previously this happened. i am finding that i am always finishing my sketch and having to hit F5 after inventor swings away to home view.
View 9 Replies
View Related
Aug 23, 2012
I'm trying to retrieve a Camera Object for the "Home View", without setting the view to Home.
I use the "UserInteractionDisabled=true" in a addin to make sure the user doesn't mess with the inventor while my addin is doing some time consuming work.
When documents are open in this mode, the view is set to front. The only way I have found to get the camera for Home View, is to use the GoHome method on the ActiveView, but this is slow since it is running an animation...
Roughly im doing the following:
Inventor.UserInterfaceManager.UserInteractionDisabled = true;Document invDoc = Inventor.Documents.Open("c:\somefile.ipt");View v = invDoc.Views[1];v.GoHome(); //would like to not do this, it is animatingCamera cam = v.Camera;//cam.ViewOrientationType = ViewOrientationTypeEnum.kDefaultViewOrientation; //<- this will fail.. Point eye = cam.Eye; Vector up = cam.UpVector.AsVector();Point target = cam.Target;
Is it possible to get the Camera object for Home with "going" home?
View 4 Replies
View Related
Nov 21, 2012
I'd like to locate the PROPERTIES button in the Home Panel instead of, or in addition to, the View Panel. When I go into CUI, it won't let me move/copy it.
View 1 Replies
View Related
Nov 23, 2011
When I select "Start Simulation" from the Add-Ins tab, nothing happens. The hourglass comes up for a split second, but nothing launches. We have Simulation 2012 Mechanical installed on the machines. I have tried with both parts & assemblies. Obviously we can launch both applications separately but it's nice to go back and forth using the quick launch.
The machines are both Windows 7 Pro (latest service packs) as well as Inventor & Simulation 2012 (Product Design Suite Premium to be exact.) Inventor has the latest service pack SP1 installed. This did work in previous versions of Inventor.
View 1 Replies
View Related
Apr 22, 2013
I sometimes create parts while working in an assembly. This hasn't been an issue but something mysterious happened. Once I create my new part, to get back to the assembly ( turn off the transparency)
I typically press the Return button which is normally in the first tab (this example shows I created a sheet metal part)but for some reason the return button is now in the inspect Tab??I tried looking through the customize ribbon form and can't seem to put the button back into the first tab?
View 8 Replies
View Related
Jun 22, 2011
I have a users machine that is displaying some odd behaviour. Their Macros and VBA Editor buttons have stopped working. We have tried several things already but nothing appears to have any effect.
View 9 Replies
View Related
Jul 13, 2013
Under the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies
View Related
Feb 15, 2013
There is some association between prints and view representations i am missing.My typical process is:
-Build a model
-Create a representation
-Lock the representation
-Create a print from that representation
-Create a new representation and continue to work on the model
When i go back to the original print there is parts flying everywhere (see attached picture - hope you get a kick out of it)
View 2 Replies
View Related
Aug 2, 2013
I have been designing a school project for the last 2 months using the student version of inventor 2014. The realistic views have been working the whole time before but now it is not working. I click on it, and it just switches back to shaded view. If I click on shadows, or reflections I get the following message.
"One or more visual effects in use are not supported by the current system graphics hardware. We strongly recommend running the Diagnostics check in applications option for detailed information.Would you like to run hardware Diagnostics now?"
After selecting Yes I get the following,The graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Click the OK button to place diagnostic information on the clipboard.
I hit OK and everything closes. This is left on my clipboard.
This graphics driver is fully certified.
Graphics Hardware Description: OpenGL Microsoft Corporation GDI Generic
Graphics driver file vga.dll is version 6.1.7600.16385
Using the GDI-Generic driver
The display is using 32-bit color
Inventor Version:
Build: 170, Release: 2014 RTM - Date: Thu 02/28/2013
64-Bit Edition - 8192.00 GB
Loaded Inventor Add-Ins:
Assembly Bonus Tools
Simulation: Dynamic Simulation
Simulation: Frame Analysis
iCopy
System Information:
Operating System: Windows 7 Enterprise 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Apple Inc.
System Model: MacBookPro10,1
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (8 CPUs), ~2.6GHz
System Memory: 16384MB RAM
Page File: 1787MB used, 30791MB available
DirectX Version: DirectX 11
DxDiag Version: 6.01.7600.16385
Inventor Hardware Library Information:
HW Library Version = $Revision: #1 $
HW Library Date = $DateTime: 2013/01/15 11:05:45 $
Windows 7
Original driver information:
Graphics HW Vendor Supported for Autodesk Inventor: False
rating 0, optimization level 3
Optimization Level = 0
Options = 0
Warning Options = 0
[code]....
View 6 Replies
View Related
Jan 18, 2013
I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies
View Related
Jun 10, 2011
I WOULD like to use viewcube. However the button in the view panel has a blue rectangle over the button. I've tried to enter "navvcube" in the command line with no success. I've gone through the help pages in 2011, again with no sucess. Does the blue cover mean it's not available?
View 3 Replies
View Related
Mar 7, 2012
the problem begun when i reset my Cad-2010 profile. I have checked my Keyboard, My Keyboard is fine but i there is any changed has been made in option setting which is cuse of my problem.
View 2 Replies
View Related
Nov 3, 2012
I haven't been able to use the 3D orbiting shortcut since yesterday. I'm using a wireless Microsoft Mouse and keyboard instead of the inbuilt mouse & keyboard on my laptop (which don't seem to be executing the command either).
Up until yesterday I never had any problems orbiting the view.
View 5 Replies
View Related
Feb 10, 2011
When I am browsing to open drawings for some reson the back button doesn't work with the ACA2011 file browser. The mouse button works fine with all other applications so am I correct to assume something is wrong with the ACA file browser?
View 2 Replies
View Related
Oct 28, 2010
I have a Logitech MX 600 cordless mouse. I just updated the SetPoint software as I got a new cordless keyboard. Now, the middle button pan is erratically working. None of the settings has changed. MBUTTONPAN is set to 1. Middle button is still set to "Middle Button."
Sometimes the pan works. Most of the time it doesn't. If there are new setting on the SetPoint software I need to check or uncheck? I've even tried messing with some CUI settings under the mouse component...
View 5 Replies
View Related
Jul 29, 2013
I have various Button macros with the user input select in them, but in 2014 they dont seem to be working anymore.
they worked in 2013.
It just says invalid selection.
example
^C^CSelect;change;p;lt;phantom;;
View 6 Replies
View Related
Dec 28, 2013
I'm using LR 5 Develop Module and I make a few adjustmnets and then click on the next photo and then click the "Previous" button but nothing happens. It did work the frist time I tried it and then occasionally it works, but most of the time it does nothing. Very frustrating as this is supposed to be a time-saver.the last photo I clicked on has chnages applied...then I click on next photo and click "previous."
I unistalled and reinstalled LR5 too....no change
View 2 Replies
View Related
Jan 21, 2014
I'm using the Filmconvert plugin and the reset buttons do not work. I have the latest version of CC and Filmconvert plugin.
Filmconvert support said that "The functionality of the reset buttons is provided by the application API... plugin developers do not code that functionality and have no visibility or control over it... which is why it must be a Premiere problem. Have you asked Adobe tech support for assistance?".
I've tried reinstalling Filmconvert plugin and also resetting preferences.
Is it a bug?How do I contact Adobe for support? They don't reply to bug reports.
View 4 Replies
View Related
Mar 7, 2014
my publish button is not pressable so i go to file>publish options once im there i choose a folder on my desktop to export it to but it never shows up... (also i can only press on the "save" button doesnt give me the option to publish.. do you have to save it somewhere special? IM TRYING TO CREAT AN OAM FILE FOR ADOBE MUSE... i can save it to my desktop but then it just apears to be html.. what am i doing wrong????
View 1 Replies
View Related
Jan 29, 2013
i try to load CFX setups in smoke 2013 but the little triangle near load button is not working........how i can choose replace for loading setups in CFX ?
View 4 Replies
View Related
May 9, 2013
I am doing a trial of Revit 2014. Usually I get the student version, but I enjoy 30 days with no stamp. I want to do some night renders, and so I dropped in studio lights that aren't showing up at all in the "sun and artifical" render.
I go to adjust the lights with the "Artificial Lights" button and nothing. No response at all. It's like a fake button that just looks like it's being clicked.
View 1 Replies
View Related
Feb 13, 2014
I had this installed on another computer prior to it being stolen, got a new laptop and installed on it. I am running windows 7. When at the welcome screen i click on Edit and the little bar changes and acts like it is going to start but then does nothing, it just takes me back to the welcome screen. I did find one thread on here and tried those recommendations by holding down the ctrl, alt, and shift while clicking edit and then choosing yes but that didn't work.
View 1 Replies
View Related
Jul 25, 2013
My Logitech Performance MX mouse's left and right scroll does not work in PS CS6. It moves the slide bar, but the image does not follow. it just sits there. I have the latest updates for the SitePoint software. I am running Windows 8 and CS6 64 bit.
View 2 Replies
View Related
Feb 9, 2013
I used to use the 'back' button all the time in my old windows version of PSE organiser. I have now bought PSE 11 for my new macbook and finding that all the reasons I wanted to use PSE organiser rather than iPhoto are fast evaporating with this version. One of them is the 'back' button. If I scroll down down down a long way and find a particular photo and then deliberately or even accidentally, change the view to see data (that incidentally I used to be able to see in the same view on the info side pane such as folder location ....) then I lose my place in the media display and cant get back there like I used to. and have to hunt for the photo again. Similarly when I select a tag to display the selection containing that tag and then want to return to the previous main media display I return to the top, rather than wherever I had progressed to. This didn't happen in my old windows version. I cant understand why the developers would think it was a great idea to remove this facility, but I cant find it. It was invaluable when I was going back through the catalogue to old photos and adding tags or other info.
View 1 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Jun 27, 2012
I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 4 Replies
View Related
Sep 23, 2013
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
View 3 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Oct 31, 2013
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies
View Related