I have some Symbolic Lines in a Revit Family, any time I go to "delete" any of them the file goes into "Regenerating" mode and will not come out out of it without hitting "Cancel". If go to move or copy a "Void" I have created in the files it does the same thing.
View 1 RepliesI've selected Symbolic lines for a family. I draw them and after importing them into the model I notice they're model lines for some odd reason. But when I go into the family and select the model lines the Convert command is greyed out.. What is causing this?
View 1 Replies View RelatedI've developed several familes with modeled objects and symbolic lines.
When loaded into a project, I cannot snap to the symbolic lines. I have run into this problem before but never took the time to solve it.
Or can symolic lines not be used to snap to?
I have an extrusion with a profile consisting of two offset arcs. This results in a curved surface.
I want to show a line in 2.5" from the top, bottom, and start and end edges of the curve. What I've done to accomplish this is to create two reference planes, one 2.5" down from the top of the extrusion, and another 2.5" from the bottom.
For the vertical lines, I then have to create a reference plane that is a chord of the arc of the surface, where the plane intersects the outer surface 2.5" from the edge on each side.
I have some other items that are being drawn on this curved surface, and to be honest, that's a bit of a pain. Am I missing some easier way to accomplish this?
If this was a project file, all sorts of options, but I'm not finding any in the family editor.
I created 2x levels earlier in the project, but now need to delete them. For some reason there not selectable which means I can’t highlight nor nor delete them.
View 1 Replies View RelatedI'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
In Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
View 2 Replies View RelatedI've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
View 6 Replies View RelatedIs there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies View RelatedI downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
Im try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies View RelatedI would like to create family type with drop down list as shown in the image.
How it is created and for what?
Recently, My revit does not load families. The process I use is the following:
In the Build area of the home ribbon, I select the Component button. I going to the Place component ribbon. When I select Load Family form the Mode portion of the ribbon, the properties box pops up. It is locked at this point and I cannot do anything but hit escape. The program functions just fine in all other aspects. I have used a vanilla project to see if the project I am working on is corrupted and I get the same results.
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies View RelatedI'm trying to edit the keynote family with no luck. We are updating our standards and getting into using the keynote system in revit. I have added the correct keynote to most of our standard materials and its working great. I then opened the keynote family and changed the justification of the text to justify the way we do notes. I also changed the line style of the leader lines so it matches our other notes.
All went well. I get stuck when I try to change the gap between the leader tail and the text. I can't find anywhere to actually edit the line/arrow in the family that would let me change how that works. If you see my attached image the one on the top is our standard note and the other two are the keynote family.
How to set / change that gap?
I'm trying to create a frame and panel kitchen cabinet door family. It flexes correctly horizontally, but I can't get it to flex vertically. What do I need to correct?
View 2 Replies View RelatedIs it possible to create the Wall family in revit?
View 5 Replies View RelatedRemoving tag leader, I couldn’t know how to remove the leader of the tag from its family. How this might be done?
View 5 Replies View RelatedThis includes door opening/cased and opening-elliptical art. When I put them into my drawing they show up in the preview but do not insert into my drawing.
View 2 Replies View RelatedI know I must just be missing this somewhere, but I would like to shut off the geometry inside a family that's associated with a specific parameter. This is while I'm editing the family.
Specifically, the family I'm creating is for an appliance that has the option of an arched, or rectangular opening. Once I associate the geometry for the arched opening with a parameter, I'd like to shut that off, so that I can create the rectangular opening. Similar to how the family behaves once it's brought into a project.
Right now, I'm just kind of using the temporary hide functionality to shut them off, but if I turn them on, then have to go back to make edits, I have to select the individual geometry all over again to hide it. I've also noticed that some geometry, even when hidden, can still be selected.
As Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
Is it possible to add a rotation control to an annotation family like the ones in elevation tags?
View 2 Replies View RelatedThe line color of my family is not showing up. It is just a symbol and it should be red, but it shows up black. I went to the overides in the project and nothing was overridden, so I went ahead and changed the imported families override to red just to see if it would change and it still didn't change. How do I fix this? When I open the family, the lines are red, just not in the project.
View 1 Replies View RelatedI created one panel family. On plan view, I added two parameter for just width and lenght (Picture 1), but at the same time, I cannot added parameter for adjust the angle in the elevation plan(Picture 2) .
Attachment is my .rfa file
I'm having trouble editing a family I've made. It's a profiled rim for a crate that needs room for a latch. So I need to create a small spacing in the rim so that the latch can fit. I've tried to cut geometry, and edit the family (rim) itself, but I need to edit it in an elevation view and not floor plan.
View 1 Replies View RelatedI am creating a fireplace family in Revit Architecture 2012 with wall host (Speciality equipment with Wall host). I selected the template created the family, but in mean time i can't understand the wall is having delete option.(i.e it is released from host). I am surprised to see that in the family type, the wall host is missing.
View 1 Replies View RelatedIs there any option to show all the data of a family according to the attached jpg?
View 3 Replies View RelatedDoes Revit Architecture/M&E/Structures 2013 have a standard solar panel family?
View 3 Replies View RelatedI am trying to find a way to set a particular type in a family as default so that when the family is loaded, that type is what I am inserting.
View 3 Replies View RelatedI want to Create a Wall Nitch that will be in a tiled shower we are doing. Best way to create a family that cuts into a wall? I don't want to Create an opening, because I don't want it going all the way through the wall.
View 4 Replies View Related