When I try to open a .ipt file that is posted here in Inventor 2013, I get an error.
I have tried on several different files and it will not open them. I dont have any problem opening my own files, just the ones that other users have posted here.
to open two or more files in autocad 2014
becomes very slow to use?
zooming is slow?
why this happens?
Can I open 2012 .dwg files in 2013 and have all the settings styles and all the 3D data? 2013 Civil 3D
View 3 Replies View RelatedI have just upgraded to AutoCAD 2013. Now I have one AutoCAD 2013 and five copies of AutoCAD LT 2009. A strange problem started ovccuring after starting using of AutoCAD 2013. Quite a lot of files done with LT 2009 are not opening in AutoCAD 2013. When you tru to open this file, nothing happens and a blank new drawing is opened by AutoCAD 2013.
I have DWG TrueView from release 2010 to 2012. These files opened perfectly well in 2010 & 2012. So I downloded DWG TrueView 2013 and installed it to check whter my AutoCAD 2013 installation was faulty. These files do not open in DWG TrueView 2013 also.
I tried exporting the file to DXF in LT 2009 and then tried to open the DXF file in 2013. It gave a message that it could not read the file. The odd fact is that it is not happening with every file done in LT 2009. Some open and some do not.
In my opinion, this seems to be a serious bug in 2013. Any body else experinecing this? I am unable to attach any file as all the files are larger than 2 MB even after zipped and I cannot upload such a big file here.
I received files in 2010 format which I converted to 2007 using true view.Now when I open in 2013 I get a message "file needs recovery" I recover and save. when I open again I get the same message in 2013.
View 3 Replies View RelatedI have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies View RelatedI have a data set including .shx .shp .prj and .dbf files each named the same for landuse, rail, road, etc for a single city. How can I open these files to export a simple line drawing for use in a thesis project as a map.
View 4 Replies View RelatedBefore I installed the Product Design Suite, Network License. I did a Clean Uninstall of all Autodesk software: Uninstalled Programs, Deleted remaining Autodesk Folders, Cleared the Registry of all things Autodesk, cleared the Windows Temp folder, and Even ran Windows Install Clean Up Program. Clean slate, start the install, type in my three redundant license server names, the suite installs without a hitch.
I reboot. I opened AutoCad Mechanical, and AutoCAd with not issues. However Inventor, Showcase, Sketchbook, 3ds Max, and Fusion will not load/open, all is the blue spinning wheel. Check the Task Manager and see the program in processes, nothing happens. Then I right click on the image, and I will get a window stating program not responding.
I checked my Environmental Variables and the ADSKFLEX_LICENSE_FLEX and FLEXLM_TIMEOUT are set correctly.
I do understand why my Autocad and Mechanical are the only software that functions out of the suite. I have done a complete uninstall and re-install and the issue still exists. Only AutoCAD will Open and function. Intentor will not open.
Machine description:
Dell Precision T3500
Intel Xeon W3530 @ 2.80 Ghz
12 gb RAM
ATI FirePro V5800
Win 7 Enterprise 64 bit
Luckely 2014 works with service pack 1. Now i have another problem:
on school they have 2013, and i have 2014. But I tried to open a part made in a 2014 version. I think this program is expensive enough that they won't make different part versions .
i can open parts made on 2013
When I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies View RelatedI'm using Maya 2013 SP2 on a MacBook Pro running 19.8.2. When trying to load 32-bit floating point OpenEXR or Tiff files for displacement maps I will invariably get the following error:
// Warning: Failed to open texture file: <file path>
The proper OpenEXRLoader and tiffFloatReader bundles are loaded in the Plug-in Manager and the very same files open without issue on Maya 2013 on my Win7 machine. It seems this is OSX specific.
I am using an educational version of inventor 2013 and I have been making part drawings and saving them as .dwg. I have tried to view these files using edrawings at school and it says there is a error in viewing the files. I have also sent the files to several friends that have various programs for viewing dwg files and none of them are able to open the files. I can open them perfectly fine from my computer using dwg truview. I have also tried saving them as different file types such as .dxf but these wont open either.
View 1 Replies View RelatedI am having difficulties opening some files today. They are files that I normally work with everyday. They are an stp. file and jt. file. See attachments... These are hot items I need to be working on so the sooner the better.
When I do this, inventor keeps closing unexpectedly as well.
If Inventor can open files with the extension .cad? I have a customer who keeps sending me this type of file and I cannot view in Inventor.
View 1 Replies View RelatedI have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View RelatedHow do I open an 2014 assembly file to 2013
View 1 Replies View RelatedI have drawings (some with more than one sheet) from inventor 10. Now I like to open it in inventor 2013. The first sheet is showing, but I can't open the other sheets. I can print them, but I can see a listing of it or go to the sheet.
FYI, until December 2012 I worked in Inventor 10, now I have inventor 2013, so everything is new to me.
I am copying chunks of code from the My First Plugin tutorial and am using the code that opens Inventor to start the form. I have both Inventor 2012 and 2013 installed on my system. I have gone in to the properties and changed the .dll reference file to read out of the bin/PublicAssemblies folder in 2013, however, when I run my Windows Form, it will open Inventor 2012 instead.
View 2 Replies View RelatedI had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies View RelatedI don't understand why the right click - open drawing command had to be put in a submenu. Is there a way to customize the commands on these right click menus other than the marking menu? I don't really like the marking menu, and I don't want to put it there. There was nothing wrong with where it was... There are so many commands in the basic right click menu that a good majority of inventor users don't use. At least give us the ability to customize this.
View 9 Replies View RelatedI am using LR 4.1, also usis PS CS5.
Any user who uses Facebook to showcase image galleries knows that Facebook changes how images are displayed from time to time. One month it will be on a black background and the next on a white background. And then they put overlay's on top of your images and they change things around whenever they wish. There is not rock solid consistency from Facebook on how they display your images across devices or over time.
What I am trying to do is to add some consistency to how my images are displayed by adding my own border to my images.
Ideally, I would want Lightroom to add a border for me based on some setting under the export manager. But as far I know there is no setting to do this? (Why doesn't lightroom have any border options anywhere yet for anything it exports? This would be relatively simple I think.)
Here is the only way I know how to solve my issue.
First, my other considerations: I want to keep my original images in my catalog in tact and as is w/o a border and with layers if it is a .psd file. I do NOT want to destructively add a border to the catalog images, only the images that end up on Facebook. I also want to add my watermark image to the final image so that it is done as the last step so that the bottom part of my watermark shows my web site address over the white border on the bottom of the image. Using a droplet and the watermark in the same step does not work properly because it applies the watermark before it runs the action, not after.
I have created an action to add a x pixel white border by: Merging (flatten) all layersCreating a new unlocked background "image" layerExpanding the canvas by x pixels.Creating a new white filled layer and moving it to the bottom of the layer's pallet.Adding a 2 pixel black inside stroke to my image layer and adding a drop shadow. I created a droplet from this action and put it in the droplet folder for LR.
Now for the repeated steps that I am going through...
Select the images that I want to write to Facebook.Export these images to a new folder using the droplet.Import the folder of all of these images back into Lightroom.Move the new images with borders on them into the correct LR FB publish service.Publish the photos using the sharpening and watermark settings.Delete the .psd files created in Step #2.
The steps that I would like to avoid are #2, #3, #6
I would like to have the date taken readily visible when i scroll through my library. At one point I could see a timeline on the side that was very useful. I would like that again or have the date visible on each thumbnail at all times. How do i set this?
View 2 Replies View RelatedWe receive models through ftp. Something happened, and I am no longer able to open these files. (See attachments). We switched over to a server over the weekend, and Monday I was not able to open the stp or jt files. Inventor is installed on my PC only, so I am not sure if that could make a difference or not. I uninstalled and then installed it and the problem still exists.
View 6 Replies View RelatedI have accidentally click "No" and "Do not show message again" at the start up. Thereafter, I am not able to open any inventor files. How do I get back the start up prompt?
View 8 Replies View RelatedI have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
We have Inventor 2013 installed in our Cad Lab in our High School... when logged in as the administrative account that the program was installed under, content center opens and works fine, however when logged in as a student (any student, they have individual network accounts), when you click to access content center to insert something, nothing happens, no error messages, nothing. I have tried re-installing content center under a student account, giving the student account admin rites, changing paths to content center, giving the student full access to the entire C drive, nothing seems to work... Windows 7 SP1 32 bit environment.
View 4 Replies View RelatedI have always used step files to save back to previous releases but i cant seem to get them to open in 2012, I get the attached message
I cant see any version options when saving the sat or stp file, also dwg export, import doesnt work either
I can see other people are still able to do this, is there a setting somewhere?
I'm unable to open or otherwise query an Excel spreadsheet.
I get the following error message. see attached.
What steps must I take to open and query Excel spreadsheets?
I'm using Inventor 2013, Excel 2007 and Vista 64.
Inventor 2012
AutoCAD 2012
Product Design Suite Ultimate 2012, 2013 & 2014
2013 working on an existing part not made from 2013. Density needs to be corrected. Where is the material browser?
or
What happens to older part materials that were created by customer when you upgrade (or downgrade as it has been for our company) from 2011 to 2013.
I just re-installed windows and all the fine (PITA!) trimmings. Now, when I open a file (any type) for Inventor thru windows explorer it opens a NEW instance of Inventor everytime! This is a HUGE system hog, waste of time ect ect.
How can I correct this to just open in the instance that is already there?
Inventor 2014 PDS
I had a copy of Inventor 2013; It worked well up untilrecently. I moved some folders on my hard drive, and the program no longer could find the files. I went into options and changed the pathway for any prompt I saw had the former location. Next the part files I am working on are said to be missing. Something about the project location. I tried adding the files through managing the project found in options. Now Inventor says it is unable to open or even recognize the part files saved. How can I recover the files Attached are screenshots of the errors.
View 2 Replies View Related