so I am working on tis project in China and rainfall stats and soils are not available, instead i get a measurement of 50 year peak flow at various river sections. in order to model this in SSA I put in juctions with direct inflows at each measured section. is there anyway I can apply an SCS typeII curve to these userdefined inflows to generate volumes for sizing of detention ponds and check dams?
View 1 Replieswhy am i not allowed to have multiple direct links for a node (junction/outfall)? i have a situation where i want to add the flows to two junctions, one for each side of the property, then add the two junctions to an outfall (overall site). i do not want to model the pipes, just want to add hydro graphs.
my each junction has two direct links coming from two other upstream junctions, and then this junction flows out by a direct link to the overall site outfall (the set of junctions from the other site does the same). i cannot run the model because of the error:
ERROR 134 : Node TOTAL-EAST has more than one DIRECT outlet link or DESIGN pump.
ERROR 134 : Node TOTAL-WEST has more than one DIRECT outlet link or DESIGN pump.
I have an SSA model that has multiple on-grade inlets along a city street. Each on-grade inlet has a roadway/gutter bypass link defined (the link is defined as 'direct' in the conveyance link properties) and where applicable an upstream roadway link. Therefore most inlets have a direct link coming in and a direct link leaving to represent the gutter bypass flows. The model will successfully run under kinematic wave routing method. When changed to hydrodynamic, I get Error 134 stating:
ERROR 134 : Node CB-13 has more than one DIRECT outlet link or DESIGN pump.
I know that it is fairly self explanatory error except the error does not appear for every inlet that I have defined direct links for. Some inlets that have one incoming direct link and one outgoing direct link are not listed in the error listing, while some do. In review of the model, I do not appear to have multiple direct outlet links (I also don't recall drawing more than one per structure in my model). Based on my review of SSA documents, it seemed like modeling bypass flows using direct links as opposed to open channel flow was the most common practice. That said, if I change the outgoing direct link to open channel, that inlet is removed from the error list.
Version:2014 Civil 3D
Our company just installed Civil 3D for the first time. I am now setting it up with all required standard templates, points, linetypes, survey databases, assemblies, surface properties, profile and cross section properties. All to make it more user friendly for our company. How to do all this in a efficient manner, either files to load, or a document outlining steps to follow, etc.
View 7 Replies View RelatedI’d like to get some info about estimating time needed for a project. Nothing too exact is needed.
View 7 Replies View RelatedIs there a possibility to work in the same time on the same file on two different pc's. Like my co worker would be developing plan for road i would make profile view in that file , and he could see my changes as well as i would see his ? Can i reach this goal using shortcuts ?
View 1 Replies View Relatedis there a way to get a group of 3d polylines to elevation zero all at the same time. a 300 foot long 3dpoly i have might have a couple hundred grips on it.
View 5 Replies View Relatedthere is a way to delete multiple profiles at the same time?
Currently, I have to go through the prospector and delete them one at a time. I have an alignment with many profiles (various walls along the length of the road), but have split the drawing up into several files... How can I delete all the profiles at once?
how i can add the survey date & time from an import event into a field to show how old the data on the plan is?
View 1 Replies View RelatedIt's taking a long time to move cogo points. About 2 minutes for a single point move. Other commands affecting points are taking longer too. Would it just be a function of file size.
Sample point:
AECC_COGO_POINT Layer: "V-NODE-P-CURB-FACE"
Space: Model space
Handle = daf3e
Primary point group : Pro Face Curb
Point Number : 5198
[code]...
I have a lisp that i use on occasion so i loaded it with APPLOAD into the startup suite. now it loads and runs every time i open a drawing. how can i stop it from running...but still have it available when i need it (without having to find it and reload it)?
View 5 Replies View RelatedIt seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
View 9 Replies View Relatedgetting Civil 3D to crash every time the Map Task Pane is opened from the Ribbon? if you type in MAPWSPACE, then it seems to "initiaite" it to work ok, but if you go right to the Ribbon: View tab > Palettes panel, and click it on there, it crashes every time.
View 1 Replies View RelatedI created a date and time stamp to put on a border in paper space. The stamps were created using Mtext with a field. The stamps do not update and show the created time and date. How to create a stamp that updates?
View 8 Replies View RelatedSuppose I have a Drawing Structure like:
MasterRoot
Root1
MasterChild1
Child
MasterChild2
Child
Root2
MasterChild1
Child
MasterChild2
Child
When I use XrefGraph xg = mainDb.GetHostDwgXrefGraph(true); in Code then I get all the Files as a node including MasterRoot (say count=6).
If I want to get Only direct Children (here, Root1 and Root2)(means count=2 only), then what i have to do?
trying to create contours from an exiting survey file. I am new to Civil 3d 2012. What I need to accomplish is create a 3d topo from the points with contours and then create a 3d model of the area.
View 9 Replies View RelatedWhere the CUI custom files are so I can use them to update a new install of Acad 2010? My computer crashed, and I had to reinstall from scratch, so I just need to get the customization files off the old hard drive and put them somewhere to use for the new install.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
Using Acad release 12. Have there been any fixes to direct entry. Draw a 3d 6" cube. On the top surface draw a 2" line from a corner by moving your curser in the direction you wish to go, direct enter 2". It will be a 3" line. Move with direct entry also does not work when placing an object on an object.
View 7 Replies View RelatedOk some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies View RelatedI'm just starting to learn how to use the 3D environment in AutoCAD (2014 version). I'm following some tutorials but I'm a bit confused regarding direct input values when using the polyline command.
I've drawn a 50mm square, starting at coordinate 130,130,0 (lower left corner) using the polyline command (NOT using the Close command to complete the square). The next step then states draw a second polyline using the following input @7<45,55 to locate the first corner, then draw a 40mm square. It doesn't quite put the inner square where I'd have expected it so I wanted to tweek the command to correct any error but I haven't used the @ symbol or < sign before. What the input description means? From testing it appears to base the starting point of the inner square in relation to the outer square.
add the direct to PDF icon menu item to AutoCAD 2012.
View 4 Replies View RelatedI note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
Direct connect is broken in maya 2014 osx. This now means that dwg, dxf and iges will not import. I have the latest Service pack 1 installed but still no go! This means the only work flow is to do it on a windows version of maya then open it in the Mac.
View 2 Replies View RelatedWe have a bunch of cad files that are loaded onto a sharepoint. Some these users who have read access only are having difficulties opening the files in autocad LT 2012 because .dwl and .dwl2 files trying to be created on the sharepoint site. Is there a way to redirect these files to their locally to their computer? I would like to avoid giving the users write permissions to the site.
View 1 Replies View RelatedWith iLogic, define some pre notes and when the user choose one option some notes are chosen too.The idea now is: Create a text direct inside on Sketched Symbol OR edit some textfields inside the Symbol.
The symbol could be one existent, so its not necessary to create it.
I got a code to create the text, and that works perfectly! Just what im trying now is create this text into the Symbol... I've tried many ways with reference from: URLs....The code to create the tet im usnig is this one:
' a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument ' a reference to the active sheet. Dim oActiveSheet As Sheet oActiveSheet = oDrawDoc.ActiveSheet ' a reference to the GeneralNotes object Dim oGeneralNotes As GeneralNotes oGeneralNotes = oActiveSheet.DrawingNotes.GeneralNotes Dim oTG As TransientGeometry oTG = ThisApplication.TransientGeometry ' Create text with simple string as input. Since this doesn't use ' any text.
[code]....
but, if i could just edit one existent text filed into the symbol would be great too and one "extra doubt", in all the codes that i get here, i have to erase the "public sub" and the "set" from all code, am I doing something wrong ? I'm running directly from the iLogic window.
Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
I am playing with a design in simulation where the balance is effected by gravity. I have a part at a set angle to start off so a constraint is place and set to this angle,then in simulation I suppress the angle prior to starting the simulation to see what happens. Then I unsuppress the angle then edit it to adjust the simulation to a new angle I then resupress the angle to free it up and run the simulation again.
This can go on a few times until the angle is found in the simulation.The problem I have is it takes ages to do this. Basically it seems in simulation the tree is always collapsed and I want it expanded, how ever after each change the tree collapses?
Is there a way to have the tree always expanded so I can quickly find and adjust my constraint? Or even better is there a way to pull the constraint into the main edit window for direct editing?
It would be good if a small bow / window could be opened with the ability to add a setting/constraignt that needs constant updating.
I am facing small problem with inverter drafting. I am unable to show hidden line of pattern by direct selection of all object . I have to select one by one item from pattern.
In my drawing there is tie rod item ( find attached file) i have shown hidden line of only this part . and i have to select all items one by one.
We just got our updated release of AutoCAD 2012 and I noticed it now supports direct import of Pro-E models, which is what our engineering department uses for one reason or another...
I'm currently using 3DS Max 2011... If Max 2012 support direct import of Pro-E models like AutoCAD is now doing??? It would be REALLY handy! Currently they export a either an STL or OBJ to me that I then can import into Max... would be nice if I could just take their native file and run with it!
Is a direct upgrade from LR 3 (v.3.6) to LR 5.0 possible?As a rule, how many versions can a user be behind? 2, 3?
View 3 Replies View RelatedI have been working with Corel VideoStudio X2, X3 and X4 from a long time now. At this moment I have to questions:
- where to find more templates (eg direct projects) other than the free downloads and the ones on the new Corel share site
- how to move the templates from X3 to X4?