I have access to a Map of a town. I would like to isolate a certain area of the town and make it bigger on the same page. But not let it link together, that way I can get some demensions in, delete some lines and texts which will not effect the overall map itself. I would just solely like to manipulate the blown up portion.
View 1 RepliesThe contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the text?
View 4 Replies View RelatedI'm trying to use diagnol fractions in my label text for 1/2 and 1/4 deltas. It displays and seems to work fine in Autocad, but when I plot, the numbers have trouble displaying themselves.
I'm using a light color from our .ctb, so I thought that was the problem, but that doesn't seem to be the case (I tried two heavier lineweights and it only got worse). Increasing the percentage size of the fraction also has no effect.
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View RelatedIn Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
I am having trouble trying to select certain lines in order to delete them.I am using AutoCAD 2009.
I am needing to import my map to a program to use.When I import the map the program is only showing the useable portion of the map in the top right corner because there are some invisible objects hidden at the edge of the .dwg file. When i hit cntrl+a, these show up but otherwise I can't select them. I would like to know how to make these items selectable so i can delete them.
I am running AutoCAD 2011 on Windows 7 via BootCamp. The Delete Key does not function to erase lines. I have set Pickfirst to 1 and ensured Noun/Verb is checked on. I have tried pressing just the Delete key and also FN Delete, which is the correct combination for Delete on the MacBook Pro keyboard.
View 1 Replies View RelatedI'm having trouble with the "extend" function on AutoCAD 2012 (windows). Randomly, the "extend" function will delete the lines I select. I sometimes will have to undo and re-input "extend" three to four times for it work properly.
View 2 Replies View RelatedI'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.
View 3 Replies View RelatedIs there any utilities that can select the entire drawing with the 2d polyline and erase all the polyline less than specify length (eg:10m,20m etc) ?
View 4 Replies View Relatedi have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedCivil 3D 2013.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
I have problem when I open some dxf format from autocad.
For each line in autocad in coreldraw I have about 10 lines. How to clean drawing?
I created 2x levels earlier in the project, but now need to delete them. For some reason there not selectable which means I can’t highlight nor nor delete them.
View 1 Replies View RelatedAfter drawing a rectangle with the rectangle tool. how do I delete one or more of the four sides/lines?
View 1 Replies View RelatedI have some Symbolic Lines in a Revit Family, any time I go to "delete" any of them the file goes into "Regenerating" mode and will not come out out of it without hitting "Cancel". If go to move or copy a "Void" I have created in the files it does the same thing.
View 1 Replies View RelatedI've playing around trying to write a macro that with the click of one button will remove all my guidelines, not hide them, delete them. I can't seem to make it work.
View 8 Replies View RelatedI know that I can use a clipping mask, but I prefer not to have the extra shape of a clipping mask. I've tried all of the Pathfinder commands and those don't work. The Shape Builder tool is tedious for this. An example is the circle with lines extending past the circle in the illustration below. Is there an easy way to delete just the portions of the lines that extend past the circle and leave those inside the circle?
View 13 Replies View RelatedI thought that finding the alignmentId, and using the
doc.GetAlignmentIds().Remove(delId);
would do it.
I know i have the right alignmentId, it all cheaks out, there must be something I have to do after removing from the ID collection.
I am doing a Tr.Commit(); but that does not seem to be good enough.
full code is: (_returnMsg is a local var for the class containing this method)
public void DelC3DHAlign(string name) { _returnMsg = "Error, No alignments available";
//access Civil 3D
CivilDocument doc = CivilApplication.ActiveDocument;
try { using (Transaction tr = HostApplicationServices.WorkingDatabase.TransactionManager.StartTransaction
[Code]....
[URL]....
On the layout page I have several viewports. 2 of my viewport borders are not visible. I can not pick them, property them, delete them, or manipulate them in any way. When I activate them as "model space" view, I can work in the model space but the border still does not become visible. I only know where the border is by the truncated drawing. Is there any way to correct this problem?
Before I get the usual "turn on your layer" responses: ALL of my layers are thawed, ALL of my layers are on. I am running Civil 3D LDD Companion but have had this "glitch" on previous versions. I seem to remember the only answer is delete layout and start a new layout from scratch. Tell me this is not so!!
I have text in a drawing that wont edit or delete. I have heard there was a text bug and to fix it set DTEXTED to 1. I have done that, closed out and came back in and the text is still there and will not delete or edit.
View 6 Replies View RelatedIs there a way to delete multiple VIP's in a profile? By windowing maybe? I have a profile with several hundred VIP's and I need to delete the VIP's between certain chainage but I'm not clear if this is possible. It will take hours to delete them one by one, although as far as I can ascertain this is the only way.
View 6 Replies View RelatedIs there a way to delete all the autocad base layers that come in with my template?
View 2 Replies View RelatedI have a feature line in my drawing. It is one of over 1000 breaklines in a surface. I want to delete it from the surface but keep it in the drawing. How do I do this?
In 2009 this was easy. I could erase the featue line then use the OOPS command to get it back in the drawing. Unlike the UNDO command, OOPS did not put it back in the surface definition. This was a wonderful feature/bug. In 2012 OOPS behaves the same as UNDO.
I found this post regarding finding a breakline in the surface definition but that is not realistic with 1000 breaklines.
Here are a few options I have tried:
Delete all breaklines from the surface and add the ones I want. (This is my best option so far.)Copy the featureline to the clipboard, erase it, then paste it back in. (Copying feature lines to the clipboard, or wblock, is very slow. The feature line should be moved back to the orignal site.)Explode the feature line into a 3D polyline and then convert back into a feature line. (Good option but does not work well for curves.)
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
I'm trying to clean up the drawing. I have erased everything, but there are still 20572 parcels somewhere in the drawing that I couldn't delete.
The file is too big to attach so use the link to download:
[URL].........
I am running AutoCAD Civil 3D 2010. I am a new user and just going through some tutorials and created a couple of survey databases for practice. The problem I am having is I can't figure out how to delete them. When I exit Civil 3D and restart it, those databases are still there under the survey tab in Toolspace even though I haven't even opened a drawing yet. Also, do I need MS Access installed on my workstation to run any functions within Civil 3D?
View 5 Replies View RelatedI graded a commercial site with mostly feature lines. I added points where I needed them to get everything to work. After modifying my surface, I suddenly have zero elevations randomly throughout my site. They don't make any sense why they appear. Some are just added to my drawing and others are existing points that were changed to zero. I can go to a back up drawing from a few hours ago and redo some grading, but I would like to know if there is a way to just erase zero elevations from the surface. I remember LDD was able to create surfaces ignoring elevations below a set elevation.
View 4 Replies View RelatedI am using Civil 3D Map 2009 and its showing many unwanted printers in the list when I try to print a Map. How can I delete printers from list.
View 6 Replies View RelatedOr maybe I have to delete it individually ? Is not an option to "delete alignment labels".
View 9 Replies View RelatedI have an .idw of an assembly. I originally made a sub assembly invisible in the .iam and create a new base view. The invisible assembly is not there as I would expect. If I turn the visisbility back on in the .iam the part is now visible in the .idw even thogh I have cleared the "Associtave" box. No matter what I do, I can't clear the assembly out of the .idw even if I go back to the .iam and make it invisible again. This used to work in previous releases.
Atuodesk Inverntor 2011