I'm having trouble editing a family I've made. It's a profiled rim for a crate that needs room for a latch. So I need to create a small spacing in the rim so that the latch can fit. I've tried to cut geometry, and edit the family (rim) itself, but I need to edit it in an elevation view and not floor plan.
View 1 Replies
Revit 2013: Was playing around with sketching symbolic lines in a Generic Model family. I added a line and changed its LOD to be visible in fine only. Nevertheless, it was still visible in the family editor even when the view was set to coarse.
1) How can we verify visual behavior of a family while in the family editor if the objects visibility is not governed by LOD settings? (BTW: The family performs correctly when loaded in the project, just not in the family editor).
2) Is the fact that LOD is ignored in the family editor by design or a bug?
3) Is there any visual cue that tells us that a particular line will be not visible at a LOD?
4) Should we be duplicating Ref. Level views in the family to keep things straight?
Is there any option to show all the data of a family according to the attached jpg?
View 3 Replies View RelatedIs it possible by importing a drafting view or copying 2D details, to not duplicate the detail components families ? I tried many ways, but I always get my families duplicated.
Copying 'Gypsum' will always duplicate with 'Gypsum1', even if they are exacly the same original family.
I've been doing some family as an independent construction detail revit model, I think that is the most appropriate type of detail component. Graphically everything right but I encounter the following problem, all built to type text is not visible in the project then.
How do you control the display? or do you like I can put a text in a detail component family? and if not visible... why would have the option of make texts? Is the only option to annotate after in the project insertion?
I've created a Title Block Family and when I bring it into the project I want to be able to edit the text on the project without having to go into the Family and edit it from there, how do I do this?
View 2 Replies View RelatedI'm creating a window family by modifying a pre-existing one. One of the things I need to do is to move the reference planes defining the "left" and "right" edges of the window opening, so as to make to opening wider, but I'm not allowed to do it. The reference planes always move together, so that I'm stuck with a 3'-0" wide opening no matter what I do. I can't find any constraints linking the reference planes to each other or to a 3'-0" dimension - I can't find any constraints on them at all, in fact.
The file in question is attached. As I mentioned, the reference planes I'm concerned about are called "left" and "right". I have been able to move other reference planes in the file.
I am trying to take a custom counter I created as a family and have it show a material in my project. It seems that no matter how I apply the material parameter to the family type object, type or instanced, the material does not change in the project when I apply any new material. I have opened up other countertops I have used from the Revit Default Casework Family and I can't seem to find a difference in the setup between mine and Revit. I wanted to use an instanced parameter so I can change the material per room where the object is used.
View 5 Replies View RelatedI'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
I recently had a friend take many photos of my family. Not one of the photos came out with all of us smiling and looking at the camera at the same time. Any suggestions of how to incorporate some photos together to make one good one? I have Photosho Elements 6 and I am pretty new to photoshop.
View 2 Replies View Related am trying to edit Family table as per my requirement. In the family table editor, the columns for " Sectional area, Moment of Inertia, Section modulus etc...." are available. These kind of properties have to update manually or there is any option available to generate autmatically ?
Find the attached image for more clarity !!!
Inventor Professional Suite 2010
Windows 7
Just for kicks, make a lot of changes to a Content Center family table, and then accidentally hit the ESC key, thinking it will back you out of what you are typing.
But seriously, ESC while editing any field of a CC family table, EXITS the editor, losing anything you've typed in up to that point. URL....
After editing a value in the Family Table in the Content Center Editor I still get the old value. I tried to refresh this Content Center part (as administrator) but without succes.
In the logfile the error message is: "Failed: Unable to create part file. Unknown error."
Earlier (probably with older version of Inventor) I was able to refresh.
Is this a bug, or has this something to do with false settings
Autodesk Inventor Product Design Suite 2013 SP1.1
In Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
View 2 Replies View RelatedI've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
View 6 Replies View RelatedIs there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies View RelatedI downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
Im try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies View RelatedI would like to create family type with drop down list as shown in the image.
How it is created and for what?
Recently, My revit does not load families. The process I use is the following:
In the Build area of the home ribbon, I select the Component button. I going to the Place component ribbon. When I select Load Family form the Mode portion of the ribbon, the properties box pops up. It is locked at this point and I cannot do anything but hit escape. The program functions just fine in all other aspects. I have used a vanilla project to see if the project I am working on is corrupted and I get the same results.
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies View RelatedI'm trying to edit the keynote family with no luck. We are updating our standards and getting into using the keynote system in revit. I have added the correct keynote to most of our standard materials and its working great. I then opened the keynote family and changed the justification of the text to justify the way we do notes. I also changed the line style of the leader lines so it matches our other notes.
All went well. I get stuck when I try to change the gap between the leader tail and the text. I can't find anywhere to actually edit the line/arrow in the family that would let me change how that works. If you see my attached image the one on the top is our standard note and the other two are the keynote family.
How to set / change that gap?
I'm trying to create a frame and panel kitchen cabinet door family. It flexes correctly horizontally, but I can't get it to flex vertically. What do I need to correct?
View 2 Replies View RelatedIs it possible to create the Wall family in revit?
View 5 Replies View RelatedRemoving tag leader, I couldn’t know how to remove the leader of the tag from its family. How this might be done?
View 5 Replies View RelatedThis includes door opening/cased and opening-elliptical art. When I put them into my drawing they show up in the preview but do not insert into my drawing.
View 2 Replies View RelatedI know I must just be missing this somewhere, but I would like to shut off the geometry inside a family that's associated with a specific parameter. This is while I'm editing the family.
Specifically, the family I'm creating is for an appliance that has the option of an arched, or rectangular opening. Once I associate the geometry for the arched opening with a parameter, I'd like to shut that off, so that I can create the rectangular opening. Similar to how the family behaves once it's brought into a project.
Right now, I'm just kind of using the temporary hide functionality to shut them off, but if I turn them on, then have to go back to make edits, I have to select the individual geometry all over again to hide it. I've also noticed that some geometry, even when hidden, can still be selected.
As Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
I'd like to create a 3D view of an element to be able to use in different projects. The best logical way I can think of would be to create such element in a project just for that purpose, create 3D views with annotation and then somehow import only those 3D views to the project i'm working on...
I think it can't be done this way but it shows what I want to achieve.
What's the best way to reuse a 3D detail with annotations?
I'm trying to make a layoout on Revit. I have done sections and plans made on Revit and all is ok. But when I try to create a rectangular detail, such as in Plan, which contains a CAD file, I noticed that since the center of Revit is not aligned with the center of the dwg, the detail is moved and takes up a very large rectangle . When I try to drag the window "detail of Plan" within the table layout, the rectangle occupies the entire sheet.
View 2 Replies View Related
