I recently had a friend take many photos of my family. Not one of the photos came out with all of us smiling and looking at the camera at the same time. Any suggestions of how to incorporate some photos together to make one good one? I have Photosho Elements 6 and I am pretty new to photoshop.
View 2 RepliesI'm having trouble editing a family I've made. It's a profiled rim for a crate that needs room for a latch. So I need to create a small spacing in the rim so that the latch can fit. I've tried to cut geometry, and edit the family (rim) itself, but I need to edit it in an elevation view and not floor plan.
View 1 Replies View RelatedRevit 2013: Was playing around with sketching symbolic lines in a Generic Model family. I added a line and changed its LOD to be visible in fine only. Nevertheless, it was still visible in the family editor even when the view was set to coarse.
1) How can we verify visual behavior of a family while in the family editor if the objects visibility is not governed by LOD settings? (BTW: The family performs correctly when loaded in the project, just not in the family editor).
2) Is the fact that LOD is ignored in the family editor by design or a bug?
3) Is there any visual cue that tells us that a particular line will be not visible at a LOD?
4) Should we be duplicating Ref. Level views in the family to keep things straight?
am trying to edit Family table as per my requirement. In the family table editor, the columns for " Sectional area, Moment of Inertia, Section modulus etc...." are available. These kind of properties have to update manually or there is any option available to generate autmatically ?
Find the attached image for more clarity !!!
Inventor Professional Suite 2010
Windows 7
Just for kicks, make a lot of changes to a Content Center family table, and then accidentally hit the ESC key, thinking it will back you out of what you are typing.
But seriously, ESC while editing any field of a CC family table, EXITS the editor, losing anything you've typed in up to that point. URL....
I've created a Title Block Family and when I bring it into the project I want to be able to edit the text on the project without having to go into the Family and edit it from there, how do I do this?
View 2 Replies View RelatedI'm creating a window family by modifying a pre-existing one. One of the things I need to do is to move the reference planes defining the "left" and "right" edges of the window opening, so as to make to opening wider, but I'm not allowed to do it. The reference planes always move together, so that I'm stuck with a 3'-0" wide opening no matter what I do. I can't find any constraints linking the reference planes to each other or to a 3'-0" dimension - I can't find any constraints on them at all, in fact.
The file in question is attached. As I mentioned, the reference planes I'm concerned about are called "left" and "right". I have been able to move other reference planes in the file.
I am trying to take a custom counter I created as a family and have it show a material in my project. It seems that no matter how I apply the material parameter to the family type object, type or instanced, the material does not change in the project when I apply any new material. I have opened up other countertops I have used from the Revit Default Casework Family and I can't seem to find a difference in the setup between mine and Revit. I wanted to use an instanced parameter so I can change the material per room where the object is used.
View 5 Replies View RelatedAfter editing a value in the Family Table in the Content Center Editor I still get the old value. I tried to refresh this Content Center part (as administrator) but without succes.
In the logfile the error message is: "Failed: Unable to create part file. Unknown error."
Earlier (probably with older version of Inventor) I was able to refresh.
Is this a bug, or has this something to do with false settings
Autodesk Inventor Product Design Suite 2013 SP1.1
I use CS4 on the Mac. I'm looking for an efficient solution for digitizing family photo albums. I know how to scan and fix the scanned image, if necessary. I know how to organize photos in Adobe Bridge. What I'm clear on is how to create captions for the photos that will will be permanently linked to the photo files and can be output for on-screen or print albums / galleries.
Also, what is a good tool for creating output? InDesign is an obvious possibility for print; but I was wondering if there is some sort of plug-in or companion product for PS designed specifically for generating albums and slideshows.
Im using Corel Photo-Paint X5 and was wondering how to decrease or remove pixelation from the edges of a low quality photo? Iva attached a sample below
View 5 Replies View RelatedPutting aside the fact that you really can't see stars at sunset, and that if Polaris ever shows up near a setting sun, it's the End Of The World -- it's equally easy to add the stars to a nighttime photo..Next. Am trying to build a collection of photo-editing tips on the Xara-Users forum -- [removed link -link broken and or requires membership to view]
Xara's a LOT easier to use than Photoshop. But it is different. I know Xara's really for vector artwork, but when you end up using it more and more for photo editing, it's useful to have a bunch of techniques in one place.
After editing in perfect photo I cannot unstack the edited photo in LR4. The thumbnail shows the number of photos in the stack, but right click/expand stack has no effect. The edited photo is not showing.
View 2 Replies View Relatedis it possible to convert a photo into a silhouette in cd. I have been playing around with a few pictures but not getting great results, although they are improving each time. What I want to do is convert a picture of my neice into a silhouette and maybe cut it in vinyl.
View 6 Replies View RelatedDSCF3720-On top of South Mountain.jpg
This is the top of South Mountain. South "Mountain" is about 1,000 feet high. We like to think that we are living in the mountains so a good many hills and towns have the word mountain in their name.
I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
Computer hardware newbie here: I do a significant amount of photo editing work and for a very long time I've experienced Photoshop, Bridge and Photomatix crashing constantly (usually due to insufficient RAM) or just generally taking forever (Bridge took forever to load the thumbnail/preview extractions in a folder full of images, Photoshop took forever to save images and Photomatix took ages to load/merge a set of bracketed photos). Here are the typical error messages I'd get: [URL] ........
As a professional photographer, constantly running into that sort of thing is quite aggravating, so to hopefully avoid ever having to deal with that again I invested in a new custom built computer. It's Windows 7 Professional 64 bit with 32GB of RAM and a 240GB SSD; I'm using the 240GB SSD as my boot drive/OS, all of my programs are installed there, and the page file. My photos and data are stored on several HDDs. I have yet to install any of my photo editing software (Photoshop CS6 Extended, Lightroom, Photomatix etc) to the new computer yet.
My basic question is this: what is the best way to take advantage of the SSD (and the computer in general) when it comes to my photo editing software?
Specifically...
1. If I have a folder of photos I'm working on, should I move it to the SSD and then work on them from there in order to take advantage of the speed of the SSD? Would this make any difference in terms of speed if the photos are located on the SSD vs. an internal/external HDD?
2. Most of what I've read online seems to recommend two separate SSDs, one for installing/booting the apps and one for cache/scratch. Does it matter if I use my 240GB SSD for both?
3. This is a fairly new computer and the SSD is already almost half full (102GB used, 120GB free) *WITHOUT* any of my photo editing software installed yet. I'm concerned about how fast that remaining 120 GB may fill up. As it fills up will I lose the speed advantage of the SSD vs. a regular HDD?
4. Sort of similar to #3, but should I bother moving any of my other non-photo editing programs/caches off of the SSD to a HDD and would there be any major difference in the speed/lifespan of the SSD if I did so? It's mostly Firefox and Chrome and their caches that I'm concerned may be a problem if they remain on the SSD.
I am trying to take this photo which has some nicks in it and touch it up.
Specifically the areas in the bottom left where the floorboard, moldings join. As you can see it's pretty out of line. I don't have to get it perfect, but am trying to ensure it's not a noticeable glitch. I have about 5 of these I need to do, so any help as to if it's possible and how I can go about it would be great.
So far I've tried using the smudge tool, copying parts of the real and pasting it over it, however with the angle it's beyond my skill to do this.
Also the other glitch in the window trim on the right side...
I used to have a photo editing procedure in CS5 - VERY easy - make layer on top and it was editable. Somehow I'm missing a step on CS6.
Example:
applying smart filter. There isn't adjustment layer option for this so I'm left with doing it on the background layer which isn't what I want to do. How do you open up the layer?
what can be done to a photo that was taken in a partly cloudy day with the sun covered or against the sun so it looks more lively?
View 9 Replies View RelatedPhotoshop CS2 crashes when editing photo on Mac OS 10.6.8. What is the problem? I worked fine before.
View 1 Replies View RelatedThis is a picture made with the Instacollage app. I wanted to add two additional pictures. How can I make the boarders of the 2 additional photos (the 2 which are down) fit perfectly or almost perfectly with the rest.Untitled-1.psd
View 3 Replies View RelatedI have a photo where the orientation is landscape and I would like to make it a 5x7 portrait size orientation. Is there a way to do this without screwing up the entire photo?
View 2 Replies View RelatedIs there any way to tell for sure if an image has been altered?
I got some pics and when I zoom in on some areas of it it looks like the pixels arent right would one suggest that the pics have been doctored?
I currently use Photoshop CS5 and Lightroom 4.1. I am in the process of having a new computer built just for editing my photography. The board will be an ASUS P9X79 with an intel Core i7-3820 and 16 GB memory. The technician would like a recommendation of the best graphics card for editing still images.
All of my work is done in RAW from a 5D MII. 21 megapixel.
My wife and I use CS4. Lately after she edits a photo and saves it as a jpeg, something happens. It's like it doesn't save with the .jpg extention. When she goes to her pictures folder to open the file, there is a blank thumbnail and it won't open until she manually adds a .jpg to the end or sometimes it won't even save.
View 6 Replies View RelatedI have Camera Raw 5.0 through Bridge CS4 and I shoot photos on my Nikon D40X in JPEG. Should I NOT be using Camera Raw to edit my non-RAW photos? Is it degrading my images? I noticed when I did some editing and saved the photo, the new photo size was about 25% of the original JPEG size.
View 5 Replies View RelatedIf I upload a shopped image (basic editing, such as curves and selective colors for instance) on a site which anyone could see (naturally) and download if they like, can a person remove all the edit work to the point where the image returns to its first form?
View 7 Replies View RelatedIs there anyway these "eyes" can be saved some how? Or atleast just so that they aren't so ****ing shiny.It completely ruins the pictures. Obviously they can't be saved, but just make it look "not so bad"
View 8 Replies View RelatedI just want the girl here deleted from the photo or atleast cut out so it woun`t show much of her.
I attached the photo,
I was under the impression that editing in PS from LR4 meant my original in LR4 was safe (ie: that after editing in PS, both the PS editied photo and the LR4 original would be side by side when LR4 was opened up)
However, my first foray into PS was earlier today, when I double-processed an image as instructed by Scott Kelby's book (the Adobe Photoshop CS6 book - page 52). The book covers PS (not Lightroom) and camera raw, but I thought that anything edited in PS and/or camera raw would leave my original untouched. Following Scott Kelby's instructions, I did some editing in LR4, then opened in PS as a smart object, then opened a 'New Smart Object via Copy' which I did further edits on, but this time in Camera Raw.
I now had 2 versions of the photo in PS. I then did a layer mask for the foreground object, and darkened the background of the sky etc behind it, so a sort of HDR with the 2 photos. I then followed his instructions to 'Flatten Image', and then to do a levels adjustment to brighten image.
Still following the instructions, to make the image more vibrant, I went to Mode, Lab Color, Apply Image. I chose the 'a' chanel, blending mode, then switched back to RGB Color
It didn't actually say to save file, but I just did a 'File Save in PS. The only photo in LR4 was now the PS edited one. I went to before/after comparison, but just had the finished photo with Lab Color adjustments as after photo, and before photo was the combined 2 photos after editing / layer masking, but no sign of my original.
I have been reading that you should 'copy' the original in PS, but have also read that this is not necessary if you have Lightroom, So I'm confused by this. This was the first time the book touched on photoshop, so I'm surprised there was no mentioned about saving the file. I now have about 4 photoshop books, and they all talk of camera raw workflow only